| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221017091153.454873-13-victor.shih@genesyslogic.com.tw>
Date: Mon, 17 Oct 2022 17:11:39 +0800
From: Victor Shih <victorshihgli@...il.com>
To: ulf.hansson@...aro.org, adrian.hunter@...el.com
Cc: linux-mmc@...r.kernel.org, linux-kernel@...r.kernel.org,
benchuanggli@...il.com, HL.Liu@...esyslogic.com.tw,
Greg.tu@...esyslogic.com.tw, takahiro.akashi@...aro.org,
dlunev@...omium.org, Victor Shih <victor.shih@...esyslogic.com.tw>,
Ben Chuang <ben.chuang@...esyslogic.com.tw>
Subject: [PATCH V5 12/26] mmc: sdhci-uhs2: add set_power() to support vdd2
This is a UHS-II version of sdhci's set_power operation.
VDD2, as well as VDD, is handled here.
Signed-off-by: Ben Chuang <ben.chuang@...esyslogic.com.tw>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@...aro.org>
Signed-off-by: Victor Shih <victor.shih@...esyslogic.com.tw>
---
drivers/mmc/host/sdhci-uhs2.c | 79 +++++++++++++++++++++++++++++++++++
drivers/mmc/host/sdhci-uhs2.h | 2 +
drivers/mmc/host/sdhci.c | 66 ++++++++++++++++-------------
drivers/mmc/host/sdhci.h | 2 +
4 files changed, 120 insertions(+), 29 deletions(-)
diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c
index 0e82f98d1967..896a1c8e55cf 100644
--- a/drivers/mmc/host/sdhci-uhs2.c
+++ b/drivers/mmc/host/sdhci-uhs2.c
@@ -117,6 +117,85 @@ void sdhci_uhs2_reset(struct sdhci_host *host, u16 mask)
}
EXPORT_SYMBOL_GPL(sdhci_uhs2_reset);
+void sdhci_uhs2_set_power(struct sdhci_host *host, unsigned char mode,
+ unsigned short vdd)
+{
+ struct mmc_host *mmc = host->mmc;
+ u8 pwr;
+
+ /* FIXME: check if flags & MMC_UHS2_SUPPORT? */
+ if (!(sdhci_uhs2_mode(host))) {
+ sdhci_set_power(host, mode, vdd);
+ return;
+ }
+
+ if (mode != MMC_POWER_OFF) {
+ pwr = sdhci_get_vdd_value(vdd);
+ if (!pwr)
+ WARN(1, "%s: Invalid vdd %#x\n",
+ mmc_hostname(host->mmc), vdd);
+ pwr |= SDHCI_VDD2_POWER_180;
+ }
+
+ if (host->pwr == pwr)
+ return;
+ host->pwr = pwr;
+
+ if (pwr == 0) {
+ sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
+
+ if (!IS_ERR(host->mmc->supply.vmmc))
+ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
+ if (!IS_ERR_OR_NULL(host->mmc->supply.vmmc2))
+ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc2, 0);
+
+ if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON)
+ sdhci_runtime_pm_bus_off(host);
+ } else {
+ if (!IS_ERR(host->mmc->supply.vmmc))
+ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
+ if (!IS_ERR_OR_NULL(host->mmc->supply.vmmc2))
+ /* support 1.8v only for now */
+ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc2,
+ fls(MMC_VDD2_165_195) - 1);
+
+ /*
+ * Spec says that we should clear the power reg before setting
+ * a new value. Some controllers don't seem to like this though.
+ */
+ if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
+ sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
+
+ /*
+ * At least the Marvell CaFe chip gets confused if we set the
+ * voltage and set turn on power at the same time, so set the
+ * voltage first.
