| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <SN6PR2101MB16937E0058C9452AF3EC4B4ED7299@SN6PR2101MB1693.namprd21.prod.outlook.com>
Date: Mon, 17 Oct 2022 15:53:31 +0000
From: "Michael Kelley (LINUX)" <mikelley@...rosoft.com>
To: Shradha Gupta <shradhagupta@...ux.microsoft.com>,
Andrew Morton <akpm@...ux-foundation.org>,
"linux-mm@...ck.org" <linux-mm@...ck.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-hyperv@...r.kernel.org" <linux-hyperv@...r.kernel.org>
CC: KY Srinivasan <kys@...rosoft.com>,
Haiyang Zhang <haiyangz@...rosoft.com>,
Stephen Hemminger <sthemmin@...rosoft.com>,
Wei Liu <wei.liu@...nel.org>, Dexuan Cui <decui@...rosoft.com>
Subject: RE: [PATCH v2 2/2] hv_balloon: Add support for configurable order
free page reporting
From: Shradha Gupta <shradhagupta@...ux.microsoft.com> Sent: Thursday, September 29, 2022 11:02 PM
>
> Newer versions of Hyper-V allow reporting unused guest pages in chunks
> smaller than 2 Mbytes. Using smaller chunks allows reporting more
> unused guest pages, but with increased overhead in the finding the
> small chunks. To make this tradeoff configurable, use the existing
> page_reporting_order module parameter to control the reporting order.
> Drop and refine checks that restricted the minimun page reporting order
> to 2Mbytes size pages. Add appropriate checks to make sure the
> underlying Hyper-V versions support cold discard hints of any order
> (and not just starting from 9)
>
> Signed-off-by: Shradha Gupta <shradhagupta@...ux.microsoft.com>
> ---
> drivers/hv/hv_balloon.c | 94 ++++++++++++++++++++++++++++++++---------
> 1 file changed, 73 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/hv/hv_balloon.c b/drivers/hv/hv_balloon.c
> index fdf6decacf06..7088ed056e50 100644
> --- a/drivers/hv/hv_balloon.c
> +++ b/drivers/hv/hv_balloon.c
> @@ -469,12 +469,16 @@ static bool do_hot_add;
> * the specified number of seconds.
> */
> static uint pressure_report_delay = 45;
> +extern unsigned int page_reporting_order;
> +#define HV_MAX_FAILURES 2
>
> /*
> * The last time we posted a pressure report to host.
> */
> static unsigned long last_post_time;
>
> +static int hv_hypercall_multi_failure;
> +
> module_param(hot_add, bool, (S_IRUGO | S_IWUSR));
> MODULE_PARM_DESC(hot_add, "If set attempt memory hot_add");
>
> @@ -579,6 +583,10 @@ static struct hv_dynmem_device dm_device;
>
> static void post_status(struct hv_dynmem_device *dm);
>
> +static void enable_page_reporting(void);
> +
> +static void disable_page_reporting(void);
> +
> #ifdef CONFIG_MEMORY_HOTPLUG
> static inline bool has_pfn_is_backed(struct hv_hotadd_state *has,
> unsigned long pfn)
> @@ -1418,6 +1426,18 @@ static int dm_thread_func(void *dm_dev)
> */
> reinit_completion(&dm_device.config_event);
> post_status(dm);
> + /*
> + * disable free page reporting if multiple hypercall
> + * failure flag set. It is not done in the page_reporting
> + * callback context as that causes a deadlock between
> + * page_reporting_process() and page_reporting_unregister()
> + */
> + if (hv_hypercall_multi_failure >= HV_MAX_FAILURES) {
> + pr_err("Multiple failures in cold memory discard hypercall, disabling page reporting\n");
> + disable_page_reporting();
> + /* Reset the flag after disabling reporting */
> + hv_hypercall_multi_failure = 0;
> + }
> }
>
> return 0;
> @@ -1593,20 +1613,20 @@ static void balloon_onchannelcallback(void *context)
>
> }
>
> -/* Hyper-V only supports reporting 2MB pages or higher */
> -#define HV_MIN_PAGE_REPORTING_ORDER 9
> -#define HV_MIN_PAGE_REPORTING_LEN (HV_HYP_PAGE_SIZE <<
> HV_MIN_PAGE_REPORTING_ORDER)
> +#define HV_LARGE_REPORTING_ORDER 9
> +#define HV_LARGE_REPORTING_LEN (HV_HYP_PAGE_SIZE << \
> + HV_LARGE_REPORTING_ORDER)
> static int hv_free_page_report(struct page_reporting_dev_info *pr_dev_info,
> struct scatterlist *sgl, unsigned int nents)
> {
> unsigned long flags;
> struct hv_memory_hint *hint;
> - int i;
> + int i, order;
> u64 status;
> struct scatterlist *sg;
>
> WARN_ON_ONCE(nents > HV_MEMORY_HINT_MAX_GPA_PAGE_RANGES);
> - WARN_ON_ONCE(sgl->length < HV_MIN_PAGE_REPORTING_LEN);
> + WARN_ON_ONCE(sgl->length < (HV_HYP_PAGE_SIZE << page_reporting_order));
> local_irq_save(flags);
> hint = *(struct hv_memory_hint **)this_cpu_ptr(hyperv_pcpu_input_arg);
> if (!hint) {
> @@ -1621,21 +1641,53 @@ static int hv_free_page_report(struct page_reporting_dev_info *pr_dev_info,
>
> range = &hint->ranges[i];
> range->address_space = 0;
> - /* page reporting only reports 2MB pages or higher */
> - range->page.largepage = 1;
> - range->page.additional_pages =
> - (sg->length / HV_MIN_PAGE_REPORTING_LEN) - 1;
> - range->page_size = HV_GPA_PAGE_RANGE_PAGE_SIZE_2MB;
> - range->base_large_pfn =
> - page_to_hvpfn(sg_page(sg)) >> HV_MIN_PAGE_REPORTING_ORDER;
> + order = get_order(sg->length);
> + /*
> + * Hyper-V expects the additional_pages field in the units
> + * of one of these 3 sizes, 4Kbytes, 2Mbytes or 1Gbytes.
