| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221019152947.3857217-14-arnd@kernel.org>
Date: Wed, 19 Oct 2022 17:29:39 +0200
From: Arnd Bergmann <arnd@...nel.org>
To: Sekhar Nori <nsekhar@...com>, Bartosz Golaszewski <brgl@...ev.pl>,
linux-arm-kernel@...ts.infradead.org,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
"Lad, Prabhakar" <prabhakar.csengg@...il.com>
Cc: linux-kernel@...r.kernel.org, Kevin Hilman <khilman@...libre.com>,
Arnd Bergmann <arnd@...db.de>, linux-media@...r.kernel.org,
linux-staging@...ts.linux.dev
Subject: [PATCH 13/14] staging: media: remove davinci vpfe_capture driver
From: Arnd Bergmann <arnd@...db.de>
This driver was for the davinci dm644x and dm3xx platforms that are
now removed from the kernel, so there are no more users.
Signed-off-by: Arnd Bergmann <arnd@...db.de>
---
MAINTAINERS | 1 -
drivers/staging/media/Kconfig | 1 -
drivers/staging/media/Makefile | 1 -
.../media/deprecated/vpfe_capture/Kconfig | 58 -
.../media/deprecated/vpfe_capture/Makefile | 4 -
.../media/deprecated/vpfe_capture/TODO | 7 -
.../deprecated/vpfe_capture/ccdc_hw_device.h | 80 -
.../deprecated/vpfe_capture/dm355_ccdc.c | 934 --------
.../deprecated/vpfe_capture/dm355_ccdc.h | 308 ---
.../deprecated/vpfe_capture/dm355_ccdc_regs.h | 297 ---
.../deprecated/vpfe_capture/dm644x_ccdc.c | 879 --------
.../deprecated/vpfe_capture/dm644x_ccdc.h | 171 --
.../vpfe_capture/dm644x_ccdc_regs.h | 140 --
.../media/deprecated/vpfe_capture/isif.c | 1127 ----------
.../media/deprecated/vpfe_capture/isif.h | 518 -----
.../media/deprecated/vpfe_capture/isif_regs.h | 256 ---
.../deprecated/vpfe_capture/vpfe_capture.c | 1902 -----------------
include/media/davinci/vpfe_capture.h | 177 --
18 files changed, 6861 deletions(-)
delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/Kconfig
delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/Makefile
delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/TODO
delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/ccdc_hw_device.h
delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc.c
delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc.h
delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc_regs.h
delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc.c
delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc.h
delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc_regs.h
delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/isif.c
delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/isif.h
delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/isif_regs.h
delete mode 100644 drivers/staging/media/deprecated/vpfe_capture/vpfe_capture.c
delete mode 100644 include/media/davinci/vpfe_capture.h
diff --git a/MAINTAINERS b/MAINTAINERS
index bb3e20381128..5f18c0264e98 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20491,7 +20491,6 @@ W: https://linuxtv.org
Q: http://patchwork.linuxtv.org/project/linux-media/list/
T: git git://linuxtv.org/mhadli/v4l-dvb-davinci_devices.git
F: drivers/media/platform/ti/davinci/
-F: drivers/staging/media/deprecated/vpfe_capture/
F: include/media/davinci/
TI ENHANCED CAPTURE (eCAP) DRIVER
diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig
index d4f03b203ae5..ddab8e0a0809 100644
--- a/drivers/staging/media/Kconfig
+++ b/drivers/staging/media/Kconfig
@@ -57,7 +57,6 @@ source "drivers/staging/media/deprecated/meye/Kconfig"
source "drivers/staging/media/deprecated/saa7146/Kconfig"
source "drivers/staging/media/deprecated/stkwebcam/Kconfig"
source "drivers/staging/media/deprecated/tm6000/Kconfig"
-source "drivers/staging/media/deprecated/vpfe_capture/Kconfig"
source "drivers/staging/media/deprecated/zr364xx/Kconfig"
endif
diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile
index a387692b84f2..38e6cdfea29c 100644
--- a/drivers/staging/media/Makefile
+++ b/drivers/staging/media/Makefile
@@ -14,5 +14,4 @@ obj-$(CONFIG_VIDEO_IPU3_IMGU) += ipu3/
obj-$(CONFIG_VIDEO_TM6000) += deprecated/tm6000/
obj-$(CONFIG_VIDEO_VIU) += deprecated/fsl-viu/
obj-$(CONFIG_USB_ZR364XX) += deprecated/zr364xx/
-obj-y += deprecated/vpfe_capture/
obj-y += deprecated/saa7146/
diff --git a/drivers/staging/media/deprecated/vpfe_capture/Kconfig b/drivers/staging/media/deprecated/vpfe_capture/Kconfig
deleted file mode 100644
index 10250e7e566b..000000000000
--- a/drivers/staging/media/deprecated/vpfe_capture/Kconfig
+++ /dev/null
@@ -1,58 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-config VIDEO_DM6446_CCDC
- tristate "TI DM6446 CCDC video capture driver"
- depends on V4L_PLATFORM_DRIVERS
- depends on VIDEO_DEV
- depends on ARCH_DAVINCI || COMPILE_TEST
- depends on I2C
- select VIDEOBUF_DMA_CONTIG
- help
- Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
- with decoder modules such as TVP5146 over BT656 or
- sensor module such as MT9T001 over a raw interface. This
- module configures the interface and CCDC/ISIF to do
- video frame capture from slave decoders.
-
- This driver is deprecated and is scheduled for removal by
- the beginning of 2023. See the TODO file for more information.
-
- To compile this driver as a module, choose M here. There will
- be two modules called vpfe_capture.ko and dm644x_ccdc.ko
-
-config VIDEO_DM355_CCDC
- tristate "TI DM355 CCDC video capture driver"
- depends on V4L_PLATFORM_DRIVERS
- depends on VIDEO_DEV
- depends on ARCH_DAVINCI || COMPILE_TEST
- depends on I2C
- select VIDEOBUF_DMA_CONTIG
- help
- Enables DM355 CCD hw module. DM355 CCDC hw interfaces
- with decoder modules such as TVP5146 over BT656 or
- sensor module such as MT9T001 over a raw interface. This
- module configures the interface and CCDC/ISIF to do
- video frame capture from a slave decoders
-
- This driver is deprecated and is scheduled for removal by
- the beginning of 2023. See the TODO file for more information.
-
- To compile this driver as a module, choose M here. There will
- be two modules called vpfe_capture.ko and dm355_ccdc.ko
-
-config VIDEO_DM365_ISIF
- tristate "TI DM365 ISIF video capture driver"
- depends on V4L_PLATFORM_DRIVERS
- depends on VIDEO_DEV
- depends on ARCH_DAVINCI || COMPILE_TEST
- depends on I2C
- select VIDEOBUF_DMA_CONTIG
- help
- Enables ISIF hw module. This is the hardware module for
- configuring ISIF in VPFE to capture Raw Bayer RGB data from
- a image sensor or YUV data from a YUV source.
-
- This driver is deprecated and is scheduled for removal by
- the beginning of 2023. See the TODO file for more information.
-
- To compile this driver as a module, choose M here. There will
- be two modules called vpfe_capture.ko and isif.ko
diff --git a/drivers/staging/media/deprecated/vpfe_capture/Makefile b/drivers/staging/media/deprecated/vpfe_capture/Makefile
deleted file mode 100644
index 609e8dc09ce7..000000000000
--- a/drivers/staging/media/deprecated/vpfe_capture/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_VIDEO_DM6446_CCDC) += vpfe_capture.o dm644x_ccdc.o
-obj-$(CONFIG_VIDEO_DM355_CCDC) += vpfe_capture.o dm355_ccdc.o
-obj-$(CONFIG_VIDEO_DM365_ISIF) += vpfe_capture.o isif.o
diff --git a/drivers/staging/media/deprecated/vpfe_capture/TODO b/drivers/staging/media/deprecated/vpfe_capture/TODO
deleted file mode 100644
index ce654d7337af..000000000000
--- a/drivers/staging/media/deprecated/vpfe_capture/TODO
+++ /dev/null
@@ -1,7 +0,0 @@
-These are one of the few drivers still not using the vb2
-framework, so these drivers are now deprecated with the intent of
-removing them altogether by the beginning of 2023.
-
-In order to keep these drivers they have to be converted to vb2.
-If someone is interested in doing this work, then contact the
-linux-media mailinglist (https://linuxtv.org/lists.php).
diff --git a/drivers/staging/media/deprecated/vpfe_capture/ccdc_hw_device.h b/drivers/staging/media/deprecated/vpfe_capture/ccdc_hw_device.h
deleted file mode 100644
index a545052a95a9..000000000000
--- a/drivers/staging/media/deprecated/vpfe_capture/ccdc_hw_device.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2008-2009 Texas Instruments Inc
- *
- * ccdc device API
- */
-#ifndef _CCDC_HW_DEVICE_H
-#define _CCDC_HW_DEVICE_H
-
-#ifdef __KERNEL__
-#include <linux/videodev2.h>
-#include <linux/device.h>
-#include <media/davinci/vpfe_types.h>
-#include <media/davinci/ccdc_types.h>
-
-/*
- * ccdc hw operations
- */
-struct ccdc_hw_ops {
- /* Pointer to initialize function to initialize ccdc device */
- int (*open) (struct device *dev);
- /* Pointer to deinitialize function */
- int (*close) (struct device *dev);
- /* set ccdc base address */
- void (*set_ccdc_base)(void *base, int size);
- /* Pointer to function to enable or disable ccdc */
- void (*enable) (int en);
- /* reset sbl. only for 6446 */
- void (*reset) (void);
- /* enable output to sdram */
- void (*enable_out_to_sdram) (int en);
- /* Pointer to function to set hw parameters */
- int (*set_hw_if_params) (struct vpfe_hw_if_param *param);
- /* get interface parameters */
- int (*get_hw_if_params) (struct vpfe_hw_if_param *param);
- /* Pointer to function to configure ccdc */
- int (*configure) (void);
-
- /* Pointer to function to set buffer type */
- int (*set_buftype) (enum ccdc_buftype buf_type);
- /* Pointer to function to get buffer type */
- enum ccdc_buftype (*get_buftype) (void);
- /* Pointer to function to set frame format */
- int (*set_frame_format) (enum ccdc_frmfmt frm_fmt);
- /* Pointer to function to get frame format */
- enum ccdc_frmfmt (*get_frame_format) (void);
- /* enumerate hw pix formats */
- int (*enum_pix)(u32 *hw_pix, int i);
- /* Pointer to function to set buffer type */
- u32 (*get_pixel_format) (void);
- /* Pointer to function to get pixel format. */
- int (*set_pixel_format) (u32 pixfmt);
- /* Pointer to function to set image window */
- int (*set_image_window) (struct v4l2_rect *win);
- /* Pointer to function to set image window */
- void (*get_image_window) (struct v4l2_rect *win);
- /* Pointer to function to get line length */
- unsigned int (*get_line_length) (void);
-
- /* Pointer to function to set frame buffer address */
- void (*setfbaddr) (unsigned long addr);
- /* Pointer to function to get field id */
- int (*getfid) (void);
-};
-
-struct ccdc_hw_device {
- /* ccdc device name */
- char name[32];
- /* module owner */
- struct module *owner;
- /* hw ops */
- struct ccdc_hw_ops hw_ops;
-};
-
-/* Used by CCDC module to register & unregister with vpfe capture driver */
-int vpfe_register_ccdc_device(const struct ccdc_hw_device *dev);
-void vpfe_unregister_ccdc_device(const struct ccdc_hw_device *dev);
-
-#endif
-#endif
diff --git a/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc.c b/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc.c
deleted file mode 100644
index da8db53e9498..000000000000
--- a/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc.c
+++ /dev/null
@@ -1,934 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2005-2009 Texas Instruments Inc
- *
- * CCDC hardware module for DM355
- * ------------------------------
- *
- * This module is for configuring DM355 CCD controller of VPFE to capture
- * Raw yuv or Bayer RGB data from a decoder. CCDC has several modules
- * such as Defect Pixel Correction, Color Space Conversion etc to
- * pre-process the Bayer RGB data, before writing it to SDRAM.
- *
- * TODO: 1) Raw bayer parameter settings and bayer capture
- * 2) Split module parameter structure to module specific ioctl structs
- * 3) add support for lense shading correction
- * 4) investigate if enum used for user space type definition
- * to be replaced by #defines or integer
- */
-#include <linux/platform_device.h>
-#include <linux/uaccess.h>
-#include <linux/videodev2.h>
-#include <linux/err.h>
-#include <linux/module.h>
-
-#include "dm355_ccdc.h"
-#include <media/davinci/vpss.h>
-
-#include "dm355_ccdc_regs.h"
-#include "ccdc_hw_device.h"
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("CCDC Driver for DM355");
-MODULE_AUTHOR("Texas Instruments");
-
-static struct ccdc_oper_config {
- struct device *dev;
- /* CCDC interface type */
- enum vpfe_hw_if_type if_type;
- /* Raw Bayer configuration */
- struct ccdc_params_raw bayer;
- /* YCbCr configuration */
- struct ccdc_params_ycbcr ycbcr;
- /* ccdc base address */
- void __iomem *base_addr;
-} ccdc_cfg = {
- /* Raw configurations */
- .bayer = {
- .pix_fmt = CCDC_PIXFMT_RAW,
- .frm_fmt = CCDC_FRMFMT_PROGRESSIVE,
- .win = CCDC_WIN_VGA,
- .fid_pol = VPFE_PINPOL_POSITIVE,
- .vd_pol = VPFE_PINPOL_POSITIVE,
- .hd_pol = VPFE_PINPOL_POSITIVE,
- .gain = {
- .r_ye = 256,
- .gb_g = 256,
- .gr_cy = 256,
- .b_mg = 256
- },
- .config_params = {
- .datasft = 2,
- .mfilt1 = CCDC_NO_MEDIAN_FILTER1,
- .mfilt2 = CCDC_NO_MEDIAN_FILTER2,
- .alaw = {
- .gamma_wd = 2,
- },
- .blk_clamp = {
- .sample_pixel = 1,
- .dc_sub = 25
- },
- .col_pat_field0 = {
- .olop = CCDC_GREEN_BLUE,
- .olep = CCDC_BLUE,
- .elop = CCDC_RED,
- .elep = CCDC_GREEN_RED
- },
- .col_pat_field1 = {
- .olop = CCDC_GREEN_BLUE,
- .olep = CCDC_BLUE,
- .elop = CCDC_RED,
- .elep = CCDC_GREEN_RED
- },
- },
- },
- /* YCbCr configuration */
- .ycbcr = {
- .win = CCDC_WIN_PAL,
- .pix_fmt = CCDC_PIXFMT_YCBCR_8BIT,
- .frm_fmt = CCDC_FRMFMT_INTERLACED,
- .fid_pol = VPFE_PINPOL_POSITIVE,
- .vd_pol = VPFE_PINPOL_POSITIVE,
- .hd_pol = VPFE_PINPOL_POSITIVE,
- .bt656_enable = 1,
- .pix_order = CCDC_PIXORDER_CBYCRY,
- .buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED
- },
-};
-
-
-/* Raw Bayer formats */
-static u32 ccdc_raw_bayer_pix_formats[] =
- {V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16};
-
-/* Raw YUV formats */
-static u32 ccdc_raw_yuv_pix_formats[] =
- {V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV};
-
-/* register access routines */
-static inline u32 regr(u32 offset)
-{
- return __raw_readl(ccdc_cfg.base_addr + offset);
-}
-
-static inline void regw(u32 val, u32 offset)
-{
- __raw_writel(val, ccdc_cfg.base_addr + offset);
-}
-
-static void ccdc_enable(int en)
-{
- unsigned int temp;
- temp = regr(SYNCEN);
- temp &= (~CCDC_SYNCEN_VDHDEN_MASK);
- temp |= (en & CCDC_SYNCEN_VDHDEN_MASK);
- regw(temp, SYNCEN);
-}
-
-static void ccdc_enable_output_to_sdram(int en)
-{
- unsigned int temp;
- temp = regr(SYNCEN);
- temp &= (~(CCDC_SYNCEN_WEN_MASK));
- temp |= ((en << CCDC_SYNCEN_WEN_SHIFT) & CCDC_SYNCEN_WEN_MASK);
- regw(temp, SYNCEN);
-}
-
-static void ccdc_config_gain_offset(void)
-{
- /* configure gain */
- regw(ccdc_cfg.bayer.gain.r_ye, RYEGAIN);
- regw(ccdc_cfg.bayer.gain.gr_cy, GRCYGAIN);
- regw(ccdc_cfg.bayer.gain.gb_g, GBGGAIN);
- regw(ccdc_cfg.bayer.gain.b_mg, BMGGAIN);
- /* configure offset */
- regw(ccdc_cfg.bayer.ccdc_offset, OFFSET);
-}
-
-/*
- * ccdc_restore_defaults()
- * This function restore power on defaults in the ccdc registers
- */
-static int ccdc_restore_defaults(void)
-{
- int i;
-
- dev_dbg(ccdc_cfg.dev, "\nstarting ccdc_restore_defaults...");
- /* set all registers to zero */
- for (i = 0; i <= CCDC_REG_LAST; i += 4)
- regw(0, i);
-
- /* now override the values with power on defaults in registers */
- regw(MODESET_DEFAULT, MODESET);
- /* no culling support */
- regw(CULH_DEFAULT, CULH);
- regw(CULV_DEFAULT, CULV);
- /* Set default Gain and Offset */
- ccdc_cfg.bayer.gain.r_ye = GAIN_DEFAULT;
- ccdc_cfg.bayer.gain.gb_g = GAIN_DEFAULT;
- ccdc_cfg.bayer.gain.gr_cy = GAIN_DEFAULT;
- ccdc_cfg.bayer.gain.b_mg = GAIN_DEFAULT;
- ccdc_config_gain_offset();
- regw(OUTCLIP_DEFAULT, OUTCLIP);
- regw(LSCCFG2_DEFAULT, LSCCFG2);
- /* select ccdc input */
- if (vpss_select_ccdc_source(VPSS_CCDCIN)) {
- dev_dbg(ccdc_cfg.dev, "\ncouldn't select ccdc input source");
- return -EFAULT;
- }
- /* select ccdc clock */
- if (vpss_enable_clock(VPSS_CCDC_CLOCK, 1) < 0) {
- dev_dbg(ccdc_cfg.dev, "\ncouldn't enable ccdc clock");
- return -EFAULT;
- }
- dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_restore_defaults...");
- return 0;
-}
-
-static int ccdc_open(struct device *device)
-{
- return ccdc_restore_defaults();
-}
-
-static int ccdc_close(struct device *device)
-{
- /* disable clock */
- vpss_enable_clock(VPSS_CCDC_CLOCK, 0);
- /* do nothing for now */
- return 0;
-}
-/*
- * ccdc_setwin()
- * This function will configure the window size to
- * be capture in CCDC reg.
