| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221016172212.49105-8-krzysztof.kozlowski@linaro.org>
Date: Sun, 16 Oct 2022 13:22:02 -0400
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...ainline.org>,
Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
linux-arm-msm@...r.kernel.org, linux-gpio@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH v3 07/17] arm64: dts: qcom: msm8953: align TLMM pin configuration with DT schema
DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.
qcom/sdm632-fairphone-fp3.dtb: pinctrl@...0000: 'cd-off-pins', 'cd-on-pins', 'gpio-key-default-pins', ....
do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
Reviewed-by: Konrad Dybcio <konrad.dybcio@...ainline.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
arch/arm64/boot/dts/qcom/msm8953.dtsi | 70 +++++++++++++--------------
1 file changed, 35 insertions(+), 35 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
index 6b992a6d56c1..db94e6fd18f5 100644
--- a/arch/arm64/boot/dts/qcom/msm8953.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -460,229 +460,229 @@ tlmm: pinctrl@...0000 {
interrupt-controller;
#interrupt-cells = <2>;
- uart_console_active: uart-console-active-pins {
+ uart_console_active: uart-console-active-state {
pins = "gpio4", "gpio5";
function = "blsp_uart2";
drive-strength = <2>;
bias-disable;
};
- uart_console_sleep: uart-console-sleep-pins {
+ uart_console_sleep: uart-console-sleep-state {
pins = "gpio4", "gpio5";
function = "blsp_uart2";
drive-strength = <2>;
bias-pull-down;
};
- sdc1_clk_on: sdc1-clk-on-pins {
+ sdc1_clk_on: sdc1-clk-on-state {
pins = "sdc1_clk";
bias-disable;
drive-strength = <16>;
};
- sdc1_clk_off: sdc1-clk-off-pins {
+ sdc1_clk_off: sdc1-clk-off-state {
pins = "sdc1_clk";
bias-disable;
drive-strength = <2>;
};
- sdc1_cmd_on: sdc1-cmd-on-pins {
+ sdc1_cmd_on: sdc1-cmd-on-state {
pins = "sdc1_cmd";
bias-disable;
drive-strength = <10>;
};
- sdc1_cmd_off: sdc1-cmd-off-pins {
+ sdc1_cmd_off: sdc1-cmd-off-state {
pins = "sdc1_cmd";
bias-disable;
drive-strength = <2>;
};
- sdc1_data_on: sdc1-data-on-pins {
+ sdc1_data_on: sdc1-data-on-state {
pins = "sdc1_data";
bias-pull-up;
drive-strength = <10>;
};
- sdc1_data_off: sdc1-data-off-pins {
+ sdc1_data_off: sdc1-data-off-state {
pins = "sdc1_data";
bias-pull-up;
drive-strength = <2>;
};
- sdc1_rclk_on: sdc1-rclk-on-pins {
+ sdc1_rclk_on: sdc1-rclk-on-state {
pins = "sdc1_rclk";
bias-pull-down;
};
- sdc1_rclk_off: sdc1-rclk-off-pins {
+ sdc1_rclk_off: sdc1-rclk-off-state {
pins = "sdc1_rclk";
bias-pull-down;
};
- sdc2_clk_on: sdc2-clk-on-pins {
+ sdc2_clk_on: sdc2-clk-on-state {
pins = "sdc2_clk";
drive-strength = <16>;
bias-disable;
};
- sdc2_clk_off: sdc2-clk-off-pins {
+ sdc2_clk_off: sdc2-clk-off-state {
pins = "sdc2_clk";
bias-disable;
drive-strength = <2>;
};
- sdc2_cmd_on: sdc2-cmd-on-pins {
+ sdc2_cmd_on: sdc2-cmd-on-state {
pins = "sdc2_cmd";
bias-pull-up;
drive-strength = <10>;
};
- sdc2_cmd_off: sdc2-cmd-off-pins {
+ sdc2_cmd_off: sdc2-cmd-off-state {
pins = "sdc2_cmd";
bias-pull-up;
drive-strength = <2>;
};
- sdc2_data_on: sdc2-data-on-pins {
+ sdc2_data_on: sdc2-data-on-state {
pins = "sdc2_data";
