linux-kernel - Re: [PATCH V7 6/7] remoteproc: imx_rproc: request mbox channel later

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20221014174903.GA4125124@p14s>
Date:   Fri, 14 Oct 2022 11:49:03 -0600
From:   Mathieu Poirier <mathieu.poirier@...aro.org>
To:     "Peng Fan (OSS)" <peng.fan@....nxp.com>
Cc:     andersson@...nel.org, robh+dt@...nel.org,
        krzysztof.kozlowski+dt@...aro.org, shawnguo@...nel.org,
        s.hauer@...gutronix.de, kernel@...gutronix.de, festevam@...il.com,
        linux-imx@....com, linux-remoteproc@...r.kernel.org,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org, Peng Fan <peng.fan@....com>
Subject: Re: [PATCH V7 6/7] remoteproc: imx_rproc: request mbox channel later

On Fri, Oct 14, 2022 at 11:10:36AM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@....com>
> 
> It is possible that when remote processor crash, the communication
> channel will be broken with garbage value in mailbox, such as
> when Linux is issuing a message through mailbox, remote processor
> crashes, we need free & rebuild the mailbox channels to make sure
> no garbage value in mailbox channels.
> 
> So move the request/free to start/stop for managing remote procesosr in
> Linux, move to attach/detach for remote processor is out of control of
> Linux.
> 
> Previous, we just request mbox when attach for CM4 boot early before
> Linux, but if mbox defer probe, remoteproc core will do resource cleanup
> and corrupt resource table for later probe.
> 
> So move request mbox ealier and still keep mbox request when attach
> for self recovery case, but keep a check when request/free mbox.
> 
> Signed-off-by: Peng Fan <peng.fan@....com>
> ---
>  drivers/remoteproc/imx_rproc.c | 39 ++++++++++++++++++++++++++++++++--
>  1 file changed, 37 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
> index 917e6db39572..1183de84a4c0 100644
> --- a/drivers/remoteproc/imx_rproc.c
> +++ b/drivers/remoteproc/imx_rproc.c
> @@ -84,6 +84,8 @@ struct imx_rproc_mem {
>  #define ATT_CORE_MASK   0xffff
>  #define ATT_CORE(I)     BIT((I))
>  
> +static int imx_rproc_xtr_mbox_init(struct rproc *rproc);
> +static void imx_rproc_free_mbox(struct rproc *rproc);
>  static int imx_rproc_detach_pd(struct rproc *rproc);
>  
>  struct imx_rproc {
> @@ -357,6 +359,10 @@ static int imx_rproc_start(struct rproc *rproc)
>  	struct arm_smccc_res res;
>  	int ret;
>  
> +	ret = imx_rproc_xtr_mbox_init(rproc);
> +	if (ret)
> +		return ret;
> +
>  	switch (dcfg->method) {
>  	case IMX_RPROC_MMIO:
>  		ret = regmap_update_bits(priv->regmap, dcfg->src_reg, dcfg->src_mask,
> @@ -407,6 +413,8 @@ static int imx_rproc_stop(struct rproc *rproc)
>  
>  	if (ret)
>  		dev_err(dev, "Failed to stop remote core\n");
> +	else
> +		imx_rproc_free_mbox(rproc);
>  
>  	return ret;
>  }
> @@ -592,6 +600,22 @@ static void imx_rproc_kick(struct rproc *rproc, int vqid)
>  
>  static int imx_rproc_attach(struct rproc *rproc)
>  {
> +	return imx_rproc_xtr_mbox_init(rproc);
> +}
> +
> +static int imx_rproc_detach(struct rproc *rproc)
> +{
> +	struct imx_rproc *priv = rproc->priv;
> +	const struct imx_rproc_dcfg *dcfg = priv->dcfg;
> +
> +	if (dcfg->method != IMX_RPROC_SCU_API)
> +		return -EOPNOTSUPP;
> +
> +	if (imx_sc_rm_is_resource_owned(priv->ipc_handle, priv->rsrc_id))
> +		return -EOPNOTSUPP;
> +
> +	imx_rproc_free_mbox(rproc);
> +
>  	return 0;
>  }
>  
> @@ -610,6 +634,7 @@ static struct resource_table *imx_rproc_get_loaded_rsc_table(struct rproc *rproc
>  static const struct rproc_ops imx_rproc_ops = {
>  	.prepare	= imx_rproc_prepare,
>  	.attach		= imx_rproc_attach,
> +	.detach		= imx_rproc_detach,
>  	.start		= imx_rproc_start,
>  	.stop		= imx_rproc_stop,
>  	.kick		= imx_rproc_kick,
> @@ -720,6 +745,9 @@ static int imx_rproc_xtr_mbox_init(struct rproc *rproc)
>  	struct device *dev = priv->dev;
>  	struct mbox_client *cl;
>  
> +	if (priv->tx_ch && priv->rx_ch)
> +		return 0;
> +

You did exactly the same things as in V6.  I asked you why this is needed and
all you did is point me to the code in _probe(), which I can read on my own.

Again - why is this needed when we know it will be done in start() and attach()?


>  	if (!of_get_property(dev->of_node, "mbox-names", NULL))
>  		return 0;
>  
> @@ -749,8 +777,15 @@ static void imx_rproc_free_mbox(struct rproc *rproc)
>  {
>  	struct imx_rproc *priv = rproc->priv;
>  
> -	mbox_free_channel(priv->tx_ch);
> -	mbox_free_channel(priv->rx_ch);
> +	if (priv->tx_ch) {
> +		mbox_free_channel(priv->tx_ch);
> +		priv->tx_ch = NULL;
> +	}
> +
> +	if (priv->rx_ch) {
> +		mbox_free_channel(priv->rx_ch);
> +		priv->rx_ch = NULL;
> +	}
>  }
>  
>  static void imx_rproc_put_scu(struct rproc *rproc)
> -- 
> 2.37.1
>