- */
-static void ccdc_setwin(struct v4l2_rect *image_win,
- enum ccdc_frmfmt frm_fmt, int ppc)
-{
- int horz_start, horz_nr_pixels;
- int vert_start, vert_nr_lines;
- int mid_img = 0;
-
- dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_setwin...");
-
- /*
- * ppc - per pixel count. indicates how many pixels per cell
- * output to SDRAM. example, for ycbcr, it is one y and one c, so 2.
- * raw capture this is 1
- */
- horz_start = image_win->left << (ppc - 1);
- horz_nr_pixels = ((image_win->width) << (ppc - 1)) - 1;
-
- /* Writing the horizontal info into the registers */
- regw(horz_start, SPH);
- regw(horz_nr_pixels, NPH);
- vert_start = image_win->top;
-
- if (frm_fmt == CCDC_FRMFMT_INTERLACED) {
- vert_nr_lines = (image_win->height >> 1) - 1;
- vert_start >>= 1;
- /* Since first line doesn't have any data */
- vert_start += 1;
- /* configure VDINT0 and VDINT1 */
- regw(vert_start, VDINT0);
- } else {
- /* Since first line doesn't have any data */
- vert_start += 1;
- vert_nr_lines = image_win->height - 1;
- /* configure VDINT0 and VDINT1 */
- mid_img = vert_start + (image_win->height / 2);
- regw(vert_start, VDINT0);
- regw(mid_img, VDINT1);
- }
- regw(vert_start & CCDC_START_VER_ONE_MASK, SLV0);
- regw(vert_start & CCDC_START_VER_TWO_MASK, SLV1);
- regw(vert_nr_lines & CCDC_NUM_LINES_VER, NLV);
- dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_setwin...");
-}
-
-/* This function will configure CCDC for YCbCr video capture */
-static void ccdc_config_ycbcr(void)
-{
- struct ccdc_params_ycbcr *params = &ccdc_cfg.ycbcr;
- u32 temp;
-
- /* first set the CCDC power on defaults values in all registers */
- dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_ycbcr...");
- ccdc_restore_defaults();
-
- /* configure pixel format & video frame format */
- temp = (((params->pix_fmt & CCDC_INPUT_MODE_MASK) <<
- CCDC_INPUT_MODE_SHIFT) |
- ((params->frm_fmt & CCDC_FRM_FMT_MASK) <<
- CCDC_FRM_FMT_SHIFT));
-
- /* setup BT.656 sync mode */
- if (params->bt656_enable) {
- regw(CCDC_REC656IF_BT656_EN, REC656IF);
- /*
- * configure the FID, VD, HD pin polarity fld,hd pol positive,
- * vd negative, 8-bit pack mode
- */
- temp |= CCDC_VD_POL_NEGATIVE;
- } else { /* y/c external sync mode */
- temp |= (((params->fid_pol & CCDC_FID_POL_MASK) <<
- CCDC_FID_POL_SHIFT) |
- ((params->hd_pol & CCDC_HD_POL_MASK) <<
- CCDC_HD_POL_SHIFT) |
- ((params->vd_pol & CCDC_VD_POL_MASK) <<
- CCDC_VD_POL_SHIFT));
- }
-
- /* pack the data to 8-bit */
- temp |= CCDC_DATA_PACK_ENABLE;
-
- regw(temp, MODESET);
-
- /* configure video window */
- ccdc_setwin(¶ms->win, params->frm_fmt, 2);
-
- /* configure the order of y cb cr in SD-RAM */
- temp = (params->pix_order << CCDC_Y8POS_SHIFT);
- temp |= CCDC_LATCH_ON_VSYNC_DISABLE | CCDC_CCDCFG_FIDMD_NO_LATCH_VSYNC;
- regw(temp, CCDCFG);
-
- /*
- * configure the horizontal line offset. This is done by rounding up
- * width to a multiple of 16 pixels and multiply by two to account for
- * y:cb:cr 4:2:2 data
- */
- regw(((params->win.width * 2 + 31) >> 5), HSIZE);
-
- /* configure the memory line offset */
- if (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED) {
- /* two fields are interleaved in memory */
- regw(CCDC_SDOFST_FIELD_INTERLEAVED, SDOFST);
- }
-
- dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_config_ycbcr...\n");
-}
-
-/*
- * ccdc_config_black_clamp()
- * configure parameters for Optical Black Clamp
- */
-static void ccdc_config_black_clamp(struct ccdc_black_clamp *bclamp)
-{
- u32 val;
-
- if (!bclamp->b_clamp_enable) {
- /* configure DCSub */
- regw(bclamp->dc_sub & CCDC_BLK_DC_SUB_MASK, DCSUB);
- regw(0x0000, CLAMP);
- return;
- }
- /* Enable the Black clamping, set sample lines and pixels */
- val = (bclamp->start_pixel & CCDC_BLK_ST_PXL_MASK) |
- ((bclamp->sample_pixel & CCDC_BLK_SAMPLE_LN_MASK) <<
- CCDC_BLK_SAMPLE_LN_SHIFT) | CCDC_BLK_CLAMP_ENABLE;
- regw(val, CLAMP);
-
- /* If Black clamping is enable then make dcsub 0 */
- val = (bclamp->sample_ln & CCDC_NUM_LINE_CALC_MASK)
- << CCDC_NUM_LINE_CALC_SHIFT;
- regw(val, DCSUB);
-}
-
-/*
- * ccdc_config_black_compense()
- * configure parameters for Black Compensation
- */
-static void ccdc_config_black_compense(struct ccdc_black_compensation *bcomp)
-{
- u32 val;
-
- val = (bcomp->b & CCDC_BLK_COMP_MASK) |
- ((bcomp->gb & CCDC_BLK_COMP_MASK) <<
- CCDC_BLK_COMP_GB_COMP_SHIFT);
- regw(val, BLKCMP1);
-
- val = ((bcomp->gr & CCDC_BLK_COMP_MASK) <<
- CCDC_BLK_COMP_GR_COMP_SHIFT) |
- ((bcomp->r & CCDC_BLK_COMP_MASK) <<
- CCDC_BLK_COMP_R_COMP_SHIFT);
- regw(val, BLKCMP0);
-}
-
-/*
- * ccdc_write_dfc_entry()
- * write an entry in the dfc table.
- */
-static int ccdc_write_dfc_entry(int index, struct ccdc_vertical_dft *dfc)
-{
-/* TODO This is to be re-visited and adjusted */
-#define DFC_WRITE_WAIT_COUNT 1000
- u32 val, count = DFC_WRITE_WAIT_COUNT;
-
- regw(dfc->dft_corr_vert[index], DFCMEM0);
- regw(dfc->dft_corr_horz[index], DFCMEM1);
- regw(dfc->dft_corr_sub1[index], DFCMEM2);
- regw(dfc->dft_corr_sub2[index], DFCMEM3);
- regw(dfc->dft_corr_sub3[index], DFCMEM4);
- /* set WR bit to write */
- val = regr(DFCMEMCTL) | CCDC_DFCMEMCTL_DFCMWR_MASK;
- regw(val, DFCMEMCTL);
-
- /*
- * Assume, it is very short. If we get an error, we need to
- * adjust this value
- */
- while (regr(DFCMEMCTL) & CCDC_DFCMEMCTL_DFCMWR_MASK)
- count--;
- /*
- * TODO We expect the count to be non-zero to be successful. Adjust
- * the count if write requires more time
- */
-
- if (count) {
- dev_err(ccdc_cfg.dev, "defect table write timeout !!!\n");
- return -1;
- }
- return 0;
-}
-
-/*
- * ccdc_config_vdfc()
- * configure parameters for Vertical Defect Correction
- */
-static int ccdc_config_vdfc(struct ccdc_vertical_dft *dfc)
-{
- u32 val;
- int i;
-
- /* Configure General Defect Correction. The table used is from IPIPE */
- val = dfc->gen_dft_en & CCDC_DFCCTL_GDFCEN_MASK;
-
- /* Configure Vertical Defect Correction if needed */
- if (!dfc->ver_dft_en) {
- /* Enable only General Defect Correction */
- regw(val, DFCCTL);
- return 0;
- }
-
- if (dfc->table_size > CCDC_DFT_TABLE_SIZE)
- return -EINVAL;
-
- val |= CCDC_DFCCTL_VDFC_DISABLE;
- val |= (dfc->dft_corr_ctl.vdfcsl & CCDC_DFCCTL_VDFCSL_MASK) <<
- CCDC_DFCCTL_VDFCSL_SHIFT;
- val |= (dfc->dft_corr_ctl.vdfcuda & CCDC_DFCCTL_VDFCUDA_MASK) <<
- CCDC_DFCCTL_VDFCUDA_SHIFT;
- val |= (dfc->dft_corr_ctl.vdflsft & CCDC_DFCCTL_VDFLSFT_MASK) <<
- CCDC_DFCCTL_VDFLSFT_SHIFT;
- regw(val , DFCCTL);
-
- /* clear address ptr to offset 0 */
- val = CCDC_DFCMEMCTL_DFCMARST_MASK << CCDC_DFCMEMCTL_DFCMARST_SHIFT;
-
- /* write defect table entries */
- for (i = 0; i < dfc->table_size; i++) {
- /* increment address for non zero index */
- if (i != 0)
- val = CCDC_DFCMEMCTL_INC_ADDR;
- regw(val, DFCMEMCTL);
- if (ccdc_write_dfc_entry(i, dfc) < 0)
- return -EFAULT;
- }
-
- /* update saturation level and enable dfc */
- regw(dfc->saturation_ctl & CCDC_VDC_DFCVSAT_MASK, DFCVSAT);
- val = regr(DFCCTL) | (CCDC_DFCCTL_VDFCEN_MASK <<
- CCDC_DFCCTL_VDFCEN_SHIFT);
- regw(val, DFCCTL);
- return 0;
-}
-
-/*
- * ccdc_config_csc()
- * configure parameters for color space conversion
- * Each register CSCM0-7 has two values in S8Q5 format.
- */
-static void ccdc_config_csc(struct ccdc_csc *csc)
-{
- u32 val1 = 0, val2;
- int i;
-
- if (!csc->enable)
- return;
-
- /* Enable the CSC sub-module */
- regw(CCDC_CSC_ENABLE, CSCCTL);
-
- /* Converting the co-eff as per the format of the register */
- for (i = 0; i < CCDC_CSC_COEFF_TABLE_SIZE; i++) {
- if ((i % 2) == 0) {
- /* CSCM - LSB */
- val1 = (csc->coeff[i].integer &
- CCDC_CSC_COEF_INTEG_MASK)
- << CCDC_CSC_COEF_INTEG_SHIFT;
- /*
- * convert decimal part to binary. Use 2 decimal
- * precision, user values range from .00 - 0.99
- */
- val1 |= (((csc->coeff[i].decimal &
- CCDC_CSC_COEF_DECIMAL_MASK) *
- CCDC_CSC_DEC_MAX) / 100);
- } else {
-
- /* CSCM - MSB */
- val2 = (csc->coeff[i].integer &
- CCDC_CSC_COEF_INTEG_MASK)
- << CCDC_CSC_COEF_INTEG_SHIFT;
- val2 |= (((csc->coeff[i].decimal &
- CCDC_CSC_COEF_DECIMAL_MASK) *
- CCDC_CSC_DEC_MAX) / 100);
- val2 <<= CCDC_CSCM_MSB_SHIFT;
- val2 |= val1;
- regw(val2, (CSCM0 + ((i - 1) << 1)));
- }
- }
-}
-
-/*
- * ccdc_config_color_patterns()
- * configure parameters for color patterns
- */
-static void ccdc_config_color_patterns(struct ccdc_col_pat *pat0,
- struct ccdc_col_pat *pat1)
-{
- u32 val;
-
- val = (pat0->olop | (pat0->olep << 2) | (pat0->elop << 4) |
- (pat0->elep << 6) | (pat1->olop << 8) | (pat1->olep << 10) |
- (pat1->elop << 12) | (pat1->elep << 14));
- regw(val, COLPTN);
-}
-
-/* This function will configure CCDC for Raw mode image capture */
-static int ccdc_config_raw(void)
-{
- struct ccdc_params_raw *params = &ccdc_cfg.bayer;
- struct ccdc_config_params_raw *config_params =
- &ccdc_cfg.bayer.config_params;
- unsigned int val;
-
- dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_raw...");
-
- /* restore power on defaults to register */
- ccdc_restore_defaults();
-
- /* CCDCFG register:
- * set CCD Not to swap input since input is RAW data
- * set FID detection function to Latch at V-Sync
- * set WENLOG - ccdc valid area to AND
- * set TRGSEL to WENBIT
- * set EXTRG to DISABLE
- * disable latching function on VSYNC - shadowed registers
- */
- regw(CCDC_YCINSWP_RAW | CCDC_CCDCFG_FIDMD_LATCH_VSYNC |
- CCDC_CCDCFG_WENLOG_AND | CCDC_CCDCFG_TRGSEL_WEN |
- CCDC_CCDCFG_EXTRG_DISABLE | CCDC_LATCH_ON_VSYNC_DISABLE, CCDCFG);
-
- /*
- * Set VDHD direction to input, input type to raw input
- * normal data polarity, do not use external WEN
- */
- val = (CCDC_VDHDOUT_INPUT | CCDC_RAW_IP_MODE | CCDC_DATAPOL_NORMAL |
- CCDC_EXWEN_DISABLE);
-
- /*
- * Configure the vertical sync polarity (MODESET.VDPOL), horizontal
- * sync polarity (MODESET.HDPOL), field id polarity (MODESET.FLDPOL),
- * frame format(progressive or interlace), & pixel format (Input mode)
- */
- val |= (((params->vd_pol & CCDC_VD_POL_MASK) << CCDC_VD_POL_SHIFT) |
- ((params->hd_pol & CCDC_HD_POL_MASK) << CCDC_HD_POL_SHIFT) |
- ((params->fid_pol & CCDC_FID_POL_MASK) << CCDC_FID_POL_SHIFT) |
- ((params->frm_fmt & CCDC_FRM_FMT_MASK) << CCDC_FRM_FMT_SHIFT) |
- ((params->pix_fmt & CCDC_PIX_FMT_MASK) << CCDC_PIX_FMT_SHIFT));
-
- /* set pack for alaw compression */
- if ((config_params->data_sz == CCDC_DATA_8BITS) ||
- config_params->alaw.enable)
- val |= CCDC_DATA_PACK_ENABLE;
-
- /* Configure for LPF */
- if (config_params->lpf_enable)
- val |= (config_params->lpf_enable & CCDC_LPF_MASK) <<
- CCDC_LPF_SHIFT;
-
- /* Configure the data shift */
- val |= (config_params->datasft & CCDC_DATASFT_MASK) <<
- CCDC_DATASFT_SHIFT;
- regw(val , MODESET);
- dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to MODESET...\n", val);
-
- /* Configure the Median Filter threshold */
- regw((config_params->med_filt_thres) & CCDC_MED_FILT_THRESH, MEDFILT);
-
- /* Configure GAMMAWD register. defaur 11-2, and Mosaic cfa pattern */
- val = CCDC_GAMMA_BITS_11_2 << CCDC_GAMMAWD_INPUT_SHIFT |
- CCDC_CFA_MOSAIC;
-
- /* Enable and configure aLaw register if needed */
- if (config_params->alaw.enable) {
- val |= (CCDC_ALAW_ENABLE |
- ((config_params->alaw.gamma_wd &
- CCDC_ALAW_GAMMA_WD_MASK) <<
- CCDC_GAMMAWD_INPUT_SHIFT));
- }
-
- /* Configure Median filter1 & filter2 */
- val |= ((config_params->mfilt1 << CCDC_MFILT1_SHIFT) |
- (config_params->mfilt2 << CCDC_MFILT2_SHIFT));
-
- regw(val, GAMMAWD);
- dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to GAMMAWD...\n", val);
-
- /* configure video window */
- ccdc_setwin(¶ms->win, params->frm_fmt, 1);
-
- /* Optical Clamp Averaging */
- ccdc_config_black_clamp(&config_params->blk_clamp);
-
- /* Black level compensation */
- ccdc_config_black_compense(&config_params->blk_comp);
-
- /* Vertical Defect Correction if needed */
- if (ccdc_config_vdfc(&config_params->vertical_dft) < 0)
- return -EFAULT;
-
- /* color space conversion */
- ccdc_config_csc(&config_params->csc);
-
- /* color pattern */
- ccdc_config_color_patterns(&config_params->col_pat_field0,
- &config_params->col_pat_field1);
-
- /* Configure the Gain & offset control */
- ccdc_config_gain_offset();
-
- dev_dbg(ccdc_cfg.dev, "\nWriting %x to COLPTN...\n", val);
-
- /* Configure DATAOFST register */
- val = (config_params->data_offset.horz_offset & CCDC_DATAOFST_MASK) <<
- CCDC_DATAOFST_H_SHIFT;
- val |= (config_params->data_offset.vert_offset & CCDC_DATAOFST_MASK) <<
- CCDC_DATAOFST_V_SHIFT;
- regw(val, DATAOFST);
-
- /* configuring HSIZE register */
- val = (params->horz_flip_enable & CCDC_HSIZE_FLIP_MASK) <<
- CCDC_HSIZE_FLIP_SHIFT;
-
- /* If pack 8 is enable then 1 pixel will take 1 byte */
- if ((config_params->data_sz == CCDC_DATA_8BITS) ||
- config_params->alaw.enable) {
- val |= (((params->win.width) + 31) >> 5) &
- CCDC_HSIZE_VAL_MASK;
-
- /* adjust to multiple of 32 */
- dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to HSIZE...\n",
- (((params->win.width) + 31) >> 5) &
- CCDC_HSIZE_VAL_MASK);
- } else {
- /* else one pixel will take 2 byte */
- val |= (((params->win.width * 2) + 31) >> 5) &
- CCDC_HSIZE_VAL_MASK;
-
- dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to HSIZE...\n",
- (((params->win.width * 2) + 31) >> 5) &
- CCDC_HSIZE_VAL_MASK);
- }
- regw(val, HSIZE);
-
- /* Configure SDOFST register */
- if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) {
- if (params->image_invert_enable) {
- /* For interlace inverse mode */
- regw(CCDC_SDOFST_INTERLACE_INVERSE, SDOFST);
- dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n",
- CCDC_SDOFST_INTERLACE_INVERSE);
- } else {
- /* For interlace non inverse mode */
- regw(CCDC_SDOFST_INTERLACE_NORMAL, SDOFST);
- dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n",
- CCDC_SDOFST_INTERLACE_NORMAL);
- }
- } else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) {
- if (params->image_invert_enable) {
