| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20221014163718.00000042@huawei.com>
Date: Fri, 14 Oct 2022 16:37:33 +0100
From: Jonathan Cameron <Jonathan.Cameron@...wei.com>
To: Cosmin Tanislav <demonsingur@...il.com>
CC: Nuno Sá <nuno.sa@...log.com>,
Lars-Peter Clausen <lars@...afoo.de>,
Michael Hennerich <Michael.Hennerich@...log.com>,
"Jonathan Cameron" <jic23@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@...aro.org>,
<linux-iio@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
Cosmin Tanislav <cosmin.tanislav@...log.com>
Subject: Re: [PATCH 2/3] dt-bindings: iio: temperature: ltc2983: support
more parts
On Fri, 14 Oct 2022 15:37:23 +0300
Cosmin Tanislav <demonsingur@...il.com> wrote:
> From: Cosmin Tanislav <cosmin.tanislav@...log.com>
>
> Add support for the following parts:
> * LTC2984
> * LTC2986
> * LTM2985
>
> The LTC2984 is a variant of the LTC2983 with EEPROM.
> The LTC2986 is a variant of the LTC2983 with only 10 channels,
> EEPROM and support for active analog temperature sensors.
If they 'work' but with fewer features, perhaps a fallback
compatible?
> The LTM2985 is software-compatible with the LTC2986.
Fallback compatible?
>
> Signed-off-by: Cosmin Tanislav <cosmin.tanislav@...log.com>
> ---
> .../bindings/iio/temperature/adi,ltc2983.yaml | 63 +++++++++++++++++--
> 1 file changed, 59 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
> index 722781aa4697..c33ab524fb64 100644
> --- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
> +++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
> @@ -4,19 +4,27 @@
> $id: http://devicetree.org/schemas/iio/temperature/adi,ltc2983.yaml#
> $schema: http://devicetree.org/meta-schemas/core.yaml#
>
> -title: Analog Devices LTC2983 Multi-sensor Temperature system
> +title: Analog Devices LTC2983, LTC2986, LTM2985 Multi-sensor Temperature system
>
> maintainers:
> - Nuno Sá <nuno.sa@...log.com>
>
> description: |
> - Analog Devices LTC2983 Multi-Sensor Digital Temperature Measurement System
> + Analog Devices LTC2983, LTC2984, LTC2986, LTM2985 Multi-Sensor Digital
> + Temperature Measurement Systems
> +
> https://www.analog.com/media/en/technical-documentation/data-sheets/2983fc.pdf
> + https://www.analog.com/media/en/technical-documentation/data-sheets/2984fb.pdf
> + https://www.analog.com/media/en/technical-documentation/data-sheets/29861fa.pdf
> + https://www.analog.com/media/en/technical-documentation/data-sheets/ltm2985.pdf
>
> properties:
> compatible:
> enum:
> - adi,ltc2983
> + - adi,ltc2984
> + - adi,ltc2986
> + - adi,ltm2985
>
> reg:
> maxItems: 1
> @@ -26,7 +34,7 @@ properties:
>
> adi,mux-delay-config-us:
> description:
> - The LTC2983 performs 2 or 3 internal conversion cycles per temperature
> + The device performs 2 or 3 internal conversion cycles per temperature
Definitely a lesson here in avoiding device names in the descriptions!
> result. Each conversion cycle is performed with different excitation and
> input multiplexer configurations. Prior to each conversion, these
> excitation circuits and input switch configurations are changed and an
> @@ -145,7 +153,7 @@ patternProperties:
> adi,three-conversion-cycles:
> description:
> Boolean property which set's three conversion cycles removing
> - parasitic resistance effects between the LTC2983 and the diode.
> + parasitic resistance effects between the device and the diode.
> type: boolean
>
> adi,average-on:
> @@ -353,6 +361,41 @@ patternProperties:
> description: Boolean property which set's the adc as single-ended.
> type: boolean
>
> + "^temp@":
> + type: object
> + description:
> + Represents a channel which is being used as an active analog temperature
> + sensor.
> +
> + properties:
> + adi,sensor-type:
> + description:
> + Identifies the sensor as an active analog temperature sensor.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + const: 31
Ah. This is a bit odd as it's fixed for the channel type. However there
is precedence in this binding so fair enough.
> +
> + adi,single-ended:
> + description: Boolean property which sets the sensor as single-ended.
> + type: boolean
> +
> + adi,custom-temp:
> + description:
> + This is a table, where each entry should be a pair of
> + voltage(mv)-temperature(K). The entries must be given in nv and uK
> + so that, the original values must be multiplied by 1000000. For
> + more details look at table 71 and 72.
> + Note should be signed, but dtc doesn't currently maintain the
> + sign.
> + $ref: /schemas/types.yaml#/definitions/uint64-matrix
> + minItems: 3
> + maxItems: 64
> + items:
> + minItems: 2
> + maxItems: 2
> +
> + required:
> + - adi,custom-temp
> +
> "^rsense@":
> type: object
> description:
> @@ -382,6 +425,18 @@ required:
> - reg
> - interrupts
>
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - adi,ltc2983
> + - adi,ltc2984
> + then:
> + patternProperties:
> + "^temp@": false
> +
> additionalProperties: false
>
> examples:
Powered by blists - more mailing lists