| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221017091153.454873-19-victor.shih@genesyslogic.com.tw>
Date: Mon, 17 Oct 2022 17:11:45 +0800
From: Victor Shih <victorshihgli@...il.com>
To: ulf.hansson@...aro.org, adrian.hunter@...el.com
Cc: linux-mmc@...r.kernel.org, linux-kernel@...r.kernel.org,
benchuanggli@...il.com, HL.Liu@...esyslogic.com.tw,
Greg.tu@...esyslogic.com.tw, takahiro.akashi@...aro.org,
dlunev@...omium.org, Victor Shih <victor.shih@...esyslogic.com.tw>,
Ben Chuang <ben.chuang@...esyslogic.com.tw>
Subject: [PATCH V5 18/26] mmc: sdhci-uhs2: add uhs2_control() to initialise the interface
This is a sdhci version of mmc's uhs2_set_reg operation.
UHS-II interface (related registers) will be initialised here.
Signed-off-by: Ben Chuang <ben.chuang@...esyslogic.com.tw>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@...aro.org>
Signed-off-by: Victor Shih <victor.shih@...esyslogic.com.tw>
---
drivers/mmc/host/sdhci-uhs2.c | 115 ++++++++++++++++++++++++++++++++++
1 file changed, 115 insertions(+)
diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c
index 3f3665d7990c..b0e6403ed31f 100644
--- a/drivers/mmc/host/sdhci-uhs2.c
+++ b/drivers/mmc/host/sdhci-uhs2.c
@@ -350,6 +350,65 @@ static void __sdhci_uhs2_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
spin_unlock_irqrestore(&host->lock, flags);
}
+/* TODO: move this function to sdhci.c */
+static void sdhci_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set)
+{
+ u32 ier;
+
+ ier = sdhci_readl(host, SDHCI_INT_ENABLE);
+ ier &= ~clear;
+ ier |= set;
+ sdhci_writel(host, ier, SDHCI_INT_ENABLE);
+ sdhci_writel(host, ier, SDHCI_SIGNAL_ENABLE);
+}
+
+static void sdhci_uhs2_set_config(struct sdhci_host *host)
+{
+ u32 value;
+ u16 sdhci_uhs2_set_ptr = sdhci_readw(host, SDHCI_UHS2_SET_PTR);
+ u16 sdhci_uhs2_gen_set_reg = (sdhci_uhs2_set_ptr + 0);
+ u16 sdhci_uhs2_phy_set_reg = (sdhci_uhs2_set_ptr + 4);
+ u16 sdhci_uhs2_tran_set_reg = (sdhci_uhs2_set_ptr + 8);
+ u16 sdhci_uhs2_tran_set_1_reg = (sdhci_uhs2_set_ptr + 12);
+
+ /* Set Gen Settings */
+ sdhci_writel(host, host->mmc->uhs2_caps.n_lanes_set <<
+ SDHCI_UHS2_GEN_SET_N_LANES_POS, sdhci_uhs2_gen_set_reg);
+
+ /* Set PHY Settings */
+ value = (host->mmc->uhs2_caps.n_lss_dir_set <<
+ SDHCI_UHS2_PHY_SET_N_LSS_DIR_POS) |
+ (host->mmc->uhs2_caps.n_lss_sync_set <<
+ SDHCI_UHS2_PHY_SET_N_LSS_SYN_POS);
+ if (host->mmc->flags & MMC_UHS2_SPEED_B)
+ value |= 1 << SDHCI_UHS2_PHY_SET_SPEED_POS;
+ sdhci_writel(host, value, sdhci_uhs2_phy_set_reg);
+
+ /* Set LINK-TRAN Settings */
+ value = (host->mmc->uhs2_caps.max_retry_set <<
+ SDHCI_UHS2_TRAN_SET_RETRY_CNT_POS) |
+ (host->mmc->uhs2_caps.n_fcu_set <<