- /* For progessive inverse mode */
- regw(CCDC_SDOFST_PROGRESSIVE_INVERSE, SDOFST);
- dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n",
- CCDC_SDOFST_PROGRESSIVE_INVERSE);
- } else {
- /* For progessive non inverse mode */
- regw(CCDC_SDOFST_PROGRESSIVE_NORMAL, SDOFST);
- dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n",
- CCDC_SDOFST_PROGRESSIVE_NORMAL);
- }
- }
- dev_dbg(ccdc_cfg.dev, "\nend of ccdc_config_raw...");
- return 0;
-}
-
-static int ccdc_configure(void)
-{
- if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
- return ccdc_config_raw();
- else
- ccdc_config_ycbcr();
- return 0;
-}
-
-static int ccdc_set_buftype(enum ccdc_buftype buf_type)
-{
- if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
- ccdc_cfg.bayer.buf_type = buf_type;
- else
- ccdc_cfg.ycbcr.buf_type = buf_type;
- return 0;
-}
-static enum ccdc_buftype ccdc_get_buftype(void)
-{
- if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
- return ccdc_cfg.bayer.buf_type;
- return ccdc_cfg.ycbcr.buf_type;
-}
-
-static int ccdc_enum_pix(u32 *pix, int i)
-{
- int ret = -EINVAL;
- if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
- if (i < ARRAY_SIZE(ccdc_raw_bayer_pix_formats)) {
- *pix = ccdc_raw_bayer_pix_formats[i];
- ret = 0;
- }
- } else {
- if (i < ARRAY_SIZE(ccdc_raw_yuv_pix_formats)) {
- *pix = ccdc_raw_yuv_pix_formats[i];
- ret = 0;
- }
- }
- return ret;
-}
-
-static int ccdc_set_pixel_format(u32 pixfmt)
-{
- struct ccdc_a_law *alaw = &ccdc_cfg.bayer.config_params.alaw;
-
- if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
- ccdc_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW;
- if (pixfmt == V4L2_PIX_FMT_SBGGR8)
- alaw->enable = 1;
- else if (pixfmt != V4L2_PIX_FMT_SBGGR16)
- return -EINVAL;
- } else {
- if (pixfmt == V4L2_PIX_FMT_YUYV)
- ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR;
- else if (pixfmt == V4L2_PIX_FMT_UYVY)
- ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
- else
- return -EINVAL;
- }
- return 0;
-}
-static u32 ccdc_get_pixel_format(void)
-{
- struct ccdc_a_law *alaw = &ccdc_cfg.bayer.config_params.alaw;
- u32 pixfmt;
-
- if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
- if (alaw->enable)
- pixfmt = V4L2_PIX_FMT_SBGGR8;
- else
- pixfmt = V4L2_PIX_FMT_SBGGR16;
- else {
- if (ccdc_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR)
- pixfmt = V4L2_PIX_FMT_YUYV;
- else
- pixfmt = V4L2_PIX_FMT_UYVY;
- }
- return pixfmt;
-}
-static int ccdc_set_image_window(struct v4l2_rect *win)
-{
- if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
- ccdc_cfg.bayer.win = *win;
- else
- ccdc_cfg.ycbcr.win = *win;
- return 0;
-}
-
-static void ccdc_get_image_window(struct v4l2_rect *win)
-{
- if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
- *win = ccdc_cfg.bayer.win;
- else
- *win = ccdc_cfg.ycbcr.win;
-}
-
-static unsigned int ccdc_get_line_length(void)
-{
- struct ccdc_config_params_raw *config_params =
- &ccdc_cfg.bayer.config_params;
- unsigned int len;
-
- if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
- if ((config_params->alaw.enable) ||
- (config_params->data_sz == CCDC_DATA_8BITS))
- len = ccdc_cfg.bayer.win.width;
- else
- len = ccdc_cfg.bayer.win.width * 2;
- } else
- len = ccdc_cfg.ycbcr.win.width * 2;
- return ALIGN(len, 32);
-}
-
-static int ccdc_set_frame_format(enum ccdc_frmfmt frm_fmt)
-{
- if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
- ccdc_cfg.bayer.frm_fmt = frm_fmt;
- else
- ccdc_cfg.ycbcr.frm_fmt = frm_fmt;
- return 0;
-}
-
-static enum ccdc_frmfmt ccdc_get_frame_format(void)
-{
- if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
- return ccdc_cfg.bayer.frm_fmt;
- else
- return ccdc_cfg.ycbcr.frm_fmt;
-}
-
-static int ccdc_getfid(void)
-{
- return (regr(MODESET) >> 15) & 1;
-}
-
-/* misc operations */
-static inline void ccdc_setfbaddr(unsigned long addr)
-{
- regw((addr >> 21) & 0x007f, STADRH);
- regw((addr >> 5) & 0x0ffff, STADRL);
-}
-
-static int ccdc_set_hw_if_params(struct vpfe_hw_if_param *params)
-{
- ccdc_cfg.if_type = params->if_type;
-
- switch (params->if_type) {
- case VPFE_BT656:
- case VPFE_YCBCR_SYNC_16:
- case VPFE_YCBCR_SYNC_8:
- ccdc_cfg.ycbcr.vd_pol = params->vdpol;
- ccdc_cfg.ycbcr.hd_pol = params->hdpol;
- break;
- default:
- /* TODO add support for raw bayer here */
- return -EINVAL;
- }
- return 0;
-}
-
-static const struct ccdc_hw_device ccdc_hw_dev = {
- .name = "DM355 CCDC",
- .owner = THIS_MODULE,
- .hw_ops = {
- .open = ccdc_open,
- .close = ccdc_close,
- .enable = ccdc_enable,
- .enable_out_to_sdram = ccdc_enable_output_to_sdram,
- .set_hw_if_params = ccdc_set_hw_if_params,
- .configure = ccdc_configure,
- .set_buftype = ccdc_set_buftype,
- .get_buftype = ccdc_get_buftype,
- .enum_pix = ccdc_enum_pix,
- .set_pixel_format = ccdc_set_pixel_format,
- .get_pixel_format = ccdc_get_pixel_format,
- .set_frame_format = ccdc_set_frame_format,
- .get_frame_format = ccdc_get_frame_format,
- .set_image_window = ccdc_set_image_window,
- .get_image_window = ccdc_get_image_window,
- .get_line_length = ccdc_get_line_length,
- .setfbaddr = ccdc_setfbaddr,
- .getfid = ccdc_getfid,
- },
-};
-
-static int dm355_ccdc_probe(struct platform_device *pdev)
-{
- void (*setup_pinmux)(void);
- struct resource *res;
- int status = 0;
-
- /*
- * first try to register with vpfe. If not correct platform, then we
- * don't have to iomap
- */
- status = vpfe_register_ccdc_device(&ccdc_hw_dev);
- if (status < 0)
- return status;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- status = -ENODEV;
- goto fail_nores;
- }
-
- res = request_mem_region(res->start, resource_size(res), res->name);
- if (!res) {
- status = -EBUSY;
- goto fail_nores;
- }
-
- ccdc_cfg.base_addr = ioremap(res->start, resource_size(res));
- if (!ccdc_cfg.base_addr) {
- status = -ENOMEM;
- goto fail_nomem;
- }
-
- /* Platform data holds setup_pinmux function ptr */
- if (NULL == pdev->dev.platform_data) {
- status = -ENODEV;
- goto fail_nomap;
- }
- setup_pinmux = pdev->dev.platform_data;
- /*
- * setup Mux configuration for ccdc which may be different for
- * different SoCs using this CCDC
- */
- setup_pinmux();
- ccdc_cfg.dev = &pdev->dev;
- printk(KERN_NOTICE "%s is registered with vpfe.\n", ccdc_hw_dev.name);
- return 0;
-fail_nomap:
- iounmap(ccdc_cfg.base_addr);
-fail_nomem:
- release_mem_region(res->start, resource_size(res));
-fail_nores:
- vpfe_unregister_ccdc_device(&ccdc_hw_dev);
- return status;
-}
-
-static int dm355_ccdc_remove(struct platform_device *pdev)
-{
- struct resource *res;
-
- iounmap(ccdc_cfg.base_addr);
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(res->start, resource_size(res));
- vpfe_unregister_ccdc_device(&ccdc_hw_dev);
- return 0;
-}
-
-static struct platform_driver dm355_ccdc_driver = {
- .driver = {
- .name = "dm355_ccdc",
- },
- .remove = dm355_ccdc_remove,
- .probe = dm355_ccdc_probe,
-};
-
-module_platform_driver(dm355_ccdc_driver);
diff --git a/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc.h b/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc.h
deleted file mode 100644
index 1f3d00aa46d1..000000000000
--- a/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc.h
+++ /dev/null
@@ -1,308 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2005-2009 Texas Instruments Inc
- */
-#ifndef _DM355_CCDC_H
-#define _DM355_CCDC_H
-#include <media/davinci/ccdc_types.h>
-#include <media/davinci/vpfe_types.h>
-
-/* enum for No of pixel per line to be avg. in Black Clamping */
-enum ccdc_sample_length {
- CCDC_SAMPLE_1PIXELS,
- CCDC_SAMPLE_2PIXELS,
- CCDC_SAMPLE_4PIXELS,
- CCDC_SAMPLE_8PIXELS,
- CCDC_SAMPLE_16PIXELS
-};
-
-/* enum for No of lines in Black Clamping */
-enum ccdc_sample_line {
- CCDC_SAMPLE_1LINES,
- CCDC_SAMPLE_2LINES,
- CCDC_SAMPLE_4LINES,
- CCDC_SAMPLE_8LINES,
- CCDC_SAMPLE_16LINES
-};
-
-/* enum for Alaw gamma width */
-enum ccdc_gamma_width {
- CCDC_GAMMA_BITS_13_4,
- CCDC_GAMMA_BITS_12_3,
- CCDC_GAMMA_BITS_11_2,
- CCDC_GAMMA_BITS_10_1,
- CCDC_GAMMA_BITS_09_0
-};
-
-enum ccdc_colpats {
- CCDC_RED,
- CCDC_GREEN_RED,
- CCDC_GREEN_BLUE,
- CCDC_BLUE
-};
-
-struct ccdc_col_pat {
- enum ccdc_colpats olop;
- enum ccdc_colpats olep;
- enum ccdc_colpats elop;
- enum ccdc_colpats elep;
-};
-
-enum ccdc_datasft {
- CCDC_DATA_NO_SHIFT,
- CCDC_DATA_SHIFT_1BIT,
- CCDC_DATA_SHIFT_2BIT,
- CCDC_DATA_SHIFT_3BIT,
- CCDC_DATA_SHIFT_4BIT,
- CCDC_DATA_SHIFT_5BIT,
- CCDC_DATA_SHIFT_6BIT
-};
-
-enum ccdc_data_size {
- CCDC_DATA_16BITS,
- CCDC_DATA_15BITS,
- CCDC_DATA_14BITS,
- CCDC_DATA_13BITS,
- CCDC_DATA_12BITS,
- CCDC_DATA_11BITS,
- CCDC_DATA_10BITS,
- CCDC_DATA_8BITS
-};
-enum ccdc_mfilt1 {
- CCDC_NO_MEDIAN_FILTER1,
- CCDC_AVERAGE_FILTER1,
- CCDC_MEDIAN_FILTER1
-};
-
-enum ccdc_mfilt2 {
- CCDC_NO_MEDIAN_FILTER2,
- CCDC_AVERAGE_FILTER2,
- CCDC_MEDIAN_FILTER2
-};
-
-/* structure for ALaw */
-struct ccdc_a_law {
- /* Enable/disable A-Law */
- unsigned char enable;
- /* Gamma Width Input */
- enum ccdc_gamma_width gamma_wd;
-};
-
-/* structure for Black Clamping */
-struct ccdc_black_clamp {
- /* only if bClampEnable is TRUE */
- unsigned char b_clamp_enable;
- /* only if bClampEnable is TRUE */
- enum ccdc_sample_length sample_pixel;
- /* only if bClampEnable is TRUE */
- enum ccdc_sample_line sample_ln;
- /* only if bClampEnable is TRUE */
- unsigned short start_pixel;
- /* only if bClampEnable is FALSE */
- unsigned short sgain;
- unsigned short dc_sub;
-};
-
-/* structure for Black Level Compensation */
-struct ccdc_black_compensation {
- /* Constant value to subtract from Red component */
- unsigned char r;
- /* Constant value to subtract from Gr component */
- unsigned char gr;
- /* Constant value to subtract from Blue component */
- unsigned char b;
- /* Constant value to subtract from Gb component */
- unsigned char gb;
-};
-
-struct ccdc_float {
- int integer;
- unsigned int decimal;
-};
-
-#define CCDC_CSC_COEFF_TABLE_SIZE 16
-/* structure for color space converter */
-struct ccdc_csc {
- unsigned char enable;
- /*
- * S8Q5. Use 2 decimal precision, user values range from -3.00 to 3.99.
- * example - to use 1.03, set integer part as 1, and decimal part as 3
- * to use -1.03, set integer part as -1 and decimal part as 3
- */
- struct ccdc_float coeff[CCDC_CSC_COEFF_TABLE_SIZE];
-};
-
-/* Structures for Vertical Defect Correction*/
-enum ccdc_vdf_csl {
- CCDC_VDF_NORMAL,
- CCDC_VDF_HORZ_INTERPOL_SAT,
- CCDC_VDF_HORZ_INTERPOL
-};
-
-enum ccdc_vdf_cuda {
- CCDC_VDF_WHOLE_LINE_CORRECT,
- CCDC_VDF_UPPER_DISABLE
-};
-
-enum ccdc_dfc_mwr {
- CCDC_DFC_MWR_WRITE_COMPLETE,
- CCDC_DFC_WRITE_REG
-};
-
-enum ccdc_dfc_mrd {
- CCDC_DFC_READ_COMPLETE,
- CCDC_DFC_READ_REG
-};
-
-enum ccdc_dfc_ma_rst {
- CCDC_DFC_INCR_ADDR,
- CCDC_DFC_CLR_ADDR
-};
-
-enum ccdc_dfc_mclr {
- CCDC_DFC_CLEAR_COMPLETE,
- CCDC_DFC_CLEAR
-};
-
-struct ccdc_dft_corr_ctl {
- enum ccdc_vdf_csl vdfcsl;
- enum ccdc_vdf_cuda vdfcuda;
- unsigned int vdflsft;
-};
-
-struct ccdc_dft_corr_mem_ctl {
- enum ccdc_dfc_mwr dfcmwr;
- enum ccdc_dfc_mrd dfcmrd;
- enum ccdc_dfc_ma_rst dfcmarst;
- enum ccdc_dfc_mclr dfcmclr;
-};
-
-#define CCDC_DFT_TABLE_SIZE 16
-/*
- * Main Structure for vertical defect correction. Vertical defect
- * correction can correct up to 16 defects if defects less than 16
- * then pad the rest with 0
- */
-struct ccdc_vertical_dft {
- unsigned char ver_dft_en;
- unsigned char gen_dft_en;
- unsigned int saturation_ctl;
- struct ccdc_dft_corr_ctl dft_corr_ctl;
- struct ccdc_dft_corr_mem_ctl dft_corr_mem_ctl;
- int table_size;
- unsigned int dft_corr_horz[CCDC_DFT_TABLE_SIZE];
- unsigned int dft_corr_vert[CCDC_DFT_TABLE_SIZE];
- unsigned int dft_corr_sub1[CCDC_DFT_TABLE_SIZE];
- unsigned int dft_corr_sub2[CCDC_DFT_TABLE_SIZE];
- unsigned int dft_corr_sub3[CCDC_DFT_TABLE_SIZE];
-};
-
-struct ccdc_data_offset {
- unsigned char horz_offset;
- unsigned char vert_offset;
-};
-
-/*
- * Structure for CCDC configuration parameters for raw capture mode passed
- * by application
- */
-struct ccdc_config_params_raw {
- /* data shift to be applied before storing */
- enum ccdc_datasft datasft;
- /* data size value from 8 to 16 bits */
- enum ccdc_data_size data_sz;
- /* median filter for sdram */
- enum ccdc_mfilt1 mfilt1;
- enum ccdc_mfilt2 mfilt2;
- /* low pass filter enable/disable */
- unsigned char lpf_enable;
- /* Threshold of median filter */
- int med_filt_thres;
- /*
- * horz and vertical data offset. Applicable for defect correction
- * and lsc
- */
- struct ccdc_data_offset data_offset;
- /* Structure for Optional A-Law */
- struct ccdc_a_law alaw;
- /* Structure for Optical Black Clamp */
- struct ccdc_black_clamp blk_clamp;
- /* Structure for Black Compensation */
- struct ccdc_black_compensation blk_comp;
- /* structure for vertical Defect Correction Module Configuration */
- struct ccdc_vertical_dft vertical_dft;
- /* structure for color space converter Module Configuration */
- struct ccdc_csc csc;
- /* color patters for bayer capture */
- struct ccdc_col_pat col_pat_field0;
- struct ccdc_col_pat col_pat_field1;
-};
-
-#ifdef __KERNEL__
-#include <linux/io.h>
-
-#define CCDC_WIN_PAL {0, 0, 720, 576}
-#define CCDC_WIN_VGA {0, 0, 640, 480}
-
-struct ccdc_params_ycbcr {
- /* pixel format */
- enum ccdc_pixfmt pix_fmt;
- /* progressive or interlaced frame */
- enum ccdc_frmfmt frm_fmt;
- /* video window */
- struct v4l2_rect win;
- /* field id polarity */
- enum vpfe_pin_pol fid_pol;
- /* vertical sync polarity */
- enum vpfe_pin_pol vd_pol;
- /* horizontal sync polarity */
- enum vpfe_pin_pol hd_pol;
- /* enable BT.656 embedded sync mode */
- int bt656_enable;
- /* cb:y:cr:y or y:cb:y:cr in memory */
- enum ccdc_pixorder pix_order;
- /* interleaved or separated fields */
- enum ccdc_buftype buf_type;
-};
-
-/* Gain applied to Raw Bayer data */
-struct ccdc_gain {
- unsigned short r_ye;
- unsigned short gr_cy;
- unsigned short gb_g;
