linux-kernel - Re: [PATCH 2/2] PCI: qcom: Add basic interconnect support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <Y1AKiTkLa23idaf2@x1>
Date:   Wed, 19 Oct 2022 10:32:41 -0400
From:   Brian Masney <bmasney@...hat.com>
To:     Johan Hovold <johan+linaro@...nel.org>
Cc:     Stanimir Varbanov <svarbanov@...sol.com>,
        Lorenzo Pieralisi <lpieralisi@...nel.org>,
        Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konrad.dybcio@...ainline.org>,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Krzysztof Wilczyński <kw@...ux.com>,
        Manivannan Sadhasivam <mani@...nel.org>,
        Krishna chaitanya chundru <quic_krichai@...cinc.com>,
        quic_vbadigan@...cinc.com, linux-arm-msm@...r.kernel.org,
        linux-pci@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/2] PCI: qcom: Add basic interconnect support

On Mon, Oct 17, 2022 at 01:24:49PM +0200, Johan Hovold wrote:
> +	/*
> +	 * Some Qualcomm platforms require interconnect bandwidth constraints
> +	 * to be set before enabling interconnect clocks.
> +	 *
> +	 * Set an initial peak bandwidth corresponding to single-lane Gen 1
> +	 * for the pcie-mem path.
> +	 */
> +	ret = icc_set_bw(pcie->icc_mem, 0, MBps_to_icc(250));

[snip]

> +	speed = FIELD_GET(PCI_EXP_LNKSTA_CLS, status);
> +	width = FIELD_GET(PCI_EXP_LNKSTA_NLW, status);
> +
> +	switch (speed) {
> +	case 1:
> +		bw = MBps_to_icc(250);
> +		break;
> +	case 2:
> +		bw = MBps_to_icc(500);
> +		break;
> +	default:
> +	case 3:
> +		bw = MBps_to_icc(985);
> +		break;
> +	}

Just curious: These platforms have a 4 lane PCIe bus. Why use 985
instead of 1000 for the maximum?

Brian