+ SDHCI_UHS2_TRAN_SET_N_FCU_POS);
+ sdhci_writel(host, value, sdhci_uhs2_tran_set_reg);
+ sdhci_writel(host, host->mmc->uhs2_caps.n_data_gap_set,
+ sdhci_uhs2_tran_set_1_reg);
+}
+
+static int sdhci_uhs2_check_dormant(struct sdhci_host *host)
+{
+ u32 val;
+ /* 100ms */
+ int timeout = 100000;
+
+ if (read_poll_timeout_atomic(sdhci_readl, val, (val & SDHCI_UHS2_IN_DORMANT_STATE),
+ 100, timeout, true, host, SDHCI_PRESENT_STATE)) {
+ pr_warn("%s: UHS2 IN_DORMANT fail in 100ms.\n", mmc_hostname(host->mmc));
+ sdhci_dumpregs(host);
+ return -EIO;
+ }
+ return 0;
+}
+
/*****************************************************************************\
* *
* MMC callbacks *
@@ -435,6 +494,61 @@ static int sdhci_uhs2_enable_clk(struct mmc_host *mmc)
return 0;
}
+static int sdhci_uhs2_do_detect_init(struct mmc_host *mmc);
+
+static int sdhci_uhs2_control(struct mmc_host *mmc, enum sd_uhs2_operation op)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ unsigned long flags;
+ int err = 0;
+ u16 sdhci_uhs2_set_ptr = sdhci_readw(host, SDHCI_UHS2_SET_PTR);
+ u16 sdhci_uhs2_phy_set_reg = (sdhci_uhs2_set_ptr + 4);
+
+ DBG("Begin %s, act %d.\n", __func__, op);
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ switch (op) {
+ case UHS2_PHY_INIT:
+ err = sdhci_uhs2_do_detect_init(mmc);
+ break;
+ case UHS2_SET_CONFIG:
+ sdhci_uhs2_set_config(host);
+ break;
+ case UHS2_ENABLE_INT:
+ sdhci_clear_set_irqs(host, 0, SDHCI_INT_CARD_INT);
+ break;
+ case UHS2_DISABLE_INT:
+ sdhci_clear_set_irqs(host, SDHCI_INT_CARD_INT, 0);
+ break;
+ case UHS2_SET_SPEED_B:
+ sdhci_writeb(host, 1 << SDHCI_UHS2_PHY_SET_SPEED_POS,
+ sdhci_uhs2_phy_set_reg);
+ break;
+ case UHS2_CHECK_DORMANT:
+ err = sdhci_uhs2_check_dormant(host);
+ break;
+ case UHS2_DISABLE_CLK:
+ err = sdhci_uhs2_disable_clk(mmc);
+ break;
+ case UHS2_ENABLE_CLK:
+ err = sdhci_uhs2_enable_clk(mmc);
+ break;
+ case UHS2_POST_ATTACH_SD:
+ host->ops->uhs2_post_attach_sd(host);
+ break;
+ default:
+ pr_err("%s: input sd uhs2 operation %d is wrong!\n",
+ mmc_hostname(host->mmc), op);
+ err = -EIO;
+ break;
+ }
+
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ return err;
+}
+
/*****************************************************************************\
* *
* Driver init/exit *
@@ -593,6 +707,7 @@ static int sdhci_uhs2_host_ops_init(struct sdhci_host *host)
host->mmc_host_ops.start_signal_voltage_switch =
sdhci_uhs2_start_signal_voltage_switch;
host->mmc_host_ops.uhs2_set_ios = sdhci_uhs2_set_ios;
+ host->mmc_host_ops.uhs2_control = sdhci_uhs2_control;
if (!host->mmc_host_ops.uhs2_detect_init)
host->mmc_host_ops.uhs2_detect_init = sdhci_uhs2_do_detect_init;
--
2.25.1
Powered by blists - more mailing lists