- unsigned short b_mg;
-};
-
-/* Structure for CCDC configuration parameters for raw capture mode */
-struct ccdc_params_raw {
- /* pixel format */
- enum ccdc_pixfmt pix_fmt;
- /* progressive or interlaced frame */
- enum ccdc_frmfmt frm_fmt;
- /* video window */
- struct v4l2_rect win;
- /* field id polarity */
- enum vpfe_pin_pol fid_pol;
- /* vertical sync polarity */
- enum vpfe_pin_pol vd_pol;
- /* horizontal sync polarity */
- enum vpfe_pin_pol hd_pol;
- /* interleaved or separated fields */
- enum ccdc_buftype buf_type;
- /* Gain values */
- struct ccdc_gain gain;
- /* offset */
- unsigned int ccdc_offset;
- /* horizontal flip enable */
- unsigned char horz_flip_enable;
- /*
- * enable to store the image in inverse order in memory
- * (bottom to top)
- */
- unsigned char image_invert_enable;
- /* Configurable part of raw data */
- struct ccdc_config_params_raw config_params;
-};
-
-#endif
-#endif /* DM355_CCDC_H */
diff --git a/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc_regs.h b/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc_regs.h
deleted file mode 100644
index eb381f075245..000000000000
--- a/drivers/staging/media/deprecated/vpfe_capture/dm355_ccdc_regs.h
+++ /dev/null
@@ -1,297 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2005-2009 Texas Instruments Inc
- */
-#ifndef _DM355_CCDC_REGS_H
-#define _DM355_CCDC_REGS_H
-
-/**************************************************************************\
-* Register OFFSET Definitions
-\**************************************************************************/
-#define SYNCEN 0x00
-#define MODESET 0x04
-#define HDWIDTH 0x08
-#define VDWIDTH 0x0c
-#define PPLN 0x10
-#define LPFR 0x14
-#define SPH 0x18
-#define NPH 0x1c
-#define SLV0 0x20
-#define SLV1 0x24
-#define NLV 0x28
-#define CULH 0x2c
-#define CULV 0x30
-#define HSIZE 0x34
-#define SDOFST 0x38
-#define STADRH 0x3c
-#define STADRL 0x40
-#define CLAMP 0x44
-#define DCSUB 0x48
-#define COLPTN 0x4c
-#define BLKCMP0 0x50
-#define BLKCMP1 0x54
-#define MEDFILT 0x58
-#define RYEGAIN 0x5c
-#define GRCYGAIN 0x60
-#define GBGGAIN 0x64
-#define BMGGAIN 0x68
-#define OFFSET 0x6c
-#define OUTCLIP 0x70
-#define VDINT0 0x74
-#define VDINT1 0x78
-#define RSV0 0x7c
-#define GAMMAWD 0x80
-#define REC656IF 0x84
-#define CCDCFG 0x88
-#define FMTCFG 0x8c
-#define FMTPLEN 0x90
-#define FMTSPH 0x94
-#define FMTLNH 0x98
-#define FMTSLV 0x9c
-#define FMTLNV 0xa0
-#define FMTRLEN 0xa4
-#define FMTHCNT 0xa8
-#define FMT_ADDR_PTR_B 0xac
-#define FMT_ADDR_PTR(i) (FMT_ADDR_PTR_B + (i * 4))
-#define FMTPGM_VF0 0xcc
-#define FMTPGM_VF1 0xd0
-#define FMTPGM_AP0 0xd4
-#define FMTPGM_AP1 0xd8
-#define FMTPGM_AP2 0xdc
-#define FMTPGM_AP3 0xe0
-#define FMTPGM_AP4 0xe4
-#define FMTPGM_AP5 0xe8
-#define FMTPGM_AP6 0xec
-#define FMTPGM_AP7 0xf0
-#define LSCCFG1 0xf4
-#define LSCCFG2 0xf8
-#define LSCH0 0xfc
-#define LSCV0 0x100
-#define LSCKH 0x104
-#define LSCKV 0x108
-#define LSCMEMCTL 0x10c
-#define LSCMEMD 0x110
-#define LSCMEMQ 0x114
-#define DFCCTL 0x118
-#define DFCVSAT 0x11c
-#define DFCMEMCTL 0x120
-#define DFCMEM0 0x124
-#define DFCMEM1 0x128
-#define DFCMEM2 0x12c
-#define DFCMEM3 0x130
-#define DFCMEM4 0x134
-#define CSCCTL 0x138
-#define CSCM0 0x13c
-#define CSCM1 0x140
-#define CSCM2 0x144
-#define CSCM3 0x148
-#define CSCM4 0x14c
-#define CSCM5 0x150
-#define CSCM6 0x154
-#define CSCM7 0x158
-#define DATAOFST 0x15c
-#define CCDC_REG_LAST DATAOFST
-/**************************************************************
-* Define for various register bit mask and shifts for CCDC
-*
-**************************************************************/
-#define CCDC_RAW_IP_MODE 0
-#define CCDC_VDHDOUT_INPUT 0
-#define CCDC_YCINSWP_RAW (0 << 4)
-#define CCDC_EXWEN_DISABLE 0
-#define CCDC_DATAPOL_NORMAL 0
-#define CCDC_CCDCFG_FIDMD_LATCH_VSYNC 0
-#define CCDC_CCDCFG_FIDMD_NO_LATCH_VSYNC (1 << 6)
-#define CCDC_CCDCFG_WENLOG_AND 0
-#define CCDC_CCDCFG_TRGSEL_WEN 0
-#define CCDC_CCDCFG_EXTRG_DISABLE 0
-#define CCDC_CFA_MOSAIC 0
-#define CCDC_Y8POS_SHIFT 11
-
-#define CCDC_VDC_DFCVSAT_MASK 0x3fff
-#define CCDC_DATAOFST_MASK 0x0ff
-#define CCDC_DATAOFST_H_SHIFT 0
-#define CCDC_DATAOFST_V_SHIFT 8
-#define CCDC_GAMMAWD_CFA_MASK 1
-#define CCDC_GAMMAWD_CFA_SHIFT 5
-#define CCDC_GAMMAWD_INPUT_SHIFT 2
-#define CCDC_FID_POL_MASK 1
-#define CCDC_FID_POL_SHIFT 4
-#define CCDC_HD_POL_MASK 1
-#define CCDC_HD_POL_SHIFT 3
-#define CCDC_VD_POL_MASK 1
-#define CCDC_VD_POL_SHIFT 2
-#define CCDC_VD_POL_NEGATIVE (1 << 2)
-#define CCDC_FRM_FMT_MASK 1
-#define CCDC_FRM_FMT_SHIFT 7
-#define CCDC_DATA_SZ_MASK 7
-#define CCDC_DATA_SZ_SHIFT 8
-#define CCDC_VDHDOUT_MASK 1
-#define CCDC_VDHDOUT_SHIFT 0
-#define CCDC_EXWEN_MASK 1
-#define CCDC_EXWEN_SHIFT 5
-#define CCDC_INPUT_MODE_MASK 3
-#define CCDC_INPUT_MODE_SHIFT 12
-#define CCDC_PIX_FMT_MASK 3
-#define CCDC_PIX_FMT_SHIFT 12
-#define CCDC_DATAPOL_MASK 1
-#define CCDC_DATAPOL_SHIFT 6
-#define CCDC_WEN_ENABLE (1 << 1)
-#define CCDC_VDHDEN_ENABLE (1 << 16)
-#define CCDC_LPF_ENABLE (1 << 14)
-#define CCDC_ALAW_ENABLE 1
-#define CCDC_ALAW_GAMMA_WD_MASK 7
-#define CCDC_REC656IF_BT656_EN 3
-
-#define CCDC_FMTCFG_FMTMODE_MASK 3
-#define CCDC_FMTCFG_FMTMODE_SHIFT 1
-#define CCDC_FMTCFG_LNUM_MASK 3
-#define CCDC_FMTCFG_LNUM_SHIFT 4
-#define CCDC_FMTCFG_ADDRINC_MASK 7
-#define CCDC_FMTCFG_ADDRINC_SHIFT 8
-
-#define CCDC_CCDCFG_FIDMD_SHIFT 6
-#define CCDC_CCDCFG_WENLOG_SHIFT 8
-#define CCDC_CCDCFG_TRGSEL_SHIFT 9
-#define CCDC_CCDCFG_EXTRG_SHIFT 10
-#define CCDC_CCDCFG_MSBINVI_SHIFT 13
-
-#define CCDC_HSIZE_FLIP_SHIFT 12
-#define CCDC_HSIZE_FLIP_MASK 1
-#define CCDC_HSIZE_VAL_MASK 0xFFF
-#define CCDC_SDOFST_FIELD_INTERLEAVED 0x249
-#define CCDC_SDOFST_INTERLACE_INVERSE 0x4B6D
-#define CCDC_SDOFST_INTERLACE_NORMAL 0x0B6D
-#define CCDC_SDOFST_PROGRESSIVE_INVERSE 0x4000
-#define CCDC_SDOFST_PROGRESSIVE_NORMAL 0
-#define CCDC_START_PX_HOR_MASK 0x7FFF
-#define CCDC_NUM_PX_HOR_MASK 0x7FFF
-#define CCDC_START_VER_ONE_MASK 0x7FFF
-#define CCDC_START_VER_TWO_MASK 0x7FFF
-#define CCDC_NUM_LINES_VER 0x7FFF
-
-#define CCDC_BLK_CLAMP_ENABLE (1 << 15)
-#define CCDC_BLK_SGAIN_MASK 0x1F
-#define CCDC_BLK_ST_PXL_MASK 0x1FFF
-#define CCDC_BLK_SAMPLE_LN_MASK 3
-#define CCDC_BLK_SAMPLE_LN_SHIFT 13
-
-#define CCDC_NUM_LINE_CALC_MASK 3
-#define CCDC_NUM_LINE_CALC_SHIFT 14
-
-#define CCDC_BLK_DC_SUB_MASK 0x3FFF
-#define CCDC_BLK_COMP_MASK 0xFF
-#define CCDC_BLK_COMP_GB_COMP_SHIFT 8
-#define CCDC_BLK_COMP_GR_COMP_SHIFT 0
-#define CCDC_BLK_COMP_R_COMP_SHIFT 8
-#define CCDC_LATCH_ON_VSYNC_DISABLE (1 << 15)
-#define CCDC_LATCH_ON_VSYNC_ENABLE (0 << 15)
-#define CCDC_FPC_ENABLE (1 << 15)
-#define CCDC_FPC_FPC_NUM_MASK 0x7FFF
-#define CCDC_DATA_PACK_ENABLE (1 << 11)
-#define CCDC_FMT_HORZ_FMTLNH_MASK 0x1FFF
-#define CCDC_FMT_HORZ_FMTSPH_MASK 0x1FFF
-#define CCDC_FMT_HORZ_FMTSPH_SHIFT 16
-#define CCDC_FMT_VERT_FMTLNV_MASK 0x1FFF
-#define CCDC_FMT_VERT_FMTSLV_MASK 0x1FFF
-#define CCDC_FMT_VERT_FMTSLV_SHIFT 16
-#define CCDC_VP_OUT_VERT_NUM_MASK 0x3FFF
-#define CCDC_VP_OUT_VERT_NUM_SHIFT 17
-#define CCDC_VP_OUT_HORZ_NUM_MASK 0x1FFF
-#define CCDC_VP_OUT_HORZ_NUM_SHIFT 4
-#define CCDC_VP_OUT_HORZ_ST_MASK 0xF
-
-#define CCDC_CSC_COEF_INTEG_MASK 7
-#define CCDC_CSC_COEF_DECIMAL_MASK 0x1f
-#define CCDC_CSC_COEF_INTEG_SHIFT 5
-#define CCDC_CSCM_MSB_SHIFT 8
-#define CCDC_CSC_ENABLE 1
-#define CCDC_CSC_DEC_MAX 32
-
-#define CCDC_MFILT1_SHIFT 10
-#define CCDC_MFILT2_SHIFT 8
-#define CCDC_MED_FILT_THRESH 0x3FFF
-#define CCDC_LPF_MASK 1
-#define CCDC_LPF_SHIFT 14
-#define CCDC_OFFSET_MASK 0x3FF
-#define CCDC_DATASFT_MASK 7
-#define CCDC_DATASFT_SHIFT 8
-
-#define CCDC_DF_ENABLE 1
-
-#define CCDC_FMTPLEN_P0_MASK 0xF
-#define CCDC_FMTPLEN_P1_MASK 0xF
-#define CCDC_FMTPLEN_P2_MASK 7
-#define CCDC_FMTPLEN_P3_MASK 7
-#define CCDC_FMTPLEN_P0_SHIFT 0
-#define CCDC_FMTPLEN_P1_SHIFT 4
-#define CCDC_FMTPLEN_P2_SHIFT 8
-#define CCDC_FMTPLEN_P3_SHIFT 12
-
-#define CCDC_FMTSPH_MASK 0x1FFF
-#define CCDC_FMTLNH_MASK 0x1FFF
-#define CCDC_FMTSLV_MASK 0x1FFF
-#define CCDC_FMTLNV_MASK 0x7FFF
-#define CCDC_FMTRLEN_MASK 0x1FFF
-#define CCDC_FMTHCNT_MASK 0x1FFF
-
-#define CCDC_ADP_INIT_MASK 0x1FFF
-#define CCDC_ADP_LINE_SHIFT 13
-#define CCDC_ADP_LINE_MASK 3
-#define CCDC_FMTPGN_APTR_MASK 7
-
-#define CCDC_DFCCTL_GDFCEN_MASK 1
-#define CCDC_DFCCTL_VDFCEN_MASK 1
-#define CCDC_DFCCTL_VDFC_DISABLE (0 << 4)
-#define CCDC_DFCCTL_VDFCEN_SHIFT 4
-#define CCDC_DFCCTL_VDFCSL_MASK 3
-#define CCDC_DFCCTL_VDFCSL_SHIFT 5
-#define CCDC_DFCCTL_VDFCUDA_MASK 1
-#define CCDC_DFCCTL_VDFCUDA_SHIFT 7
-#define CCDC_DFCCTL_VDFLSFT_MASK 3
-#define CCDC_DFCCTL_VDFLSFT_SHIFT 8
-#define CCDC_DFCMEMCTL_DFCMARST_MASK 1
-#define CCDC_DFCMEMCTL_DFCMARST_SHIFT 2
-#define CCDC_DFCMEMCTL_DFCMWR_MASK 1
-#define CCDC_DFCMEMCTL_DFCMWR_SHIFT 0
-#define CCDC_DFCMEMCTL_INC_ADDR (0 << 2)
-
-#define CCDC_LSCCFG_GFTSF_MASK 7
-#define CCDC_LSCCFG_GFTSF_SHIFT 1
-#define CCDC_LSCCFG_GFTINV_MASK 0xf
-#define CCDC_LSCCFG_GFTINV_SHIFT 4
-#define CCDC_LSC_GFTABLE_SEL_MASK 3
-#define CCDC_LSC_GFTABLE_EPEL_SHIFT 8
-#define CCDC_LSC_GFTABLE_OPEL_SHIFT 10
-#define CCDC_LSC_GFTABLE_EPOL_SHIFT 12
-#define CCDC_LSC_GFTABLE_OPOL_SHIFT 14
-#define CCDC_LSC_GFMODE_MASK 3
-#define CCDC_LSC_GFMODE_SHIFT 4
-#define CCDC_LSC_DISABLE 0
-#define CCDC_LSC_ENABLE 1
-#define CCDC_LSC_TABLE1_SLC 0
-#define CCDC_LSC_TABLE2_SLC 1
-#define CCDC_LSC_TABLE3_SLC 2
-#define CCDC_LSC_MEMADDR_RESET (1 << 2)
-#define CCDC_LSC_MEMADDR_INCR (0 << 2)
-#define CCDC_LSC_FRAC_MASK_T1 0xFF
-#define CCDC_LSC_INT_MASK 3
-#define CCDC_LSC_FRAC_MASK 0x3FFF
-#define CCDC_LSC_CENTRE_MASK 0x3FFF
-#define CCDC_LSC_COEF_MASK 0xff
-#define CCDC_LSC_COEFL_SHIFT 0
-#define CCDC_LSC_COEFU_SHIFT 8
-#define CCDC_GAIN_MASK 0x7FF
-#define CCDC_SYNCEN_VDHDEN_MASK (1 << 0)
-#define CCDC_SYNCEN_WEN_MASK (1 << 1)
-#define CCDC_SYNCEN_WEN_SHIFT 1
-
-/* Power on Defaults in hardware */
-#define MODESET_DEFAULT 0x200
-#define CULH_DEFAULT 0xFFFF
-#define CULV_DEFAULT 0xFF
-#define GAIN_DEFAULT 256
-#define OUTCLIP_DEFAULT 0x3FFF
-#define LSCCFG2_DEFAULT 0xE
-
-#endif
diff --git a/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc.c b/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc.c
deleted file mode 100644
index 4a93e5ad6415..000000000000
--- a/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc.c
+++ /dev/null
@@ -1,879 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2006-2009 Texas Instruments Inc
- *
- * CCDC hardware module for DM6446
- * ------------------------------
- *
- * This module is for configuring CCD controller of DM6446 VPFE to capture
- * Raw yuv or Bayer RGB data from a decoder. CCDC has several modules
- * such as Defect Pixel Correction, Color Space Conversion etc to
- * pre-process the Raw Bayer RGB data, before writing it to SDRAM.
- * This file is named DM644x so that other variants such DM6443
- * may be supported using the same module.
- *
- * TODO: Test Raw bayer parameter settings and bayer capture
- * Split module parameter structure to module specific ioctl structs
- * investigate if enum used for user space type definition
- * to be replaced by #defines or integer
- */
-#include <linux/platform_device.h>
-#include <linux/uaccess.h>
-#include <linux/videodev2.h>
-#include <linux/gfp.h>
-#include <linux/err.h>
-#include <linux/module.h>
-
-#include "dm644x_ccdc.h"
-#include <media/davinci/vpss.h>
-
-#include "dm644x_ccdc_regs.h"
-#include "ccdc_hw_device.h"
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("CCDC Driver for DM6446");
-MODULE_AUTHOR("Texas Instruments");
-
-static struct ccdc_oper_config {
- struct device *dev;
- /* CCDC interface type */
- enum vpfe_hw_if_type if_type;
- /* Raw Bayer configuration */
- struct ccdc_params_raw bayer;
- /* YCbCr configuration */
- struct ccdc_params_ycbcr ycbcr;
- /* ccdc base address */
- void __iomem *base_addr;
-} ccdc_cfg = {
- /* Raw configurations */
- .bayer = {
- .pix_fmt = CCDC_PIXFMT_RAW,
- .frm_fmt = CCDC_FRMFMT_PROGRESSIVE,
- .win = CCDC_WIN_VGA,
- .fid_pol = VPFE_PINPOL_POSITIVE,
- .vd_pol = VPFE_PINPOL_POSITIVE,
- .hd_pol = VPFE_PINPOL_POSITIVE,
- .config_params = {
- .data_sz = CCDC_DATA_10BITS,
- },
- },
- .ycbcr = {
- .pix_fmt = CCDC_PIXFMT_YCBCR_8BIT,
- .frm_fmt = CCDC_FRMFMT_INTERLACED,
- .win = CCDC_WIN_PAL,
- .fid_pol = VPFE_PINPOL_POSITIVE,
- .vd_pol = VPFE_PINPOL_POSITIVE,
- .hd_pol = VPFE_PINPOL_POSITIVE,
- .bt656_enable = 1,
- .pix_order = CCDC_PIXORDER_CBYCRY,
- .buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED
- },
-};
-
-#define CCDC_MAX_RAW_YUV_FORMATS 2
-
-/* Raw Bayer formats */
-static u32 ccdc_raw_bayer_pix_formats[] =
- {V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16};
-
-/* Raw YUV formats */
-static u32 ccdc_raw_yuv_pix_formats[] =
- {V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV};
-
-/* CCDC Save/Restore context */
-static u32 ccdc_ctx[CCDC_REG_END / sizeof(u32)];
-
-/* register access routines */
-static inline u32 regr(u32 offset)
-{
- return __raw_readl(ccdc_cfg.base_addr + offset);
-}
-
-static inline void regw(u32 val, u32 offset)
-{
- __raw_writel(val, ccdc_cfg.base_addr + offset);
-}
-
-static void ccdc_enable(int flag)
-{
- regw(flag, CCDC_PCR);
-}
-
-static void ccdc_enable_vport(int flag)
-{
- if (flag)
- /* enable video port */
- regw(CCDC_ENABLE_VIDEO_PORT, CCDC_FMTCFG);
- else
- regw(CCDC_DISABLE_VIDEO_PORT, CCDC_FMTCFG);
-}
-
-/*
- * ccdc_setwin()
- * This function will configure the window size
- * to be capture in CCDC reg
- */
-static void ccdc_setwin(struct v4l2_rect *image_win,
- enum ccdc_frmfmt frm_fmt,
- int ppc)
-{
- int horz_start, horz_nr_pixels;
- int vert_start, vert_nr_lines;
- int val = 0, mid_img = 0;
-
- dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_setwin...");
- /*
- * ppc - per pixel count. indicates how many pixels per cell
- * output to SDRAM. example, for ycbcr, it is one y and one c, so 2.