bias-pull-up;
drive-strength = <10>;
};
- sdc2_data_off: sdc2-data-off-pins {
+ sdc2_data_off: sdc2-data-off-state {
pins = "sdc2_data";
bias-pull-up;
drive-strength = <2>;
};
- sdc2_cd_on: cd-on-pins {
+ sdc2_cd_on: cd-on-state {
pins = "gpio133";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
- sdc2_cd_off: cd-off-pins {
+ sdc2_cd_off: cd-off-state {
pins = "gpio133";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
- gpio_key_default: gpio-key-default-pins {
+ gpio_key_default: gpio-key-default-state {
pins = "gpio85";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
- i2c_1_default: i2c-1-default-pins {
+ i2c_1_default: i2c-1-default-state {
pins = "gpio2", "gpio3";
function = "blsp_i2c1";
drive-strength = <2>;
bias-disable;
};
- i2c_1_sleep: i2c-1-sleep-pins {
+ i2c_1_sleep: i2c-1-sleep-state {
pins = "gpio2", "gpio3";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
- i2c_2_default: i2c-2-default-pins {
+ i2c_2_default: i2c-2-default-state {
pins = "gpio6", "gpio7";
function = "blsp_i2c2";
drive-strength = <2>;
bias-disable;
};
- i2c_2_sleep: i2c-2-sleep-pins {
+ i2c_2_sleep: i2c-2-sleep-state {
pins = "gpio6", "gpio7";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
- i2c_3_default: i2c-3-default-pins {
+ i2c_3_default: i2c-3-default-state {
pins = "gpio10", "gpio11";
function = "blsp_i2c3";
drive-strength = <2>;
bias-disable;
};
- i2c_3_sleep: i2c-3-sleep-pins {
+ i2c_3_sleep: i2c-3-sleep-state {
pins = "gpio10", "gpio11";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
- i2c_4_default: i2c-4-default-pins {
+ i2c_4_default: i2c-4-default-state {
pins = "gpio14", "gpio15";
function = "blsp_i2c4";
drive-strength = <2>;
bias-disable;
};
- i2c_4_sleep: i2c-4-sleep-pins {
+ i2c_4_sleep: i2c-4-sleep-state {
pins = "gpio14", "gpio15";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
- i2c_5_default: i2c-5-default-pins {
+ i2c_5_default: i2c-5-default-state {
pins = "gpio18", "gpio19";
function = "blsp_i2c5";
drive-strength = <2>;
bias-disable;
};
- i2c_5_sleep: i2c-5-sleep-pins {
+ i2c_5_sleep: i2c-5-sleep-state {
pins = "gpio18", "gpio19";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
- i2c_6_default: i2c-6-default-pins {
+ i2c_6_default: i2c-6-default-state {
pins = "gpio22", "gpio23";
function = "blsp_i2c6";
drive-strength = <2>;
bias-disable;
};
- i2c_6_sleep: i2c-6-sleep-pins {
+ i2c_6_sleep: i2c-6-sleep-state {
pins = "gpio22", "gpio23";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
- i2c_7_default: i2c-7-default-pins {
+ i2c_7_default: i2c-7-default-state {
pins = "gpio135", "gpio136";
function = "blsp_i2c7";
drive-strength = <2>;
bias-disable;
};
- i2c_7_sleep: i2c-7-sleep-pins {
+ i2c_7_sleep: i2c-7-sleep-state {
pins = "gpio135", "gpio136";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
- i2c_8_default: i2c-8-default-pins {
+ i2c_8_default: i2c-8-default-state {
pins = "gpio98", "gpio99";
function = "blsp_i2c8";
drive-strength = <2>;
bias-disable;
};
- i2c_8_sleep: i2c-8-sleep-pins {
+ i2c_8_sleep: i2c-8-sleep-state {
pins = "gpio98", "gpio99";
function = "gpio";
drive-strength = <2>;
--
2.34.1
Powered by blists - more mailing lists