| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAPDyKFonqFO3ckMv9imjvsMPYYX5r7N5uhSdDq5rUbw6woFh5g@mail.gmail.com>
Date: Wed, 19 Oct 2022 13:29:35 +0200
From: Ulf Hansson <ulf.hansson@...aro.org>
To: Victor Shih <victorshihgli@...il.com>
Cc: adrian.hunter@...el.com, linux-mmc@...r.kernel.org,
linux-kernel@...r.kernel.org, benchuanggli@...il.com,
HL.Liu@...esyslogic.com.tw, Greg.tu@...esyslogic.com.tw,
takahiro.akashi@...aro.org, dlunev@...omium.org,
Victor Shih <victor.shih@...esyslogic.com.tw>
Subject: Re: [PATCH V5 00/26] Add support UHS-II for GL9755
On Wed, 19 Oct 2022 at 13:06, Victor Shih <victorshihgli@...il.com> wrote:
>
> Summary
> =======
> These patches[1] support UHS-II and fix GL9755 UHS-II compatibility.
>
> About UHS-II, roughly deal with the following three parts:
> 1) A UHS-II detection and initialization:
> - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence
> [2]).
> - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]).
> - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section
> 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register
> Setup Sequence.
>
> 2) Send Legacy SD command through SD-TRAN
> - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD
> compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet
> Types and Format Overview[3]).
> - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II
> CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]).
>
> 3) UHS-II Interrupt
> - Except for UHS-II error interrupts, most interrupts share the original
> interrupt registers.
>
> Patch structure
> ===============
> patch#1-#6: for core
> patch#7-#25: for sdhci
> patch#26: for GL9755
>
> Changes in v5 (Oct. 19, 2022)
> * rebased to the linux-kernel-v6.1-rc1 in Ulf Hansson next branch.
Thanks for rebasing!
Although, future wise, if you make any kind of changes to any patch in
the series, please bump the version and explain what has been changed.
This avoids confusion.
I need some more time to have a closer look at the series, so I will
get back to you again.
Kind regards
Uffe
> * according to the guidance and overall architecture provided
> by Ulf Hansson, Ben Chuang and Jason Lai to implement the
> UHS-2 Core function based on the patches of the [V4,0/6]
> Preparations to support SD UHS-II cards[5].
> * according to the guidance and comments provided by
> Adrian Hunter, Ben Chuang and AKASHI Takahiro to implement
> the UHS-2 Host function based on the patches of the
> [RFC,v3.1,00/27] Add support UHS-II for GL9755[4].
> * implement the necessary function to let the UHS-2 Core/Host
> work properly.
> * fix most of checkpatch warnings/errors
>
> Reference
> =========
> [1] https://gitlab.com/ben.chuang/linux-uhs2-gl9755.git
> [2] SD Host Controller Simplified Specification 4.20
> [3] UHS-II Simplified Addendum 1.02
> [4] https://patchwork.kernel.org/project/linux-mmc/cover/20201106022726.19831-1-takahiro.akashi@linaro.org/
> [5] https://patchwork.kernel.org/project/linux-mmc/cover/20220418115833.10738-1-jasonlai.genesyslogic@gmail.com/
>
> ----------------- original cover letter from v3.1 -----------------
> This is an interim snapshot of our next version, v4, for enabling
> UHS-II on MMC/SD.
>
> It is focused on 'sdhci' side to address Adrian's comments regarding
> "modularising" sdhci-uhs2.c.
> The whole aim of this version is to get early feedback from Adrian (and
> others) on this issue. Without any consensus about the code structure,
> it would make little sense to go further ahead on sdhci side.
> (Actually, Adrian has made no comments other than "modularising" so far.)
>
> I heavily reworked/refactored sdhci-uhs2.c and re-organised the patch
> set to meet what I believe Adrian expects; no UHS-II related code in
> Legacy (UHS-I) code or sdhci.c.
>
> Nevertheless, almost of all changes I made are trivial and straightforward
> in this direction, and I believe that there is no logic changed since v3
> except sdhci_uhs2_irq(), as ops->irq hook, where we must deal with UHS-II
> command sequences in addition to UHS-II errors. So I added extra handlings.
>
> I admit that there is plenty of room for improvements (for example,
> handling host->flags), but again the focal point here is how sdhci-uhs2.c
> should be built as a module.
>
> Please review this series (particularly Patch#8-#26 and #27) from this
> viewpoint in the first place.
> (Ben is working on 'host' side but there is no change on 'host' side
> in this submission except a minor tweak.)
>
> Thanks,
> -Takahiro Akashi
>
> ------ original cover letter from v3 ------
> Summary
> =======
> These patches[1] support UHS-II and fix GL9755 UHS-II compatibility.
>
> About UHS-II, roughly deal with the following three parts:
> 1) A UHS-II detection and initialization:
> - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence
> [2]).
> - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]).
> - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section
> 3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register
> Setup Sequence.
>
> 2) Send Legacy SD command through SD-TRAN
> - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD
> compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet
> Types and Format Overview[3]).
> - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II
> CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]).
>
> 3) UHS-II Interrupt
> - Except for UHS-II error interrupts, most interrupts share the original
> interrupt registers.