- * raw capture this is 1
- */
- horz_start = image_win->left << (ppc - 1);
- horz_nr_pixels = (image_win->width << (ppc - 1)) - 1;
- regw((horz_start << CCDC_HORZ_INFO_SPH_SHIFT) | horz_nr_pixels,
- CCDC_HORZ_INFO);
-
- vert_start = image_win->top;
-
- if (frm_fmt == CCDC_FRMFMT_INTERLACED) {
- vert_nr_lines = (image_win->height >> 1) - 1;
- vert_start >>= 1;
- /* Since first line doesn't have any data */
- vert_start += 1;
- /* configure VDINT0 */
- val = (vert_start << CCDC_VDINT_VDINT0_SHIFT);
- regw(val, CCDC_VDINT);
-
- } else {
- /* Since first line doesn't have any data */
- vert_start += 1;
- vert_nr_lines = image_win->height - 1;
- /*
- * configure VDINT0 and VDINT1. VDINT1 will be at half
- * of image height
- */
- mid_img = vert_start + (image_win->height / 2);
- val = (vert_start << CCDC_VDINT_VDINT0_SHIFT) |
- (mid_img & CCDC_VDINT_VDINT1_MASK);
- regw(val, CCDC_VDINT);
-
- }
- regw((vert_start << CCDC_VERT_START_SLV0_SHIFT) | vert_start,
- CCDC_VERT_START);
- regw(vert_nr_lines, CCDC_VERT_LINES);
- dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_setwin...");
-}
-
-static void ccdc_readregs(void)
-{
- unsigned int val = 0;
-
- val = regr(CCDC_ALAW);
- dev_notice(ccdc_cfg.dev, "\nReading 0x%x to ALAW...\n", val);
- val = regr(CCDC_CLAMP);
- dev_notice(ccdc_cfg.dev, "\nReading 0x%x to CLAMP...\n", val);
- val = regr(CCDC_DCSUB);
- dev_notice(ccdc_cfg.dev, "\nReading 0x%x to DCSUB...\n", val);
- val = regr(CCDC_BLKCMP);
- dev_notice(ccdc_cfg.dev, "\nReading 0x%x to BLKCMP...\n", val);
- val = regr(CCDC_FPC_ADDR);
- dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FPC_ADDR...\n", val);
- val = regr(CCDC_FPC);
- dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FPC...\n", val);
- val = regr(CCDC_FMTCFG);
- dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FMTCFG...\n", val);
- val = regr(CCDC_COLPTN);
- dev_notice(ccdc_cfg.dev, "\nReading 0x%x to COLPTN...\n", val);
- val = regr(CCDC_FMT_HORZ);
- dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FMT_HORZ...\n", val);
- val = regr(CCDC_FMT_VERT);
- dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FMT_VERT...\n", val);
- val = regr(CCDC_HSIZE_OFF);
- dev_notice(ccdc_cfg.dev, "\nReading 0x%x to HSIZE_OFF...\n", val);
- val = regr(CCDC_SDOFST);
- dev_notice(ccdc_cfg.dev, "\nReading 0x%x to SDOFST...\n", val);
- val = regr(CCDC_VP_OUT);
- dev_notice(ccdc_cfg.dev, "\nReading 0x%x to VP_OUT...\n", val);
- val = regr(CCDC_SYN_MODE);
- dev_notice(ccdc_cfg.dev, "\nReading 0x%x to SYN_MODE...\n", val);
- val = regr(CCDC_HORZ_INFO);
- dev_notice(ccdc_cfg.dev, "\nReading 0x%x to HORZ_INFO...\n", val);
- val = regr(CCDC_VERT_START);
- dev_notice(ccdc_cfg.dev, "\nReading 0x%x to VERT_START...\n", val);
- val = regr(CCDC_VERT_LINES);
- dev_notice(ccdc_cfg.dev, "\nReading 0x%x to VERT_LINES...\n", val);
-}
-
-static int ccdc_close(struct device *dev)
-{
- return 0;
-}
-
-/*
- * ccdc_restore_defaults()
- * This function will write defaults to all CCDC registers
- */
-static void ccdc_restore_defaults(void)
-{
- int i;
-
- /* disable CCDC */
- ccdc_enable(0);
- /* set all registers to default value */
- for (i = 4; i <= 0x94; i += 4)
- regw(0, i);
- regw(CCDC_NO_CULLING, CCDC_CULLING);
- regw(CCDC_GAMMA_BITS_11_2, CCDC_ALAW);
-}
-
-static int ccdc_open(struct device *device)
-{
- ccdc_restore_defaults();
- if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
- ccdc_enable_vport(1);
- return 0;
-}
-
-static void ccdc_sbl_reset(void)
-{
- vpss_clear_wbl_overflow(VPSS_PCR_CCDC_WBL_O);
-}
-
-/*
- * ccdc_config_ycbcr()
- * This function will configure CCDC for YCbCr video capture
- */
-static void ccdc_config_ycbcr(void)
-{
- struct ccdc_params_ycbcr *params = &ccdc_cfg.ycbcr;
- u32 syn_mode;
-
- dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_ycbcr...");
- /*
- * first restore the CCDC registers to default values
- * This is important since we assume default values to be set in
- * a lot of registers that we didn't touch
- */
- ccdc_restore_defaults();
-
- /*
- * configure pixel format, frame format, configure video frame
- * format, enable output to SDRAM, enable internal timing generator
- * and 8bit pack mode
- */
- syn_mode = (((params->pix_fmt & CCDC_SYN_MODE_INPMOD_MASK) <<
- CCDC_SYN_MODE_INPMOD_SHIFT) |
- ((params->frm_fmt & CCDC_SYN_FLDMODE_MASK) <<
- CCDC_SYN_FLDMODE_SHIFT) | CCDC_VDHDEN_ENABLE |
- CCDC_WEN_ENABLE | CCDC_DATA_PACK_ENABLE);
-
- /* setup BT.656 sync mode */
- if (params->bt656_enable) {
- regw(CCDC_REC656IF_BT656_EN, CCDC_REC656IF);
-
- /*
- * configure the FID, VD, HD pin polarity,
- * fld,hd pol positive, vd negative, 8-bit data
- */
- syn_mode |= CCDC_SYN_MODE_VD_POL_NEGATIVE;
- if (ccdc_cfg.if_type == VPFE_BT656_10BIT)
- syn_mode |= CCDC_SYN_MODE_10BITS;
- else
- syn_mode |= CCDC_SYN_MODE_8BITS;
- } else {
- /* y/c external sync mode */
- syn_mode |= (((params->fid_pol & CCDC_FID_POL_MASK) <<
- CCDC_FID_POL_SHIFT) |
- ((params->hd_pol & CCDC_HD_POL_MASK) <<
- CCDC_HD_POL_SHIFT) |
- ((params->vd_pol & CCDC_VD_POL_MASK) <<
- CCDC_VD_POL_SHIFT));
- }
- regw(syn_mode, CCDC_SYN_MODE);
-
- /* configure video window */
- ccdc_setwin(¶ms->win, params->frm_fmt, 2);
-
- /*
- * configure the order of y cb cr in SDRAM, and disable latch
- * internal register on vsync
- */
- if (ccdc_cfg.if_type == VPFE_BT656_10BIT)
- regw((params->pix_order << CCDC_CCDCFG_Y8POS_SHIFT) |
- CCDC_LATCH_ON_VSYNC_DISABLE | CCDC_CCDCFG_BW656_10BIT,
- CCDC_CCDCFG);
- else
- regw((params->pix_order << CCDC_CCDCFG_Y8POS_SHIFT) |
- CCDC_LATCH_ON_VSYNC_DISABLE, CCDC_CCDCFG);
-
- /*
- * configure the horizontal line offset. This should be a
- * on 32 byte boundary. So clear LSB 5 bits
- */
- regw(((params->win.width * 2 + 31) & ~0x1f), CCDC_HSIZE_OFF);
-
- /* configure the memory line offset */
- if (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED)
- /* two fields are interleaved in memory */
- regw(CCDC_SDOFST_FIELD_INTERLEAVED, CCDC_SDOFST);
-
- ccdc_sbl_reset();
- dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_config_ycbcr...\n");
-}
-
-static void ccdc_config_black_clamp(struct ccdc_black_clamp *bclamp)
-{
- u32 val;
-
- if (!bclamp->enable) {
- /* configure DCSub */
- val = (bclamp->dc_sub) & CCDC_BLK_DC_SUB_MASK;
- regw(val, CCDC_DCSUB);
- dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to DCSUB...\n", val);
- regw(CCDC_CLAMP_DEFAULT_VAL, CCDC_CLAMP);
- dev_dbg(ccdc_cfg.dev, "\nWriting 0x0000 to CLAMP...\n");
- return;
- }
- /*
- * Configure gain, Start pixel, No of line to be avg,
- * No of pixel/line to be avg, & Enable the Black clamping
- */
- val = ((bclamp->sgain & CCDC_BLK_SGAIN_MASK) |
- ((bclamp->start_pixel & CCDC_BLK_ST_PXL_MASK) <<
- CCDC_BLK_ST_PXL_SHIFT) |
- ((bclamp->sample_ln & CCDC_BLK_SAMPLE_LINE_MASK) <<
- CCDC_BLK_SAMPLE_LINE_SHIFT) |
- ((bclamp->sample_pixel & CCDC_BLK_SAMPLE_LN_MASK) <<
- CCDC_BLK_SAMPLE_LN_SHIFT) | CCDC_BLK_CLAMP_ENABLE);
- regw(val, CCDC_CLAMP);
- dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to CLAMP...\n", val);
- /* If Black clamping is enable then make dcsub 0 */
- regw(CCDC_DCSUB_DEFAULT_VAL, CCDC_DCSUB);
- dev_dbg(ccdc_cfg.dev, "\nWriting 0x00000000 to DCSUB...\n");
-}
-
-static void ccdc_config_black_compense(struct ccdc_black_compensation *bcomp)
-{
- u32 val;
-
- val = ((bcomp->b & CCDC_BLK_COMP_MASK) |
- ((bcomp->gb & CCDC_BLK_COMP_MASK) <<
- CCDC_BLK_COMP_GB_COMP_SHIFT) |
- ((bcomp->gr & CCDC_BLK_COMP_MASK) <<
- CCDC_BLK_COMP_GR_COMP_SHIFT) |
- ((bcomp->r & CCDC_BLK_COMP_MASK) <<
- CCDC_BLK_COMP_R_COMP_SHIFT));
- regw(val, CCDC_BLKCMP);
-}
-
-/*
- * ccdc_config_raw()
- * This function will configure CCDC for Raw capture mode
- */
-static void ccdc_config_raw(void)
-{
- struct ccdc_params_raw *params = &ccdc_cfg.bayer;
- struct ccdc_config_params_raw *config_params =
- &ccdc_cfg.bayer.config_params;
- unsigned int syn_mode = 0;
- unsigned int val;
-
- dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_raw...");
-
- /* Reset CCDC */
- ccdc_restore_defaults();
-
- /* Disable latching function registers on VSYNC */
- regw(CCDC_LATCH_ON_VSYNC_DISABLE, CCDC_CCDCFG);
-
- /*
- * Configure the vertical sync polarity(SYN_MODE.VDPOL),
- * horizontal sync polarity (SYN_MODE.HDPOL), frame id polarity
- * (SYN_MODE.FLDPOL), frame format(progressive or interlace),
- * data size(SYNMODE.DATSIZ), &pixel format (Input mode), output
- * SDRAM, enable internal timing generator
- */
- syn_mode =
- (((params->vd_pol & CCDC_VD_POL_MASK) << CCDC_VD_POL_SHIFT) |
- ((params->hd_pol & CCDC_HD_POL_MASK) << CCDC_HD_POL_SHIFT) |
- ((params->fid_pol & CCDC_FID_POL_MASK) << CCDC_FID_POL_SHIFT) |
- ((params->frm_fmt & CCDC_FRM_FMT_MASK) << CCDC_FRM_FMT_SHIFT) |
- ((config_params->data_sz & CCDC_DATA_SZ_MASK) <<
- CCDC_DATA_SZ_SHIFT) |
- ((params->pix_fmt & CCDC_PIX_FMT_MASK) << CCDC_PIX_FMT_SHIFT) |
- CCDC_WEN_ENABLE | CCDC_VDHDEN_ENABLE);
-
- /* Enable and configure aLaw register if needed */
- if (config_params->alaw.enable) {
- val = ((config_params->alaw.gamma_wd &
- CCDC_ALAW_GAMMA_WD_MASK) | CCDC_ALAW_ENABLE);
- regw(val, CCDC_ALAW);
- dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to ALAW...\n", val);
- }
-
- /* Configure video window */
- ccdc_setwin(¶ms->win, params->frm_fmt, CCDC_PPC_RAW);
-
- /* Configure Black Clamp */
- ccdc_config_black_clamp(&config_params->blk_clamp);
-
- /* Configure Black level compensation */
- ccdc_config_black_compense(&config_params->blk_comp);
-
- /* If data size is 8 bit then pack the data */
- if ((config_params->data_sz == CCDC_DATA_8BITS) ||
- config_params->alaw.enable)
- syn_mode |= CCDC_DATA_PACK_ENABLE;
-
- /* disable video port */
- val = CCDC_DISABLE_VIDEO_PORT;
-
- if (config_params->data_sz == CCDC_DATA_8BITS)
- val |= (CCDC_DATA_10BITS & CCDC_FMTCFG_VPIN_MASK)
- << CCDC_FMTCFG_VPIN_SHIFT;
- else
- val |= (config_params->data_sz & CCDC_FMTCFG_VPIN_MASK)
- << CCDC_FMTCFG_VPIN_SHIFT;
- /* Write value in FMTCFG */
- regw(val, CCDC_FMTCFG);
-
- dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FMTCFG...\n", val);
- /* Configure the color pattern according to mt9t001 sensor */
- regw(CCDC_COLPTN_VAL, CCDC_COLPTN);
-
- dev_dbg(ccdc_cfg.dev, "\nWriting 0xBB11BB11 to COLPTN...\n");
- /*
- * Configure Data formatter(Video port) pixel selection
- * (FMT_HORZ, FMT_VERT)
- */
- val = ((params->win.left & CCDC_FMT_HORZ_FMTSPH_MASK) <<
- CCDC_FMT_HORZ_FMTSPH_SHIFT) |
- (params->win.width & CCDC_FMT_HORZ_FMTLNH_MASK);
- regw(val, CCDC_FMT_HORZ);
-
- dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FMT_HORZ...\n", val);
- val = (params->win.top & CCDC_FMT_VERT_FMTSLV_MASK)
- << CCDC_FMT_VERT_FMTSLV_SHIFT;
- if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE)
- val |= (params->win.height) & CCDC_FMT_VERT_FMTLNV_MASK;
- else
- val |= (params->win.height >> 1) & CCDC_FMT_VERT_FMTLNV_MASK;
-
- dev_dbg(ccdc_cfg.dev, "\nparams->win.height 0x%x ...\n",
- params->win.height);
- regw(val, CCDC_FMT_VERT);
-
- dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FMT_VERT...\n", val);
-
- dev_dbg(ccdc_cfg.dev, "\nbelow regw(val, FMT_VERT)...");
-
- /*
- * Configure Horizontal offset register. If pack 8 is enabled then
- * 1 pixel will take 1 byte
- */
- if ((config_params->data_sz == CCDC_DATA_8BITS) ||
- config_params->alaw.enable)
- regw((params->win.width + CCDC_32BYTE_ALIGN_VAL) &
- CCDC_HSIZE_OFF_MASK, CCDC_HSIZE_OFF);
- else
- /* else one pixel will take 2 byte */
- regw(((params->win.width * CCDC_TWO_BYTES_PER_PIXEL) +
- CCDC_32BYTE_ALIGN_VAL) & CCDC_HSIZE_OFF_MASK,
- CCDC_HSIZE_OFF);
-
- /* Set value for SDOFST */
- if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) {
- if (params->image_invert_enable) {
- /* For intelace inverse mode */
- regw(CCDC_INTERLACED_IMAGE_INVERT, CCDC_SDOFST);
- dev_dbg(ccdc_cfg.dev, "\nWriting 0x4B6D to SDOFST..\n");
- }
-
- else {
- /* For intelace non inverse mode */
- regw(CCDC_INTERLACED_NO_IMAGE_INVERT, CCDC_SDOFST);
- dev_dbg(ccdc_cfg.dev, "\nWriting 0x0249 to SDOFST..\n");
- }
- } else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) {
- regw(CCDC_PROGRESSIVE_NO_IMAGE_INVERT, CCDC_SDOFST);
- dev_dbg(ccdc_cfg.dev, "\nWriting 0x0000 to SDOFST...\n");
- }
-
- /*
- * Configure video port pixel selection (VPOUT)
- * Here -1 is to make the height value less than FMT_VERT.FMTLNV
- */
- if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE)
- val = (((params->win.height - 1) & CCDC_VP_OUT_VERT_NUM_MASK))
- << CCDC_VP_OUT_VERT_NUM_SHIFT;
- else
- val =
- ((((params->win.height >> CCDC_INTERLACED_HEIGHT_SHIFT) -
- 1) & CCDC_VP_OUT_VERT_NUM_MASK)) <<
- CCDC_VP_OUT_VERT_NUM_SHIFT;
-
- val |= ((((params->win.width))) & CCDC_VP_OUT_HORZ_NUM_MASK)
- << CCDC_VP_OUT_HORZ_NUM_SHIFT;
- val |= (params->win.left) & CCDC_VP_OUT_HORZ_ST_MASK;
- regw(val, CCDC_VP_OUT);
-
- dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to VP_OUT...\n", val);
- regw(syn_mode, CCDC_SYN_MODE);
- dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to SYN_MODE...\n", syn_mode);
-
- ccdc_sbl_reset();
- dev_dbg(ccdc_cfg.dev, "\nend of ccdc_config_raw...");
- ccdc_readregs();
-}
-
-static int ccdc_configure(void)
-{
- if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
- ccdc_config_raw();
- else
- ccdc_config_ycbcr();
- return 0;
-}
-
-static int ccdc_set_buftype(enum ccdc_buftype buf_type)
-{
- if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
- ccdc_cfg.bayer.buf_type = buf_type;
- else
- ccdc_cfg.ycbcr.buf_type = buf_type;
- return 0;
-}
-
-static enum ccdc_buftype ccdc_get_buftype(void)
-{
- if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