> + * This is dictated by the values of the fields page.largesize
> + * and page_size.
> + * This code however, only uses 4Kbytes and 2Mbytes units
> + * and not 1Gbytes unit.
> + */
> +
> + /* page reporting for pages 2MB or higher */
> + if (order >= HV_LARGE_REPORTING_ORDER ) {
> + range->page.largepage = 1;
> + range->page_size = HV_GPA_PAGE_RANGE_PAGE_SIZE_2MB;
> + range->base_large_pfn = page_to_hvpfn(
> + sg_page(sg)) >> HV_LARGE_REPORTING_ORDER;
> + range->page.additional_pages =
> + (sg->length / HV_LARGE_REPORTING_LEN) - 1;
> + } else {
> + /* Page reporting for pages below 2MB */
> + range->page.basepfn = page_to_hvpfn(sg_page(sg));
> + range->page.largepage = false;
> + range->page.additional_pages =
> + (sg->length / HV_HYP_PAGE_SIZE) - 1;
> + }
> +
> }
>
> status = hv_do_rep_hypercall(HV_EXT_CALL_MEMORY_HEAT_HINT, nents, 0,
> hint, NULL);
> local_irq_restore(flags);
> - if ((status & HV_HYPERCALL_RESULT_MASK) != HV_STATUS_SUCCESS) {
> + if (!hv_result_success(status)) {
> +
> pr_err("Cold memory discard hypercall failed with status %llx\n",
> - status);
> + status);
> + if (hv_hypercall_multi_failure > 0)
> + hv_hypercall_multi_failure++;
> +
> + if (hv_result(status) == HV_STATUS_INVALID_PARAMETER) {
> + pr_err("Underlying Hyper-V does not support order less than 9. Hypercall failed\n");
> + pr_err("Defaulting to page_reporting_order %d\n",
> + pageblock_order);
> + page_reporting_order = pageblock_order;
> + hv_hypercall_multi_failure++;
> + return -EINVAL;
> + }
> +
> return -EINVAL;
> }
>
> @@ -1646,12 +1698,6 @@ static void enable_page_reporting(void)
> {
> int ret;
>
> - /* Essentially, validating 'PAGE_REPORTING_MIN_ORDER' is big enough. */
> - if (pageblock_order < HV_MIN_PAGE_REPORTING_ORDER) {
> - pr_debug("Cold memory discard is only supported on 2MB pages and above\n");
> - return;
> - }
> -
> if (!hv_query_ext_cap(HV_EXT_CAPABILITY_MEMORY_COLD_DISCARD_HINT)) {
> pr_debug("Cold memory discard hint not supported by Hyper-V\n");
> return;
> @@ -1659,12 +1705,18 @@ static void enable_page_reporting(void)
>
> BUILD_BUG_ON(PAGE_REPORTING_CAPACITY > HV_MEMORY_HINT_MAX_GPA_PAGE_RANGES);
> dm_device.pr_dev_info.report = hv_free_page_report;
> + /*
> + * We let the page_reporting_order parameter decide the order
> + * in the page_reporting code
> + */
> + dm_device.pr_dev_info.order = 0;
> ret = page_reporting_register(&dm_device.pr_dev_info);
> if (ret < 0) {
> dm_device.pr_dev_info.report = NULL;
> pr_err("Failed to enable cold memory discard: %d\n", ret);
> } else {
> - pr_info("Cold memory discard hint enabled\n");
> + pr_info("Cold memory discard hint enabled with order %d\n",
> + page_reporting_order);
> }
> }
>
> --
> 2.37.2
Reviewed-by: Michael Kelley <mikelley@...rosoft.com>
Powered by blists - more mailing lists