[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20221005-mdm9615-pinctrl-yaml-v2-3-639fe67a04be@linaro.org>
Date: Mon, 17 Oct 2022 12:23:07 +0200
From: Neil Armstrong <neil.armstrong@...aro.org>
To: Lee Jones <lee@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Konrad Dybcio <konrad.dybcio@...ainline.org>,
Andy Gross <agross@...nel.org>,
Mark Brown <broonie@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>,
Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Bjorn Andersson <andersson@...nel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-gpio@...r.kernel.org,
Neil Armstrong <neil.armstrong@...aro.org>,
devicetree@...r.kernel.org
Subject: [PATCH v2 3/5] arm: dts: qcom: mdm9615: wp8548-mangoh-green: fix sx150xq
node names and probe-reset property
Fix the sx150xq node names to pinctrl and use the right probe-reset property.
Reviewed-by: Konrad Dybcio <konrad.dybcio@...ainline.org>
Signed-off-by: Neil Armstrong <neil.armstrong@...aro.org>
---
arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
index 30a110984597..a8304769b509 100644
--- a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
+++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
@@ -116,7 +116,7 @@ i2c@4 {
#size-cells = <0>;
reg = <4>;
- gpioext0: gpio@3e {
+ gpioext0: pinctrl@3e {
/* GPIO Expander 0 Mapping :
* - 0: ARDUINO_RESET_Level shift
* - 1: BattChrgr_PG_N
@@ -142,7 +142,7 @@ gpioext0: gpio@3e {
interrupt-parent = <&gpioext1>;
interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
- probe-reset;
+ semtech,probe-reset;
gpio-controller;
interrupt-controller;
@@ -154,7 +154,7 @@ i2c@5 {
#size-cells = <0>;
reg = <5>;
- gpioext1: gpio@3f {
+ gpioext1: pinctrl@3f {
/* GPIO Expander 1 Mapping :
* - 0: GPIOEXP_INT1
* - 1: Battery detect
@@ -183,7 +183,7 @@ gpioext1: gpio@3f {
interrupt-parent = <&msmgpio>;
interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
- probe-reset;
+ semtech,probe-reset;
gpio-controller;
interrupt-controller;
@@ -195,7 +195,7 @@ i2c@6 {
#size-cells = <0>;
reg = <6>;
- gpioext2: gpio@70 {
+ gpioext2: pinctrl@70 {
/* GPIO Expander 2 Mapping :
* - 0: USB_HUB_INTn
* - 1: HUB_CONNECT
@@ -221,7 +221,7 @@ gpioext2: gpio@70 {
interrupt-parent = <&gpioext1>;
interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
- probe-reset;
+ semtech,probe-reset;
gpio-controller;
interrupt-controller;
--
b4 0.10.1
Powered by blists - more mailing lists