- return ccdc_cfg.bayer.buf_type;
- return ccdc_cfg.ycbcr.buf_type;
-}
-
-static int ccdc_enum_pix(u32 *pix, int i)
-{
- int ret = -EINVAL;
- if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
- if (i < ARRAY_SIZE(ccdc_raw_bayer_pix_formats)) {
- *pix = ccdc_raw_bayer_pix_formats[i];
- ret = 0;
- }
- } else {
- if (i < ARRAY_SIZE(ccdc_raw_yuv_pix_formats)) {
- *pix = ccdc_raw_yuv_pix_formats[i];
- ret = 0;
- }
- }
- return ret;
-}
-
-static int ccdc_set_pixel_format(u32 pixfmt)
-{
- if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
- ccdc_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW;
- if (pixfmt == V4L2_PIX_FMT_SBGGR8)
- ccdc_cfg.bayer.config_params.alaw.enable = 1;
- else if (pixfmt != V4L2_PIX_FMT_SBGGR16)
- return -EINVAL;
- } else {
- if (pixfmt == V4L2_PIX_FMT_YUYV)
- ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR;
- else if (pixfmt == V4L2_PIX_FMT_UYVY)
- ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
- else
- return -EINVAL;
- }
- return 0;
-}
-
-static u32 ccdc_get_pixel_format(void)
-{
- struct ccdc_a_law *alaw = &ccdc_cfg.bayer.config_params.alaw;
- u32 pixfmt;
-
- if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
- if (alaw->enable)
- pixfmt = V4L2_PIX_FMT_SBGGR8;
- else
- pixfmt = V4L2_PIX_FMT_SBGGR16;
- else {
- if (ccdc_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR)
- pixfmt = V4L2_PIX_FMT_YUYV;
- else
- pixfmt = V4L2_PIX_FMT_UYVY;
- }
- return pixfmt;
-}
-
-static int ccdc_set_image_window(struct v4l2_rect *win)
-{
- if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
- ccdc_cfg.bayer.win = *win;
- else
- ccdc_cfg.ycbcr.win = *win;
- return 0;
-}
-
-static void ccdc_get_image_window(struct v4l2_rect *win)
-{
- if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
- *win = ccdc_cfg.bayer.win;
- else
- *win = ccdc_cfg.ycbcr.win;
-}
-
-static unsigned int ccdc_get_line_length(void)
-{
- struct ccdc_config_params_raw *config_params =
- &ccdc_cfg.bayer.config_params;
- unsigned int len;
-
- if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
- if ((config_params->alaw.enable) ||
- (config_params->data_sz == CCDC_DATA_8BITS))
- len = ccdc_cfg.bayer.win.width;
- else
- len = ccdc_cfg.bayer.win.width * 2;
- } else
- len = ccdc_cfg.ycbcr.win.width * 2;
- return ALIGN(len, 32);
-}
-
-static int ccdc_set_frame_format(enum ccdc_frmfmt frm_fmt)
-{
- if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
- ccdc_cfg.bayer.frm_fmt = frm_fmt;
- else
- ccdc_cfg.ycbcr.frm_fmt = frm_fmt;
- return 0;
-}
-
-static enum ccdc_frmfmt ccdc_get_frame_format(void)
-{
- if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
- return ccdc_cfg.bayer.frm_fmt;
- else
- return ccdc_cfg.ycbcr.frm_fmt;
-}
-
-static int ccdc_getfid(void)
-{
- return (regr(CCDC_SYN_MODE) >> 15) & 1;
-}
-
-/* misc operations */
-static inline void ccdc_setfbaddr(unsigned long addr)
-{
- regw(addr & 0xffffffe0, CCDC_SDR_ADDR);
-}
-
-static int ccdc_set_hw_if_params(struct vpfe_hw_if_param *params)
-{
- ccdc_cfg.if_type = params->if_type;
-
- switch (params->if_type) {
- case VPFE_BT656:
- case VPFE_YCBCR_SYNC_16:
- case VPFE_YCBCR_SYNC_8:
- case VPFE_BT656_10BIT:
- ccdc_cfg.ycbcr.vd_pol = params->vdpol;
- ccdc_cfg.ycbcr.hd_pol = params->hdpol;
- break;
- default:
- /* TODO add support for raw bayer here */
- return -EINVAL;
- }
- return 0;
-}
-
-static void ccdc_save_context(void)
-{
- ccdc_ctx[CCDC_PCR >> 2] = regr(CCDC_PCR);
- ccdc_ctx[CCDC_SYN_MODE >> 2] = regr(CCDC_SYN_MODE);
- ccdc_ctx[CCDC_HD_VD_WID >> 2] = regr(CCDC_HD_VD_WID);
- ccdc_ctx[CCDC_PIX_LINES >> 2] = regr(CCDC_PIX_LINES);
- ccdc_ctx[CCDC_HORZ_INFO >> 2] = regr(CCDC_HORZ_INFO);
- ccdc_ctx[CCDC_VERT_START >> 2] = regr(CCDC_VERT_START);
- ccdc_ctx[CCDC_VERT_LINES >> 2] = regr(CCDC_VERT_LINES);
- ccdc_ctx[CCDC_CULLING >> 2] = regr(CCDC_CULLING);
- ccdc_ctx[CCDC_HSIZE_OFF >> 2] = regr(CCDC_HSIZE_OFF);
- ccdc_ctx[CCDC_SDOFST >> 2] = regr(CCDC_SDOFST);
- ccdc_ctx[CCDC_SDR_ADDR >> 2] = regr(CCDC_SDR_ADDR);
- ccdc_ctx[CCDC_CLAMP >> 2] = regr(CCDC_CLAMP);
- ccdc_ctx[CCDC_DCSUB >> 2] = regr(CCDC_DCSUB);
- ccdc_ctx[CCDC_COLPTN >> 2] = regr(CCDC_COLPTN);
- ccdc_ctx[CCDC_BLKCMP >> 2] = regr(CCDC_BLKCMP);
- ccdc_ctx[CCDC_FPC >> 2] = regr(CCDC_FPC);
- ccdc_ctx[CCDC_FPC_ADDR >> 2] = regr(CCDC_FPC_ADDR);
- ccdc_ctx[CCDC_VDINT >> 2] = regr(CCDC_VDINT);
- ccdc_ctx[CCDC_ALAW >> 2] = regr(CCDC_ALAW);
- ccdc_ctx[CCDC_REC656IF >> 2] = regr(CCDC_REC656IF);
- ccdc_ctx[CCDC_CCDCFG >> 2] = regr(CCDC_CCDCFG);
- ccdc_ctx[CCDC_FMTCFG >> 2] = regr(CCDC_FMTCFG);
- ccdc_ctx[CCDC_FMT_HORZ >> 2] = regr(CCDC_FMT_HORZ);
- ccdc_ctx[CCDC_FMT_VERT >> 2] = regr(CCDC_FMT_VERT);
- ccdc_ctx[CCDC_FMT_ADDR0 >> 2] = regr(CCDC_FMT_ADDR0);
- ccdc_ctx[CCDC_FMT_ADDR1 >> 2] = regr(CCDC_FMT_ADDR1);
- ccdc_ctx[CCDC_FMT_ADDR2 >> 2] = regr(CCDC_FMT_ADDR2);
- ccdc_ctx[CCDC_FMT_ADDR3 >> 2] = regr(CCDC_FMT_ADDR3);
- ccdc_ctx[CCDC_FMT_ADDR4 >> 2] = regr(CCDC_FMT_ADDR4);
- ccdc_ctx[CCDC_FMT_ADDR5 >> 2] = regr(CCDC_FMT_ADDR5);
- ccdc_ctx[CCDC_FMT_ADDR6 >> 2] = regr(CCDC_FMT_ADDR6);
- ccdc_ctx[CCDC_FMT_ADDR7 >> 2] = regr(CCDC_FMT_ADDR7);
- ccdc_ctx[CCDC_PRGEVEN_0 >> 2] = regr(CCDC_PRGEVEN_0);
- ccdc_ctx[CCDC_PRGEVEN_1 >> 2] = regr(CCDC_PRGEVEN_1);
- ccdc_ctx[CCDC_PRGODD_0 >> 2] = regr(CCDC_PRGODD_0);
- ccdc_ctx[CCDC_PRGODD_1 >> 2] = regr(CCDC_PRGODD_1);
- ccdc_ctx[CCDC_VP_OUT >> 2] = regr(CCDC_VP_OUT);
-}
-
-static void ccdc_restore_context(void)
-{
- regw(ccdc_ctx[CCDC_SYN_MODE >> 2], CCDC_SYN_MODE);
- regw(ccdc_ctx[CCDC_HD_VD_WID >> 2], CCDC_HD_VD_WID);
- regw(ccdc_ctx[CCDC_PIX_LINES >> 2], CCDC_PIX_LINES);
- regw(ccdc_ctx[CCDC_HORZ_INFO >> 2], CCDC_HORZ_INFO);
- regw(ccdc_ctx[CCDC_VERT_START >> 2], CCDC_VERT_START);
- regw(ccdc_ctx[CCDC_VERT_LINES >> 2], CCDC_VERT_LINES);
- regw(ccdc_ctx[CCDC_CULLING >> 2], CCDC_CULLING);
- regw(ccdc_ctx[CCDC_HSIZE_OFF >> 2], CCDC_HSIZE_OFF);
- regw(ccdc_ctx[CCDC_SDOFST >> 2], CCDC_SDOFST);
- regw(ccdc_ctx[CCDC_SDR_ADDR >> 2], CCDC_SDR_ADDR);
- regw(ccdc_ctx[CCDC_CLAMP >> 2], CCDC_CLAMP);
- regw(ccdc_ctx[CCDC_DCSUB >> 2], CCDC_DCSUB);
- regw(ccdc_ctx[CCDC_COLPTN >> 2], CCDC_COLPTN);
- regw(ccdc_ctx[CCDC_BLKCMP >> 2], CCDC_BLKCMP);
- regw(ccdc_ctx[CCDC_FPC >> 2], CCDC_FPC);
- regw(ccdc_ctx[CCDC_FPC_ADDR >> 2], CCDC_FPC_ADDR);
- regw(ccdc_ctx[CCDC_VDINT >> 2], CCDC_VDINT);
- regw(ccdc_ctx[CCDC_ALAW >> 2], CCDC_ALAW);
- regw(ccdc_ctx[CCDC_REC656IF >> 2], CCDC_REC656IF);
- regw(ccdc_ctx[CCDC_CCDCFG >> 2], CCDC_CCDCFG);
- regw(ccdc_ctx[CCDC_FMTCFG >> 2], CCDC_FMTCFG);
- regw(ccdc_ctx[CCDC_FMT_HORZ >> 2], CCDC_FMT_HORZ);
- regw(ccdc_ctx[CCDC_FMT_VERT >> 2], CCDC_FMT_VERT);
- regw(ccdc_ctx[CCDC_FMT_ADDR0 >> 2], CCDC_FMT_ADDR0);
- regw(ccdc_ctx[CCDC_FMT_ADDR1 >> 2], CCDC_FMT_ADDR1);
- regw(ccdc_ctx[CCDC_FMT_ADDR2 >> 2], CCDC_FMT_ADDR2);
- regw(ccdc_ctx[CCDC_FMT_ADDR3 >> 2], CCDC_FMT_ADDR3);
- regw(ccdc_ctx[CCDC_FMT_ADDR4 >> 2], CCDC_FMT_ADDR4);
- regw(ccdc_ctx[CCDC_FMT_ADDR5 >> 2], CCDC_FMT_ADDR5);
- regw(ccdc_ctx[CCDC_FMT_ADDR6 >> 2], CCDC_FMT_ADDR6);
- regw(ccdc_ctx[CCDC_FMT_ADDR7 >> 2], CCDC_FMT_ADDR7);
- regw(ccdc_ctx[CCDC_PRGEVEN_0 >> 2], CCDC_PRGEVEN_0);
- regw(ccdc_ctx[CCDC_PRGEVEN_1 >> 2], CCDC_PRGEVEN_1);
- regw(ccdc_ctx[CCDC_PRGODD_0 >> 2], CCDC_PRGODD_0);
- regw(ccdc_ctx[CCDC_PRGODD_1 >> 2], CCDC_PRGODD_1);
- regw(ccdc_ctx[CCDC_VP_OUT >> 2], CCDC_VP_OUT);
- regw(ccdc_ctx[CCDC_PCR >> 2], CCDC_PCR);
-}
-static const struct ccdc_hw_device ccdc_hw_dev = {
- .name = "DM6446 CCDC",
- .owner = THIS_MODULE,
- .hw_ops = {
- .open = ccdc_open,
- .close = ccdc_close,
- .reset = ccdc_sbl_reset,
- .enable = ccdc_enable,
- .set_hw_if_params = ccdc_set_hw_if_params,
- .configure = ccdc_configure,
- .set_buftype = ccdc_set_buftype,
- .get_buftype = ccdc_get_buftype,
- .enum_pix = ccdc_enum_pix,
- .set_pixel_format = ccdc_set_pixel_format,
- .get_pixel_format = ccdc_get_pixel_format,
- .set_frame_format = ccdc_set_frame_format,
- .get_frame_format = ccdc_get_frame_format,
- .set_image_window = ccdc_set_image_window,
- .get_image_window = ccdc_get_image_window,
- .get_line_length = ccdc_get_line_length,
- .setfbaddr = ccdc_setfbaddr,
- .getfid = ccdc_getfid,
- },
-};
-
-static int dm644x_ccdc_probe(struct platform_device *pdev)
-{
- struct resource *res;
- int status = 0;
-
- /*
- * first try to register with vpfe. If not correct platform, then we
- * don't have to iomap
- */
- status = vpfe_register_ccdc_device(&ccdc_hw_dev);
- if (status < 0)
- return status;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- status = -ENODEV;
- goto fail_nores;
- }
-
- res = request_mem_region(res->start, resource_size(res), res->name);
- if (!res) {
- status = -EBUSY;
- goto fail_nores;
- }
-
- ccdc_cfg.base_addr = ioremap(res->start, resource_size(res));
- if (!ccdc_cfg.base_addr) {
- status = -ENOMEM;
- goto fail_nomem;
- }
-
- ccdc_cfg.dev = &pdev->dev;
- printk(KERN_NOTICE "%s is registered with vpfe.\n", ccdc_hw_dev.name);
- return 0;
-fail_nomem:
- release_mem_region(res->start, resource_size(res));
-fail_nores:
- vpfe_unregister_ccdc_device(&ccdc_hw_dev);
- return status;
-}
-
-static int dm644x_ccdc_remove(struct platform_device *pdev)
-{
- struct resource *res;
-
- iounmap(ccdc_cfg.base_addr);
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(res->start, resource_size(res));
- vpfe_unregister_ccdc_device(&ccdc_hw_dev);
- return 0;
-}
-
-static int dm644x_ccdc_suspend(struct device *dev)
-{
- /* Save CCDC context */
- ccdc_save_context();
- /* Disable CCDC */
- ccdc_enable(0);
-
- return 0;
-}
-
-static int dm644x_ccdc_resume(struct device *dev)
-{
- /* Restore CCDC context */
- ccdc_restore_context();
-
- return 0;
-}
-
-static const struct dev_pm_ops dm644x_ccdc_pm_ops = {
- .suspend = dm644x_ccdc_suspend,
- .resume = dm644x_ccdc_resume,
-};
-
-static struct platform_driver dm644x_ccdc_driver = {
- .driver = {
- .name = "dm644x_ccdc",
- .pm = &dm644x_ccdc_pm_ops,
- },
- .remove = dm644x_ccdc_remove,
- .probe = dm644x_ccdc_probe,
-};
-
-module_platform_driver(dm644x_ccdc_driver);
diff --git a/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc.h b/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc.h
deleted file mode 100644
index c20dba3d76d6..000000000000
--- a/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2006-2009 Texas Instruments Inc
- */
-#ifndef _DM644X_CCDC_H
-#define _DM644X_CCDC_H
-#include <media/davinci/ccdc_types.h>
-#include <media/davinci/vpfe_types.h>
-
-/* enum for No of pixel per line to be avg. in Black Clamping*/
-enum ccdc_sample_length {
- CCDC_SAMPLE_1PIXELS,
- CCDC_SAMPLE_2PIXELS,
- CCDC_SAMPLE_4PIXELS,
- CCDC_SAMPLE_8PIXELS,
- CCDC_SAMPLE_16PIXELS
-};
-
-/* enum for No of lines in Black Clamping */
-enum ccdc_sample_line {
- CCDC_SAMPLE_1LINES,
- CCDC_SAMPLE_2LINES,
- CCDC_SAMPLE_4LINES,
- CCDC_SAMPLE_8LINES,
- CCDC_SAMPLE_16LINES
-};
-
-/* enum for Alaw gamma width */
-enum ccdc_gamma_width {
- CCDC_GAMMA_BITS_15_6, /* use bits 15-6 for gamma */
- CCDC_GAMMA_BITS_14_5,
- CCDC_GAMMA_BITS_13_4,
- CCDC_GAMMA_BITS_12_3,
- CCDC_GAMMA_BITS_11_2,
- CCDC_GAMMA_BITS_10_1,
- CCDC_GAMMA_BITS_09_0 /* use bits 9-0 for gamma */
-};
-
-/* returns the highest bit used for the gamma */
-static inline u8 ccdc_gamma_width_max_bit(enum ccdc_gamma_width width)
-{
- return 15 - width;
-}
-
-enum ccdc_data_size {
- CCDC_DATA_16BITS,
- CCDC_DATA_15BITS,
- CCDC_DATA_14BITS,
- CCDC_DATA_13BITS,
- CCDC_DATA_12BITS,
- CCDC_DATA_11BITS,
- CCDC_DATA_10BITS,
- CCDC_DATA_8BITS
-};
-
-/* returns the highest bit used for this data size */
-static inline u8 ccdc_data_size_max_bit(enum ccdc_data_size sz)
-{
- return sz == CCDC_DATA_8BITS ? 7 : 15 - sz;
-}
-
-/* structure for ALaw */
-struct ccdc_a_law {
- /* Enable/disable A-Law */
- unsigned char enable;
- /* Gamma Width Input */
- enum ccdc_gamma_width gamma_wd;
-};
-
-/* structure for Black Clamping */
-struct ccdc_black_clamp {
- unsigned char enable;
- /* only if bClampEnable is TRUE */
- enum ccdc_sample_length sample_pixel;
- /* only if bClampEnable is TRUE */
- enum ccdc_sample_line sample_ln;
- /* only if bClampEnable is TRUE */
- unsigned short start_pixel;
- /* only if bClampEnable is TRUE */
- unsigned short sgain;
- /* only if bClampEnable is FALSE */
- unsigned short dc_sub;
-};
-
-/* structure for Black Level Compensation */
-struct ccdc_black_compensation {
- /* Constant value to subtract from Red component */
- char r;
- /* Constant value to subtract from Gr component */
- char gr;
- /* Constant value to subtract from Blue component */
- char b;
- /* Constant value to subtract from Gb component */
- char gb;
-};
-
-/* Structure for CCDC configuration parameters for raw capture mode passed
- * by application
- */
-struct ccdc_config_params_raw {
- /* data size value from 8 to 16 bits */
- enum ccdc_data_size data_sz;
- /* Structure for Optional A-Law */
- struct ccdc_a_law alaw;
- /* Structure for Optical Black Clamp */
- struct ccdc_black_clamp blk_clamp;
- /* Structure for Black Compensation */
- struct ccdc_black_compensation blk_comp;
-};
-
-
-#ifdef __KERNEL__
-#include <linux/io.h>
-/* Define to enable/disable video port */
-#define FP_NUM_BYTES 4
-/* Define for extra pixel/line and extra lines/frame */
-#define NUM_EXTRAPIXELS 8
-#define NUM_EXTRALINES 8
-
-/* settings for commonly used video formats */
-#define CCDC_WIN_PAL {0, 0, 720, 576}
-/* ntsc square pixel */
-#define CCDC_WIN_VGA {0, 0, (640 + NUM_EXTRAPIXELS), (480 + NUM_EXTRALINES)}
-
-/* Structure for CCDC configuration parameters for raw capture mode */
-struct ccdc_params_raw {
- /* pixel format */
- enum ccdc_pixfmt pix_fmt;
- /* progressive or interlaced frame */
- enum ccdc_frmfmt frm_fmt;
