linux-kernel - [PATCH 6.0 090/862] serial: cpm_uart: Dont request IRQ too early for console port

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20221019083253.923565134@linuxfoundation.org>
Date:   Wed, 19 Oct 2022 10:22:57 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org,
        Christophe Leroy <christophe.leroy@...roup.eu>
Subject: [PATCH 6.0 090/862] serial: cpm_uart: Dont request IRQ too early for console port

From: Christophe Leroy <christophe.leroy@...roup.eu>

commit 30963b2f75bfdbbcf1cc5d80bf88fec7aaba808d upstream.

The following message is seen during boot and the activation of
console port gets delayed until normal serial ports activation.

[    0.001346] irq: no irq domain found for pic@930 !

The console port doesn't need irq, perform irq reservation later,
during cpm_uart probe.

While at it, don't use NO_IRQ but 0 which is the value returned
by irq_of_parse_and_map() in case of error. By chance powerpc's
NO_IRQ has value 0 but on some architectures it is -1.

Fixes: 14d893fc6846 ("powerpc/8xx: Convert CPM1 interrupt controller to platform_device")
Cc: stable@...r.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@...roup.eu>
Link: https://lore.kernel.org/r/8bed0f30c2e9ef16ae64fb1243a16d54a48eb8da.1664526717.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
 drivers/tty/serial/cpm_uart/cpm_uart_core.c |   22 ++++++++++------------
 1 file changed, 10 insertions(+), 12 deletions(-)

--- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
@@ -1214,12 +1214,6 @@ static int cpm_uart_init_port(struct dev
 	pinfo->port.fifosize = pinfo->tx_nrfifos * pinfo->tx_fifosize;
 	spin_lock_init(&pinfo->port.lock);
 
-	pinfo->port.irq = irq_of_parse_and_map(np, 0);
-	if (pinfo->port.irq == NO_IRQ) {
-		ret = -EINVAL;
-		goto out_pram;
-	}
-
 	for (i = 0; i < NUM_GPIOS; i++) {
 		struct gpio_desc *gpiod;
 
@@ -1229,7 +1223,7 @@ static int cpm_uart_init_port(struct dev
 
 		if (IS_ERR(gpiod)) {
 			ret = PTR_ERR(gpiod);
-			goto out_irq;
+			goto out_pram;
 		}
 
 		if (gpiod) {
@@ -1255,8 +1249,6 @@ static int cpm_uart_init_port(struct dev
 
 	return cpm_uart_request_port(&pinfo->port);
 
-out_irq:
-	irq_dispose_mapping(pinfo->port.irq);
 out_pram:
 	cpm_uart_unmap_pram(pinfo, pram);
 out_mem:
@@ -1436,11 +1428,17 @@ static int cpm_uart_probe(struct platfor
 	/* initialize the device pointer for the port */
 	pinfo->port.dev = &ofdev->dev;
 
+	pinfo->port.irq = irq_of_parse_and_map(ofdev->dev.of_node, 0);
+	if (!pinfo->port.irq)
+		return -EINVAL;
+
 	ret = cpm_uart_init_port(ofdev->dev.of_node, pinfo);
-	if (ret)
-		return ret;
+	if (!ret)
+		return uart_add_one_port(&cpm_reg, &pinfo->port);
+
+	irq_dispose_mapping(pinfo->port.irq);
 
-	return uart_add_one_port(&cpm_reg, &pinfo->port);
+	return ret;
 }
 
 static int cpm_uart_remove(struct platform_device *ofdev)