+ */
+ if (host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER)
+ sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
+
+ /* vdd first */
+ pwr |= SDHCI_POWER_ON;
+ sdhci_writeb(host, pwr & 0xf, SDHCI_POWER_CONTROL);
+ mdelay(5);
+
+ pwr |= SDHCI_VDD2_POWER_ON;
+ sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
+ mdelay(5);
+
+ if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON)
+ sdhci_runtime_pm_bus_on(host);
+
+ /*
+ * Some controllers need an extra 10ms delay of 10ms before
+ * they can apply clock after applying power
+ */
+ if (host->quirks & SDHCI_QUIRK_DELAY_AFTER_POWER)
+ mdelay(10);
+ }
+}
+EXPORT_SYMBOL_GPL(sdhci_uhs2_set_power);
+
/*****************************************************************************\
* *
* Driver init/exit *
diff --git a/drivers/mmc/host/sdhci-uhs2.h b/drivers/mmc/host/sdhci-uhs2.h
index 31776dcca5cf..3179915f7f79 100644
--- a/drivers/mmc/host/sdhci-uhs2.h
+++ b/drivers/mmc/host/sdhci-uhs2.h
@@ -213,5 +213,7 @@ struct sdhci_host;
void sdhci_uhs2_dump_regs(struct sdhci_host *host);
bool sdhci_uhs2_mode(struct sdhci_host *host);
void sdhci_uhs2_reset(struct sdhci_host *host, u16 mask);
+void sdhci_uhs2_set_power(struct sdhci_host *host, unsigned char mode,
+ unsigned short vdd);
#endif /* __SDHCI_UHS2_H */
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index ab7ea55d9864..509e34f46659 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -23,7 +23,7 @@
#include <linux/regulator/consumer.h>
#include <linux/pm_runtime.h>
#include <linux/of.h>
-
+#include <linux/bug.h>
#include <linux/leds.h>
#include <linux/mmc/mmc.h>
@@ -186,13 +186,14 @@ static void sdhci_disable_card_detection(struct sdhci_host *host)
sdhci_set_card_detection(host, false);
}
-static void sdhci_runtime_pm_bus_on(struct sdhci_host *host)
+void sdhci_runtime_pm_bus_on(struct sdhci_host *host)
{
if (host->bus_on)
return;
host->bus_on = true;
pm_runtime_get_noresume(mmc_dev(host->mmc));
}
+EXPORT_SYMBOL_GPL(sdhci_runtime_pm_bus_on);
void sdhci_runtime_pm_bus_off(struct sdhci_host *host)
{
@@ -2036,41 +2037,48 @@ static void sdhci_set_power_reg(struct sdhci_host *host, unsigned char mode,
sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
}
+unsigned short sdhci_get_vdd_value(unsigned short vdd)
+{
+ u8 pwr;
+
+ switch (1 << vdd) {
+ case MMC_VDD_165_195:
+ /*
+ * Without a regulator, SDHCI does not support 2.0v
+ * so we only get here if the driver deliberately
+ * added the 2.0v range to ocr_avail. Map it to 1.8v
+ * for the purpose of turning on the power.
+ */
+ case MMC_VDD_20_21:
+ pwr = SDHCI_POWER_180;
+ break;
+ case MMC_VDD_29_30:
+ case MMC_VDD_30_31:
+ pwr = SDHCI_POWER_300;
+ break;
+ case MMC_VDD_32_33:
+ case MMC_VDD_33_34:
+ pwr = SDHCI_POWER_330;
+ break;
+ default:
+ pwr = 0;
+ break;
+ }
+
+ return pwr;
+}
+EXPORT_SYMBOL_GPL(sdhci_get_vdd_value);
+
void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
unsigned short vdd)
{
u8 pwr = 0;
if (mode != MMC_POWER_OFF) {
- switch (1 << vdd) {
- case MMC_VDD_165_195:
- /*
- * Without a regulator, SDHCI does not support 2.0v
- * so we only get here if the driver deliberately
- * added the 2.0v range to ocr_avail. Map it to 1.8v
- * for the purpose of turning on the power.
- */
- case MMC_VDD_20_21:
- pwr = SDHCI_POWER_180;
- break;
- case MMC_VDD_29_30:
- case MMC_VDD_30_31:
- pwr = SDHCI_POWER_300;
- break;
- case MMC_VDD_32_33:
- case MMC_VDD_33_34:
- /*
- * 3.4 ~ 3.6V are valid only for those platforms where it's
- * known that the voltage range is supported by hardware.
- */
- case MMC_VDD_34_35:
- case MMC_VDD_35_36:
- pwr = SDHCI_POWER_330;
- break;
- default:
+ pwr = sdhci_get_vdd_value(vdd);
+ if (!pwr) {
WARN(1, "%s: Invalid vdd %#x\n",
mmc_hostname(host->mmc), vdd);
- break;
}
}
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 3787ffe61c78..0d34ff4dca4e 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -852,6 +852,7 @@ static inline void sdhci_read_caps(struct sdhci_host *host)
__sdhci_read_caps(host, NULL, NULL, NULL);
}
+void sdhci_runtime_pm_bus_on(struct sdhci_host *host);
void sdhci_runtime_pm_bus_off(struct sdhci_host *host);
u16 sdhci_calc_clk(struct sdhci_host *host, unsigned int clock,
unsigned int *actual_clock);
@@ -862,6 +863,7 @@ void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
void sdhci_set_power_and_bus_voltage(struct sdhci_host *host,
unsigned char mode,
unsigned short vdd);
+unsigned short sdhci_get_vdd_value(unsigned short vdd);
void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
unsigned short vdd);
int sdhci_get_cd_nogpio(struct mmc_host *mmc);
--
2.25.1
Powered by blists - more mailing lists