- /* video window */
- struct v4l2_rect win;
- /* field id polarity */
- enum vpfe_pin_pol fid_pol;
- /* vertical sync polarity */
- enum vpfe_pin_pol vd_pol;
- /* horizontal sync polarity */
- enum vpfe_pin_pol hd_pol;
- /* interleaved or separated fields */
- enum ccdc_buftype buf_type;
- /*
- * enable to store the image in inverse
- * order in memory(bottom to top)
- */
- unsigned char image_invert_enable;
- /* configurable parameters */
- struct ccdc_config_params_raw config_params;
-};
-
-struct ccdc_params_ycbcr {
- /* pixel format */
- enum ccdc_pixfmt pix_fmt;
- /* progressive or interlaced frame */
- enum ccdc_frmfmt frm_fmt;
- /* video window */
- struct v4l2_rect win;
- /* field id polarity */
- enum vpfe_pin_pol fid_pol;
- /* vertical sync polarity */
- enum vpfe_pin_pol vd_pol;
- /* horizontal sync polarity */
- enum vpfe_pin_pol hd_pol;
- /* enable BT.656 embedded sync mode */
- int bt656_enable;
- /* cb:y:cr:y or y:cb:y:cr in memory */
- enum ccdc_pixorder pix_order;
- /* interleaved or separated fields */
- enum ccdc_buftype buf_type;
-};
-#endif
-#endif /* _DM644X_CCDC_H */
diff --git a/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc_regs.h b/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc_regs.h
deleted file mode 100644
index c4894f6a254e..000000000000
--- a/drivers/staging/media/deprecated/vpfe_capture/dm644x_ccdc_regs.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2006-2009 Texas Instruments Inc
- */
-#ifndef _DM644X_CCDC_REGS_H
-#define _DM644X_CCDC_REGS_H
-
-/**************************************************************************\
-* Register OFFSET Definitions
-\**************************************************************************/
-#define CCDC_PID 0x0
-#define CCDC_PCR 0x4
-#define CCDC_SYN_MODE 0x8
-#define CCDC_HD_VD_WID 0xc
-#define CCDC_PIX_LINES 0x10
-#define CCDC_HORZ_INFO 0x14
-#define CCDC_VERT_START 0x18
-#define CCDC_VERT_LINES 0x1c
-#define CCDC_CULLING 0x20
-#define CCDC_HSIZE_OFF 0x24
-#define CCDC_SDOFST 0x28
-#define CCDC_SDR_ADDR 0x2c
-#define CCDC_CLAMP 0x30
-#define CCDC_DCSUB 0x34
-#define CCDC_COLPTN 0x38
-#define CCDC_BLKCMP 0x3c
-#define CCDC_FPC 0x40
-#define CCDC_FPC_ADDR 0x44
-#define CCDC_VDINT 0x48
-#define CCDC_ALAW 0x4c
-#define CCDC_REC656IF 0x50
-#define CCDC_CCDCFG 0x54
-#define CCDC_FMTCFG 0x58
-#define CCDC_FMT_HORZ 0x5c
-#define CCDC_FMT_VERT 0x60
-#define CCDC_FMT_ADDR0 0x64
-#define CCDC_FMT_ADDR1 0x68
-#define CCDC_FMT_ADDR2 0x6c
-#define CCDC_FMT_ADDR3 0x70
-#define CCDC_FMT_ADDR4 0x74
-#define CCDC_FMT_ADDR5 0x78
-#define CCDC_FMT_ADDR6 0x7c
-#define CCDC_FMT_ADDR7 0x80
-#define CCDC_PRGEVEN_0 0x84
-#define CCDC_PRGEVEN_1 0x88
-#define CCDC_PRGODD_0 0x8c
-#define CCDC_PRGODD_1 0x90
-#define CCDC_VP_OUT 0x94
-#define CCDC_REG_END 0x98
-
-/***************************************************************
-* Define for various register bit mask and shifts for CCDC
-****************************************************************/
-#define CCDC_FID_POL_MASK 1
-#define CCDC_FID_POL_SHIFT 4
-#define CCDC_HD_POL_MASK 1
-#define CCDC_HD_POL_SHIFT 3
-#define CCDC_VD_POL_MASK 1
-#define CCDC_VD_POL_SHIFT 2
-#define CCDC_HSIZE_OFF_MASK 0xffffffe0
-#define CCDC_32BYTE_ALIGN_VAL 31
-#define CCDC_FRM_FMT_MASK 0x1
-#define CCDC_FRM_FMT_SHIFT 7
-#define CCDC_DATA_SZ_MASK 7
-#define CCDC_DATA_SZ_SHIFT 8
-#define CCDC_PIX_FMT_MASK 3
-#define CCDC_PIX_FMT_SHIFT 12
-#define CCDC_VP2SDR_DISABLE 0xFFFBFFFF
-#define CCDC_WEN_ENABLE BIT(17)
-#define CCDC_SDR2RSZ_DISABLE 0xFFF7FFFF
-#define CCDC_VDHDEN_ENABLE BIT(16)
-#define CCDC_LPF_ENABLE BIT(14)
-#define CCDC_ALAW_ENABLE BIT(3)
-#define CCDC_ALAW_GAMMA_WD_MASK 7
-#define CCDC_BLK_CLAMP_ENABLE BIT(31)
-#define CCDC_BLK_SGAIN_MASK 0x1F
-#define CCDC_BLK_ST_PXL_MASK 0x7FFF
-#define CCDC_BLK_ST_PXL_SHIFT 10
-#define CCDC_BLK_SAMPLE_LN_MASK 7
-#define CCDC_BLK_SAMPLE_LN_SHIFT 28
-#define CCDC_BLK_SAMPLE_LINE_MASK 7
-#define CCDC_BLK_SAMPLE_LINE_SHIFT 25
-#define CCDC_BLK_DC_SUB_MASK 0x03FFF
-#define CCDC_BLK_COMP_MASK 0xFF
-#define CCDC_BLK_COMP_GB_COMP_SHIFT 8
-#define CCDC_BLK_COMP_GR_COMP_SHIFT 16
-#define CCDC_BLK_COMP_R_COMP_SHIFT 24
-#define CCDC_LATCH_ON_VSYNC_DISABLE BIT(15)
-#define CCDC_FPC_ENABLE BIT(15)
-#define CCDC_FPC_DISABLE 0
-#define CCDC_FPC_FPC_NUM_MASK 0x7FFF
-#define CCDC_DATA_PACK_ENABLE BIT(11)
-#define CCDC_FMTCFG_VPIN_MASK 7
-#define CCDC_FMTCFG_VPIN_SHIFT 12
-#define CCDC_FMT_HORZ_FMTLNH_MASK 0x1FFF
-#define CCDC_FMT_HORZ_FMTSPH_MASK 0x1FFF
-#define CCDC_FMT_HORZ_FMTSPH_SHIFT 16
-#define CCDC_FMT_VERT_FMTLNV_MASK 0x1FFF
-#define CCDC_FMT_VERT_FMTSLV_MASK 0x1FFF
-#define CCDC_FMT_VERT_FMTSLV_SHIFT 16
-#define CCDC_VP_OUT_VERT_NUM_MASK 0x3FFF
-#define CCDC_VP_OUT_VERT_NUM_SHIFT 17
-#define CCDC_VP_OUT_HORZ_NUM_MASK 0x1FFF
-#define CCDC_VP_OUT_HORZ_NUM_SHIFT 4
-#define CCDC_VP_OUT_HORZ_ST_MASK 0xF
-#define CCDC_HORZ_INFO_SPH_SHIFT 16
-#define CCDC_VERT_START_SLV0_SHIFT 16
-#define CCDC_VDINT_VDINT0_SHIFT 16
-#define CCDC_VDINT_VDINT1_MASK 0xFFFF
-#define CCDC_PPC_RAW 1
-#define CCDC_DCSUB_DEFAULT_VAL 0
-#define CCDC_CLAMP_DEFAULT_VAL 0
-#define CCDC_ENABLE_VIDEO_PORT 0x8000
-#define CCDC_DISABLE_VIDEO_PORT 0
-#define CCDC_COLPTN_VAL 0xBB11BB11
-#define CCDC_TWO_BYTES_PER_PIXEL 2
-#define CCDC_INTERLACED_IMAGE_INVERT 0x4B6D
-#define CCDC_INTERLACED_NO_IMAGE_INVERT 0x0249
-#define CCDC_PROGRESSIVE_IMAGE_INVERT 0x4000
-#define CCDC_PROGRESSIVE_NO_IMAGE_INVERT 0
-#define CCDC_INTERLACED_HEIGHT_SHIFT 1
-#define CCDC_SYN_MODE_INPMOD_SHIFT 12
-#define CCDC_SYN_MODE_INPMOD_MASK 3
-#define CCDC_SYN_MODE_8BITS (7 << 8)
-#define CCDC_SYN_MODE_10BITS (6 << 8)
-#define CCDC_SYN_MODE_11BITS (5 << 8)
-#define CCDC_SYN_MODE_12BITS (4 << 8)
-#define CCDC_SYN_MODE_13BITS (3 << 8)
-#define CCDC_SYN_MODE_14BITS (2 << 8)
-#define CCDC_SYN_MODE_15BITS (1 << 8)
-#define CCDC_SYN_MODE_16BITS (0 << 8)
-#define CCDC_SYN_FLDMODE_MASK 1
-#define CCDC_SYN_FLDMODE_SHIFT 7
-#define CCDC_REC656IF_BT656_EN 3
-#define CCDC_SYN_MODE_VD_POL_NEGATIVE BIT(2)
-#define CCDC_CCDCFG_Y8POS_SHIFT 11
-#define CCDC_CCDCFG_BW656_10BIT BIT(5)
-#define CCDC_SDOFST_FIELD_INTERLEAVED 0x249
-#define CCDC_NO_CULLING 0xffff00ff
-#endif
diff --git a/drivers/staging/media/deprecated/vpfe_capture/isif.c b/drivers/staging/media/deprecated/vpfe_capture/isif.c
deleted file mode 100644
index 4059891c2824..000000000000
--- a/drivers/staging/media/deprecated/vpfe_capture/isif.c
+++ /dev/null
@@ -1,1127 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2008-2009 Texas Instruments Inc
- *
- * Image Sensor Interface (ISIF) driver
- *
- * This driver is for configuring the ISIF IP available on DM365 or any other
- * TI SoCs. This is used for capturing yuv or bayer video or image data
- * from a decoder or sensor. This IP is similar to the CCDC IP on DM355
- * and DM6446, but with enhanced or additional ip blocks. The driver
- * configures the ISIF upon commands from the vpfe bridge driver through
- * ccdc_hw_device interface.
- *
- * TODO: 1) Raw bayer parameter settings and bayer capture
- * 2) Add support for control ioctl
- */
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/uaccess.h>
-#include <linux/io.h>
-#include <linux/videodev2.h>
-#include <linux/err.h>
-#include <linux/module.h>
-
-#include "isif.h"
-#include <media/davinci/vpss.h>
-
-#include "isif_regs.h"
-#include "ccdc_hw_device.h"
-
-/* Defaults for module configuration parameters */
-static const struct isif_config_params_raw isif_config_defaults = {
- .linearize = {
- .en = 0,
- .corr_shft = ISIF_NO_SHIFT,
- .scale_fact = {1, 0},
- },
- .df_csc = {
- .df_or_csc = 0,
- .csc = {
- .en = 0,
- },
- },
- .dfc = {
- .en = 0,
- },
- .bclamp = {
- .en = 0,
- },
- .gain_offset = {
- .gain = {
- .r_ye = {1, 0},
- .gr_cy = {1, 0},
- .gb_g = {1, 0},
- .b_mg = {1, 0},
- },
- },
- .culling = {
- .hcpat_odd = 0xff,
- .hcpat_even = 0xff,
- .vcpat = 0xff,
- },
- .compress = {
- .alg = ISIF_ALAW,
- },
-};
-
-/* ISIF operation configuration */
-static struct isif_oper_config {
- struct device *dev;
- enum vpfe_hw_if_type if_type;
- struct isif_ycbcr_config ycbcr;
- struct isif_params_raw bayer;
- enum isif_data_pack data_pack;
- /* ISIF base address */
- void __iomem *base_addr;
- /* ISIF Linear Table 0 */
- void __iomem *linear_tbl0_addr;
- /* ISIF Linear Table 1 */
- void __iomem *linear_tbl1_addr;
-} isif_cfg = {
- .ycbcr = {
- .pix_fmt = CCDC_PIXFMT_YCBCR_8BIT,
- .frm_fmt = CCDC_FRMFMT_INTERLACED,
- .win = ISIF_WIN_NTSC,
- .fid_pol = VPFE_PINPOL_POSITIVE,
- .vd_pol = VPFE_PINPOL_POSITIVE,
- .hd_pol = VPFE_PINPOL_POSITIVE,
- .pix_order = CCDC_PIXORDER_CBYCRY,
- .buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED,
- },
- .bayer = {
- .pix_fmt = CCDC_PIXFMT_RAW,
- .frm_fmt = CCDC_FRMFMT_PROGRESSIVE,
- .win = ISIF_WIN_VGA,
- .fid_pol = VPFE_PINPOL_POSITIVE,
- .vd_pol = VPFE_PINPOL_POSITIVE,
- .hd_pol = VPFE_PINPOL_POSITIVE,
- .gain = {
- .r_ye = {1, 0},
- .gr_cy = {1, 0},
- .gb_g = {1, 0},
- .b_mg = {1, 0},
- },
- .cfa_pat = ISIF_CFA_PAT_MOSAIC,
- .data_msb = ISIF_BIT_MSB_11,
- .config_params = {
- .data_shift = ISIF_NO_SHIFT,
- .col_pat_field0 = {
- .olop = ISIF_GREEN_BLUE,
- .olep = ISIF_BLUE,
- .elop = ISIF_RED,
- .elep = ISIF_GREEN_RED,
- },
- .col_pat_field1 = {
- .olop = ISIF_GREEN_BLUE,
- .olep = ISIF_BLUE,
- .elop = ISIF_RED,
- .elep = ISIF_GREEN_RED,
- },
- .test_pat_gen = 0,
- },
- },
- .data_pack = ISIF_DATA_PACK8,
-};
-
-/* Raw Bayer formats */
-static const u32 isif_raw_bayer_pix_formats[] = {
- V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16};
-
-/* Raw YUV formats */
-static const u32 isif_raw_yuv_pix_formats[] = {
- V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV};
-
-/* register access routines */
-static inline u32 regr(u32 offset)
-{
- return __raw_readl(isif_cfg.base_addr + offset);
-}
-
-static inline void regw(u32 val, u32 offset)
-{
- __raw_writel(val, isif_cfg.base_addr + offset);
-}
-
-/* reg_modify() - read, modify and write register */
-static inline u32 reg_modify(u32 mask, u32 val, u32 offset)
-{
- u32 new_val = (regr(offset) & ~mask) | (val & mask);
-
- regw(new_val, offset);
- return new_val;
-}
-
-static inline void regw_lin_tbl(u32 val, u32 offset, int i)
-{
- if (!i)
- __raw_writel(val, isif_cfg.linear_tbl0_addr + offset);
- else
- __raw_writel(val, isif_cfg.linear_tbl1_addr + offset);
-}
-
-static void isif_disable_all_modules(void)
-{
- /* disable BC */
- regw(0, CLAMPCFG);
- /* disable vdfc */
- regw(0, DFCCTL);
- /* disable CSC */
- regw(0, CSCCTL);
- /* disable linearization */
- regw(0, LINCFG0);
- /* disable other modules here as they are supported */
-}
-
-static void isif_enable(int en)
-{
- if (!en) {
- /* Before disable isif, disable all ISIF modules */
- isif_disable_all_modules();
- /*
- * wait for next VD. Assume lowest scan rate is 12 Hz. So
- * 100 msec delay is good enough
- */
- msleep(100);
- }
- reg_modify(ISIF_SYNCEN_VDHDEN_MASK, en, SYNCEN);
-}
-
-static void isif_enable_output_to_sdram(int en)
-{
- reg_modify(ISIF_SYNCEN_WEN_MASK, en << ISIF_SYNCEN_WEN_SHIFT, SYNCEN);
-}
-
-static void isif_config_culling(struct isif_cul *cul)
-{
- u32 val;
-
- /* Horizontal pattern */
- val = (cul->hcpat_even << CULL_PAT_EVEN_LINE_SHIFT) | cul->hcpat_odd;
- regw(val, CULH);
-
- /* vertical pattern */
- regw(cul->vcpat, CULV);
-
- /* LPF */
- reg_modify(ISIF_LPF_MASK << ISIF_LPF_SHIFT,
- cul->en_lpf << ISIF_LPF_SHIFT, MODESET);
-}
-
-static void isif_config_gain_offset(void)
-{
- struct isif_gain_offsets_adj *gain_off_p =
- &isif_cfg.bayer.config_params.gain_offset;
- u32 val;
-
- val = (!!gain_off_p->gain_sdram_en << GAIN_SDRAM_EN_SHIFT) |
- (!!gain_off_p->gain_ipipe_en << GAIN_IPIPE_EN_SHIFT) |
- (!!gain_off_p->gain_h3a_en << GAIN_H3A_EN_SHIFT) |
- (!!gain_off_p->offset_sdram_en << OFST_SDRAM_EN_SHIFT) |
- (!!gain_off_p->offset_ipipe_en << OFST_IPIPE_EN_SHIFT) |
- (!!gain_off_p->offset_h3a_en << OFST_H3A_EN_SHIFT);
-
- reg_modify(GAIN_OFFSET_EN_MASK, val, CGAMMAWD);
-
- val = (gain_off_p->gain.r_ye.integer << GAIN_INTEGER_SHIFT) |
- gain_off_p->gain.r_ye.decimal;
- regw(val, CRGAIN);
-
- val = (gain_off_p->gain.gr_cy.integer << GAIN_INTEGER_SHIFT) |
- gain_off_p->gain.gr_cy.decimal;
- regw(val, CGRGAIN);
-
- val = (gain_off_p->gain.gb_g.integer << GAIN_INTEGER_SHIFT) |
- gain_off_p->gain.gb_g.decimal;
- regw(val, CGBGAIN);
-
- val = (gain_off_p->gain.b_mg.integer << GAIN_INTEGER_SHIFT) |
- gain_off_p->gain.b_mg.decimal;
- regw(val, CBGAIN);
-
- regw(gain_off_p->offset, COFSTA);
-}
-
-static void isif_restore_defaults(void)
-{
- enum vpss_ccdc_source_sel source = VPSS_CCDCIN;
-
- dev_dbg(isif_cfg.dev, "\nstarting isif_restore_defaults...");
- isif_cfg.bayer.config_params = isif_config_defaults;
- /* Enable clock to ISIF, IPIPEIF and BL */
- vpss_enable_clock(VPSS_CCDC_CLOCK, 1);
- vpss_enable_clock(VPSS_IPIPEIF_CLOCK, 1);
- vpss_enable_clock(VPSS_BL_CLOCK, 1);
- /* Set default offset and gain */
- isif_config_gain_offset();
- vpss_select_ccdc_source(source);
- dev_dbg(isif_cfg.dev, "\nEnd of isif_restore_defaults...");
-}
-
-static int isif_open(struct device *device)
-{
- isif_restore_defaults();
- return 0;
-}
-
-/* This function will configure the window size to be capture in ISIF reg */
-static void isif_setwin(struct v4l2_rect *image_win,
- enum ccdc_frmfmt frm_fmt, int ppc)
-{
- int horz_start, horz_nr_pixels;
- int vert_start, vert_nr_lines;
- int mid_img = 0;
-
- dev_dbg(isif_cfg.dev, "\nStarting isif_setwin...");
- /*
- * ppc - per pixel count. indicates how many pixels per cell
- * output to SDRAM. example, for ycbcr, it is one y and one c, so 2.
