linux-kernel - Re: [PATCH 1/5] mmc: sdhci-of-arasan: Fix SDHCI_RESET

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <e7816e4a-8558-0de0-e25f-d10abd0ef1c3@intel.com>
Date:   Tue, 18 Oct 2022 19:13:28 +0300
From:   Adrian Hunter <adrian.hunter@...el.com>
To:     Brian Norris <briannorris@...omium.org>,
        Ulf Hansson <ulf.hansson@...aro.org>
Cc:     Shawn Lin <shawn.lin@...k-chips.com>,
        Shawn Guo <shawnguo@...nel.org>,
        Fabio Estevam <festevam@...il.com>,
        Faiz Abbas <faiz_abbas@...com>,
        NXP Linux Team <linux-imx@....com>,
        Haibo Chen <haibo.chen@....com>,
        Al Cooper <alcooperx@...il.com>, linux-mmc@...r.kernel.org,
        Pengutronix Kernel Team <kernel@...gutronix.de>,
        linux-kernel@...r.kernel.org,
        Florian Fainelli <f.fainelli@...il.com>,
        Sascha Hauer <s.hauer@...gutronix.de>,
        Thierry Reding <thierry.reding@...il.com>,
        Michal Simek <michal.simek@...inx.com>,
        Jonathan Hunter <jonathanh@...dia.com>,
        Sowjanya Komatineni <skomatineni@...dia.com>,
        linux-arm-kernel@...ts.infradead.org,
        Broadcom internal kernel review list 
        <bcm-kernel-feedback-list@...adcom.com>, stable@...r.kernel.org
Subject: Re: [PATCH 1/5] mmc: sdhci-of-arasan: Fix SDHCI_RESET_ALL for CQHCI

On 18/10/22 06:57, Brian Norris wrote:
> SDHCI_RESET_ALL resets will reset the hardware CQE state, but we aren't
> tracking that properly in software. When out of sync, we may trigger
> various timeouts.
> 
> It's not typical to perform resets while CQE is enabled, but one
> particular case I hit commonly enough: mmc_suspend() -> mmc_power_off().
> Typically we will eventually deactivate CQE (cqhci_suspend() ->
> cqhci_deactivate()), but that's not guaranteed -- in particular, if
> we perform a partial (e.g., interrupted) system suspend.
> 
> The same bug was already found and fixed for two other drivers, in v5.7
> and v5.9:
> 
> 5cf583f1fb9c mmc: sdhci-msm: Deactivate CQE during SDHC reset
> df57d73276b8 mmc: sdhci-pci: Fix SDHCI_RESET_ALL for CQHCI for Intel GLK-based controllers
> 
> The latter is especially prescient, saying "other drivers using CQHCI
> might benefit from a similar change, if they also have CQHCI reset by
> SDHCI_RESET_ALL."
> 
> So like these other patches, deactivate CQHCI when resetting the
> controller. Also, move around the DT/caps handling, because
> sdhci_setup_host() performs resets before we've initialized CQHCI. This
> is the pattern followed in other SDHCI/CQHCI drivers.

Did you consider just checking host->mmc->cqe_private like
sdhci_cqhci_reset() ?

> 
> Fixes: 84362d79f436 ("mmc: sdhci-of-arasan: Add CQHCI support for arasan,sdhci-5.1")
> Cc: <stable@...r.kernel.org>
> Signed-off-by: Brian Norris <briannorris@...omium.org>
> ---
> 
>  drivers/mmc/host/sdhci-of-arasan.c | 17 +++++++++++------
>  1 file changed, 11 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
> index 3997cad1f793..1988a703781a 100644
> --- a/drivers/mmc/host/sdhci-of-arasan.c
> +++ b/drivers/mmc/host/sdhci-of-arasan.c
> @@ -366,6 +366,10 @@ static void sdhci_arasan_reset(struct sdhci_host *host, u8 mask)
>  	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>  	struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host);
>  
> +	if ((host->mmc->caps2 & MMC_CAP2_CQE) && (mask & SDHCI_RESET_ALL) &&
> +	    sdhci_arasan->has_cqe)
> +		cqhci_deactivate(host->mmc);
> +
>  	sdhci_reset(host, mask);
>  
>  	if (sdhci_arasan->quirks & SDHCI_ARASAN_QUIRK_FORCE_CDTEST) {
> @@ -1521,7 +1525,8 @@ static int sdhci_arasan_register_sdclk(struct sdhci_arasan_data *sdhci_arasan,
>  	return 0;
>  }
>  
> -static int sdhci_arasan_add_host(struct sdhci_arasan_data *sdhci_arasan)
> +static int sdhci_arasan_add_host(struct sdhci_arasan_data *sdhci_arasan,
> +				 struct device_node *np)
>  {
>  	struct sdhci_host *host = sdhci_arasan->host;
>  	struct cqhci_host *cq_host;
> @@ -1549,6 +1554,10 @@ static int sdhci_arasan_add_host(struct sdhci_arasan_data *sdhci_arasan)
>  	if (dma64)
>  		cq_host->caps |= CQHCI_TASK_DESC_SZ_128;
>  
> +	host->mmc->caps2 |= MMC_CAP2_CQE;
> +	if (!of_property_read_bool(np, "disable-cqe-dcmd"))
> +		host->mmc->caps2 |= MMC_CAP2_CQE_DCMD;
> +
>  	ret = cqhci_init(cq_host, host->mmc, dma64);
>  	if (ret)
>  		goto cleanup;
> @@ -1705,13 +1714,9 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
>  		host->mmc_host_ops.start_signal_voltage_switch =
>  					sdhci_arasan_voltage_switch;
>  		sdhci_arasan->has_cqe = true;
> -		host->mmc->caps2 |= MMC_CAP2_CQE;
> -
> -		if (!of_property_read_bool(np, "disable-cqe-dcmd"))
> -			host->mmc->caps2 |= MMC_CAP2_CQE_DCMD;
>  	}
>  
> -	ret = sdhci_arasan_add_host(sdhci_arasan);
> +	ret = sdhci_arasan_add_host(sdhci_arasan, np);
>  	if (ret)
>  		goto err_add_host;
>