[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <Y0rt8FIkRniuv0l4@pendragon.ideasonboard.com>
Date: Sat, 15 Oct 2022 20:29:20 +0300
From: Laurent Pinchart <laurent.pinchart@...asonboard.com>
To: Maxime Ripard <maxime@...no.tech>
Cc: Maxime Ripard <mripard@...nel.org>, Eric Anholt <eric@...olt.net>,
Daniel Vetter <daniel@...ll.ch>,
David Airlie <airlied@...ux.ie>, Rob Herring <robh@...nel.org>,
Emma Anholt <emma@...olt.net>, dri-devel@...ts.freedesktop.org,
Joerg Quinten <aBUGSworstnightmare@...il.com>,
Chris Morgan <macromorgan@...mail.com>,
Dave Stevenson <dave.stevenson@...pberrypi.com>,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 4/7] drm/vc4: dpi: Support RGB565 format
Hi Maxime and Chris,
Thank you for the patch.
On Thu, Oct 13, 2022 at 11:56:48AM +0200, Maxime Ripard wrote:
> From: Chris Morgan <macromorgan@...mail.com>
>
> The RGB565 format with padding over 24 bits
> (MEDIA_BUS_FMT_RGB565_1X24_CPADHI) is supported by the vc4 DPI
> controller as "mode 3". This is what the Geekworm MZP280 DPI display
The code below uses DPI_FORMAT_16BIT_565_RGB_2. Is that mode 3, or
should the commit message refer to mode 2 ?
With this fixed,
Reviewed-by: Laurent Pinchart <laurent.pinchart@...asonboard.com>
> uses, so let's add support for it in the DPI controller driver.
>
> Reviewed-by: Dave Stevenson <dave.stevenson@...pberrypi.com>
> Signed-off-by: Chris Morgan <macromorgan@...mail.com>
> Signed-off-by: Maxime Ripard <maxime@...no.tech>
> ---
> drivers/gpu/drm/vc4/vc4_dpi.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/gpu/drm/vc4/vc4_dpi.c b/drivers/gpu/drm/vc4/vc4_dpi.c
> index 1f8f44b7b5a5..7da3dd1db50e 100644
> --- a/drivers/gpu/drm/vc4/vc4_dpi.c
> +++ b/drivers/gpu/drm/vc4/vc4_dpi.c
> @@ -182,6 +182,10 @@ static void vc4_dpi_encoder_enable(struct drm_encoder *encoder)
> dpi_c |= VC4_SET_FIELD(DPI_FORMAT_16BIT_565_RGB_3,
> DPI_FORMAT);
> break;
> + case MEDIA_BUS_FMT_RGB565_1X24_CPADHI:
> + dpi_c |= VC4_SET_FIELD(DPI_FORMAT_16BIT_565_RGB_2,
> + DPI_FORMAT);
> + break;
> default:
> DRM_ERROR("Unknown media bus format %d\n",
> bus_format);
>
--
Regards,
Laurent Pinchart
Powered by blists - more mailing lists