>
> Patch structure
> ===============
> patch#1-#7: for core
> patch#8-#17: for sdhci
> patch#18-#21: for GL9755
>
> Tests
> =====
> Ran 'dd' command to evaluate the performance:
> (SanDisk UHS-II card on GL9755 controller)
> Read Write
> UHS-II disabled (UHS-I): 88.3MB/s 60.7MB/s
> UHS-II enabled : 206MB/s 80MB/s
>
> TODO
> ====
> - replace some define with BIT macro
>
> Reference
> =========
> [1] https://gitlab.com/ben.chuang/linux-uhs2-gl9755.git
> [2] SD Host Controller Simplified Specification 4.20
> [3] UHS-II Simplified Addendum 1.02
>
> Changes in v3 (Jul. 10, 2020)
> * rebased to v5.8-rc4
> * add copyright notice
> * reorganize the patch set and split some commits into smaller ones
> * separate uhs-2 headers from others
> * correct wrong spellings
> * fix most of checkpatch warnings/errors
> * remove all k[cz]alloc() from the code
> * guard sdhci-uhs2 specific code with
> 'if (IS_ENABLED(CONFIG_MMC_SDHCI_UHS2))'
> * make sdhci-uhs2.c as a module
> * trivial changes, including
> - rename back sdhci-core.c to sdhci.c
> - allow vendor code to disable uhs2 if v4_mode == 0
> in __sdhci_add_host()
> - merge uhs2_power_up() into mmc_power_up()
> - remove flag_uhs2 from mmc_attach_sd()
> - add function descriptions to EXPORT'ed functions
> - other minor code optimization
>
> Changes in v2 (Jan. 9, 2020)
> * rebased to v5.5-rc5
>
> AKASHI Takahiro (5):
> mmc: sdhci: add a kernel configuration for enabling UHS-II support
> mmc: sdhci: add UHS-II module
> mmc: sdhci-uhs2: dump UHS-II registers
> mmc: sdhci-uhs2: add set_timeout()
> mmc: sdhci-pci: add UHS-II support framework
>
> Ben Chuang (1):
> mmc: sdhci-uhs2: add post-mmc_attach_sd hook
>
> Ulf Hansson (4):
> mmc: core: Cleanup printing of speed mode at card insertion
> mmc: core: Prepare to support SD UHS-II cards
> mmc: core: Announce successful insertion of an SD UHS-II card
> mmc: core: Extend support for mmc regulators with a vqmmc2
>
> Victor Shih (16):
> mmc: core: Add definitions for SD UHS-II cards
> mmc: core: Support UHS-II card control and access
> mmc: sdhci: add UHS-II related definitions in headers
> mmc: sdhci-uhs2: add reset function and uhs2_mode function
> mmc: sdhci-uhs2: add set_power() to support vdd2
> mmc: sdhci-uhs2: skip signal_voltage_switch()
> mmc: sdhci-uhs2: add set_ios()
> mmc: sdhci-uhs2: add detect_init() to detect the interface
> mmc: sdhci-uhs2: add clock operations
> mmc: sdhci-uhs2: add uhs2_control() to initialise the interface
> mmc: sdhci-uhs2: add request() and others
> mmc: sdhci-uhs2: add irq() and others
> mmc: sdhci-uhs2: add add_host() and others to set up the driver
> mmc: sdhci-uhs2: add pre-detect_init hook
> mmc: core: add post-mmc_attach_sd hook
> mmc: sdhci-pci-gli: enable UHS-II mode for GL9755
>
> drivers/mmc/core/Makefile | 2 +-
> drivers/mmc/core/block.c | 6 +-
> drivers/mmc/core/bus.c | 38 +-
> drivers/mmc/core/core.c | 49 +-
> drivers/mmc/core/core.h | 1 +
> drivers/mmc/core/host.h | 4 +
> drivers/mmc/core/mmc_ops.c | 25 +-
> drivers/mmc/core/mmc_ops.h | 1 +
> drivers/mmc/core/regulator.c | 34 +
> drivers/mmc/core/sd.c | 16 +-
> drivers/mmc/core/sd.h | 3 +
> drivers/mmc/core/sd_ops.c | 18 +
> drivers/mmc/core/sd_ops.h | 3 +
> drivers/mmc/core/sd_uhs2.c | 1394 +++++++++++++++++++++++++
> drivers/mmc/host/Kconfig | 10 +
> drivers/mmc/host/Makefile | 1 +
> drivers/mmc/host/sdhci-pci-core.c | 17 +-
> drivers/mmc/host/sdhci-pci-gli.c | 310 +++++-
> drivers/mmc/host/sdhci-pci.h | 3 +
> drivers/mmc/host/sdhci-uhs2.c | 1606 +++++++++++++++++++++++++++++
> drivers/mmc/host/sdhci-uhs2.h | 226 ++++
> drivers/mmc/host/sdhci.c | 342 +++---
> drivers/mmc/host/sdhci.h | 125 ++-
> include/linux/mmc/card.h | 47 +
> include/linux/mmc/core.h | 13 +
> include/linux/mmc/host.h | 99 ++
> include/linux/mmc/sd_uhs2.h | 263 +++++
> 27 files changed, 4486 insertions(+), 170 deletions(-)
> create mode 100644 drivers/mmc/core/sd_uhs2.c
> create mode 100644 drivers/mmc/host/sdhci-uhs2.c
> create mode 100644 drivers/mmc/host/sdhci-uhs2.h
> create mode 100644 include/linux/mmc/sd_uhs2.h
>
> --
> 2.25.1
>
Powered by blists - more mailing lists