- * raw capture this is 1
- */
- horz_start = image_win->left << (ppc - 1);
- horz_nr_pixels = ((image_win->width) << (ppc - 1)) - 1;
-
- /* Writing the horizontal info into the registers */
- regw(horz_start & START_PX_HOR_MASK, SPH);
- regw(horz_nr_pixels & NUM_PX_HOR_MASK, LNH);
- vert_start = image_win->top;
-
- if (frm_fmt == CCDC_FRMFMT_INTERLACED) {
- vert_nr_lines = (image_win->height >> 1) - 1;
- vert_start >>= 1;
- /* To account for VD since line 0 doesn't have any data */
- vert_start += 1;
- } else {
- /* To account for VD since line 0 doesn't have any data */
- vert_start += 1;
- vert_nr_lines = image_win->height - 1;
- /* configure VDINT0 and VDINT1 */
- mid_img = vert_start + (image_win->height / 2);
- regw(mid_img, VDINT1);
- }
-
- regw(0, VDINT0);
- regw(vert_start & START_VER_ONE_MASK, SLV0);
- regw(vert_start & START_VER_TWO_MASK, SLV1);
- regw(vert_nr_lines & NUM_LINES_VER, LNV);
-}
-
-static void isif_config_bclamp(struct isif_black_clamp *bc)
-{
- u32 val;
-
- /*
- * DC Offset is always added to image data irrespective of bc enable
- * status
- */
- regw(bc->dc_offset, CLDCOFST);
-
- if (bc->en) {
- val = bc->bc_mode_color << ISIF_BC_MODE_COLOR_SHIFT;
-
- /* Enable BC and horizontal clamp calculation parameters */
- val = val | 1 | (bc->horz.mode << ISIF_HORZ_BC_MODE_SHIFT);
-
- regw(val, CLAMPCFG);
-
- if (bc->horz.mode != ISIF_HORZ_BC_DISABLE) {
- /*
- * Window count for calculation
- * Base window selection
- * pixel limit
- * Horizontal size of window
- * vertical size of the window
- * Horizontal start position of the window
- * Vertical start position of the window
- */
- val = bc->horz.win_count_calc |
- ((!!bc->horz.base_win_sel_calc) <<
- ISIF_HORZ_BC_WIN_SEL_SHIFT) |
- ((!!bc->horz.clamp_pix_limit) <<
- ISIF_HORZ_BC_PIX_LIMIT_SHIFT) |
- (bc->horz.win_h_sz_calc <<
- ISIF_HORZ_BC_WIN_H_SIZE_SHIFT) |
- (bc->horz.win_v_sz_calc <<
- ISIF_HORZ_BC_WIN_V_SIZE_SHIFT);
- regw(val, CLHWIN0);
-
- regw(bc->horz.win_start_h_calc, CLHWIN1);
- regw(bc->horz.win_start_v_calc, CLHWIN2);
- }
-
- /* vertical clamp calculation parameters */
-
- /* Reset clamp value sel for previous line */
- val |=
- (bc->vert.reset_val_sel << ISIF_VERT_BC_RST_VAL_SEL_SHIFT) |
- (bc->vert.line_ave_coef << ISIF_VERT_BC_LINE_AVE_COEF_SHIFT);
- regw(val, CLVWIN0);
-
- /* Optical Black horizontal start position */
- regw(bc->vert.ob_start_h, CLVWIN1);
- /* Optical Black vertical start position */
- regw(bc->vert.ob_start_v, CLVWIN2);
- /* Optical Black vertical size for calculation */
- regw(bc->vert.ob_v_sz_calc, CLVWIN3);
- /* Vertical start position for BC subtraction */
- regw(bc->vert_start_sub, CLSV);
- }
-}
-
-static void isif_config_linearization(struct isif_linearize *linearize)
-{
- u32 val, i;
-
- if (!linearize->en) {
- regw(0, LINCFG0);
- return;
- }
-
- /* shift value for correction & enable linearization (set lsb) */
- val = (linearize->corr_shft << ISIF_LIN_CORRSFT_SHIFT) | 1;
- regw(val, LINCFG0);
-
- /* Scale factor */
- val = ((!!linearize->scale_fact.integer) <<
- ISIF_LIN_SCALE_FACT_INTEG_SHIFT) |
- linearize->scale_fact.decimal;
- regw(val, LINCFG1);
-
- for (i = 0; i < ISIF_LINEAR_TAB_SIZE; i++) {
- if (i % 2)
- regw_lin_tbl(linearize->table[i], ((i >> 1) << 2), 1);
- else
- regw_lin_tbl(linearize->table[i], ((i >> 1) << 2), 0);
- }
-}
-
-static int isif_config_dfc(struct isif_dfc *vdfc)
-{
- /* initialize retries to loop for max ~ 250 usec */
- u32 val, count, retries = loops_per_jiffy / (4000/HZ);
- int i;
-
- if (!vdfc->en)
- return 0;
-
- /* Correction mode */
- val = (vdfc->corr_mode << ISIF_VDFC_CORR_MOD_SHIFT);
-
- /* Correct whole line or partial */
- if (vdfc->corr_whole_line)
- val |= 1 << ISIF_VDFC_CORR_WHOLE_LN_SHIFT;
-
- /* level shift value */
- val |= vdfc->def_level_shift << ISIF_VDFC_LEVEL_SHFT_SHIFT;
-
- regw(val, DFCCTL);
-
- /* Defect saturation level */
- regw(vdfc->def_sat_level, VDFSATLV);
-
- regw(vdfc->table[0].pos_vert, DFCMEM0);
- regw(vdfc->table[0].pos_horz, DFCMEM1);
- if (vdfc->corr_mode == ISIF_VDFC_NORMAL ||
- vdfc->corr_mode == ISIF_VDFC_HORZ_INTERPOL_IF_SAT) {
- regw(vdfc->table[0].level_at_pos, DFCMEM2);
- regw(vdfc->table[0].level_up_pixels, DFCMEM3);
- regw(vdfc->table[0].level_low_pixels, DFCMEM4);
- }
-
- /* set DFCMARST and set DFCMWR */
- val = regr(DFCMEMCTL) | (1 << ISIF_DFCMEMCTL_DFCMARST_SHIFT) | 1;
- regw(val, DFCMEMCTL);
-
- count = retries;
- while (count && (regr(DFCMEMCTL) & 0x1))
- count--;
-
- if (!count) {
- dev_dbg(isif_cfg.dev, "defect table write timeout !!!\n");
- return -1;
- }
-
- for (i = 1; i < vdfc->num_vdefects; i++) {
- regw(vdfc->table[i].pos_vert, DFCMEM0);
- regw(vdfc->table[i].pos_horz, DFCMEM1);
- if (vdfc->corr_mode == ISIF_VDFC_NORMAL ||
- vdfc->corr_mode == ISIF_VDFC_HORZ_INTERPOL_IF_SAT) {
- regw(vdfc->table[i].level_at_pos, DFCMEM2);
- regw(vdfc->table[i].level_up_pixels, DFCMEM3);
- regw(vdfc->table[i].level_low_pixels, DFCMEM4);
- }
- val = regr(DFCMEMCTL);
- /* clear DFCMARST and set DFCMWR */
- val &= ~BIT(ISIF_DFCMEMCTL_DFCMARST_SHIFT);
- val |= 1;
- regw(val, DFCMEMCTL);
-
- count = retries;
- while (count && (regr(DFCMEMCTL) & 0x1))
- count--;
-
- if (!count) {
- dev_err(isif_cfg.dev,
- "defect table write timeout !!!\n");
- return -1;
- }
- }
- if (vdfc->num_vdefects < ISIF_VDFC_TABLE_SIZE) {
- /* Extra cycle needed */
- regw(0, DFCMEM0);
- regw(0x1FFF, DFCMEM1);
- regw(1, DFCMEMCTL);
- }
-
- /* enable VDFC */
- reg_modify((1 << ISIF_VDFC_EN_SHIFT), (1 << ISIF_VDFC_EN_SHIFT),
- DFCCTL);
- return 0;
-}
-
-static void isif_config_csc(struct isif_df_csc *df_csc)
-{
- u32 val1 = 0, val2 = 0, i;
-
- if (!df_csc->csc.en) {
- regw(0, CSCCTL);
- return;
- }
- for (i = 0; i < ISIF_CSC_NUM_COEFF; i++) {
- if ((i % 2) == 0) {
- /* CSCM - LSB */
- val1 = (df_csc->csc.coeff[i].integer <<
- ISIF_CSC_COEF_INTEG_SHIFT) |
- df_csc->csc.coeff[i].decimal;
- } else {
-
- /* CSCM - MSB */
- val2 = (df_csc->csc.coeff[i].integer <<
- ISIF_CSC_COEF_INTEG_SHIFT) |
- df_csc->csc.coeff[i].decimal;
- val2 <<= ISIF_CSCM_MSB_SHIFT;
- val2 |= val1;
- regw(val2, (CSCM0 + ((i - 1) << 1)));
- }
- }
-
- /* program the active area */
- regw(df_csc->start_pix, FMTSPH);
- /*
- * one extra pixel as required for CSC. Actually number of
- * pixel - 1 should be configured in this register. So we
- * need to subtract 1 before writing to FMTSPH, but we will
- * not do this since csc requires one extra pixel
- */
- regw(df_csc->num_pixels, FMTLNH);
- regw(df_csc->start_line, FMTSLV);
- /*
- * one extra line as required for CSC. See reason documented for
- * num_pixels
- */
- regw(df_csc->num_lines, FMTLNV);
-
- /* Enable CSC */
- regw(1, CSCCTL);
-}
-
-static int isif_config_raw(void)
-{
- struct isif_params_raw *params = &isif_cfg.bayer;
- struct isif_config_params_raw *module_params =
- &isif_cfg.bayer.config_params;
- struct vpss_pg_frame_size frame_size;
- struct vpss_sync_pol sync;
- u32 val;
-
- dev_dbg(isif_cfg.dev, "\nStarting isif_config_raw..\n");
-
- /*
- * Configure CCDCFG register:-
- * Set CCD Not to swap input since input is RAW data
- * Set FID detection function to Latch at V-Sync
- * Set WENLOG - isif valid area
- * Set TRGSEL
- * Set EXTRG
- * Packed to 8 or 16 bits
- */
-
- val = ISIF_YCINSWP_RAW | ISIF_CCDCFG_FIDMD_LATCH_VSYNC |
- ISIF_CCDCFG_WENLOG_AND | ISIF_CCDCFG_TRGSEL_WEN |
- ISIF_CCDCFG_EXTRG_DISABLE | isif_cfg.data_pack;
-
- dev_dbg(isif_cfg.dev, "Writing 0x%x to ...CCDCFG \n", val);
- regw(val, CCDCFG);
-
- /*
- * Configure the vertical sync polarity(MODESET.VDPOL)
- * Configure the horizontal sync polarity (MODESET.HDPOL)
- * Configure frame id polarity (MODESET.FLDPOL)
- * Configure data polarity
- * Configure External WEN Selection
- * Configure frame format(progressive or interlace)
- * Configure pixel format (Input mode)
- * Configure the data shift
- */
-
- val = ISIF_VDHDOUT_INPUT | (params->vd_pol << ISIF_VD_POL_SHIFT) |
- (params->hd_pol << ISIF_HD_POL_SHIFT) |
- (params->fid_pol << ISIF_FID_POL_SHIFT) |
- (ISIF_DATAPOL_NORMAL << ISIF_DATAPOL_SHIFT) |
- (ISIF_EXWEN_DISABLE << ISIF_EXWEN_SHIFT) |
- (params->frm_fmt << ISIF_FRM_FMT_SHIFT) |
- (params->pix_fmt << ISIF_INPUT_SHIFT) |
- (params->config_params.data_shift << ISIF_DATASFT_SHIFT);
-
- regw(val, MODESET);
- dev_dbg(isif_cfg.dev, "Writing 0x%x to MODESET...\n", val);
-
- /*
- * Configure GAMMAWD register
- * CFA pattern setting
- */
- val = params->cfa_pat << ISIF_GAMMAWD_CFA_SHIFT;
-
- /* Gamma msb */
- if (module_params->compress.alg == ISIF_ALAW)
- val |= ISIF_ALAW_ENABLE;
-
- val |= (params->data_msb << ISIF_ALAW_GAMMA_WD_SHIFT);
- regw(val, CGAMMAWD);
-
- /* Configure DPCM compression settings */
- if (module_params->compress.alg == ISIF_DPCM) {
- val = BIT(ISIF_DPCM_EN_SHIFT) |
- (module_params->compress.pred <<
- ISIF_DPCM_PREDICTOR_SHIFT);
- }
-
- regw(val, MISC);
-
- /* Configure Gain & Offset */
- isif_config_gain_offset();
-
- /* Configure Color pattern */
- val = (params->config_params.col_pat_field0.olop) |
- (params->config_params.col_pat_field0.olep << 2) |
- (params->config_params.col_pat_field0.elop << 4) |
- (params->config_params.col_pat_field0.elep << 6) |
- (params->config_params.col_pat_field1.olop << 8) |
- (params->config_params.col_pat_field1.olep << 10) |
- (params->config_params.col_pat_field1.elop << 12) |
- (params->config_params.col_pat_field1.elep << 14);
- regw(val, CCOLP);
- dev_dbg(isif_cfg.dev, "Writing %x to CCOLP ...\n", val);
-
- /* Configure HSIZE register */
- val = (!!params->horz_flip_en) << ISIF_HSIZE_FLIP_SHIFT;
-
- /* calculate line offset in 32 bytes based on pack value */
- if (isif_cfg.data_pack == ISIF_PACK_8BIT)
- val |= ((params->win.width + 31) >> 5);
- else if (isif_cfg.data_pack == ISIF_PACK_12BIT)
- val |= (((params->win.width +
- (params->win.width >> 2)) + 31) >> 5);
- else
- val |= (((params->win.width * 2) + 31) >> 5);
- regw(val, HSIZE);
-
- /* Configure SDOFST register */
- if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) {
- if (params->image_invert_en) {
- /* For interlace inverse mode */
- regw(0x4B6D, SDOFST);
- dev_dbg(isif_cfg.dev, "Writing 0x4B6D to SDOFST...\n");
- } else {
- /* For interlace non inverse mode */
- regw(0x0B6D, SDOFST);
- dev_dbg(isif_cfg.dev, "Writing 0x0B6D to SDOFST...\n");
- }
- } else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) {
- if (params->image_invert_en) {
- /* For progressive inverse mode */
- regw(0x4000, SDOFST);
- dev_dbg(isif_cfg.dev, "Writing 0x4000 to SDOFST...\n");
- } else {
- /* For progressive non inverse mode */
- regw(0x0000, SDOFST);
- dev_dbg(isif_cfg.dev, "Writing 0x0000 to SDOFST...\n");
- }
- }
-
- /* Configure video window */
- isif_setwin(¶ms->win, params->frm_fmt, 1);
-
- /* Configure Black Clamp */
- isif_config_bclamp(&module_params->bclamp);
-
- /* Configure Vertical Defection Pixel Correction */
- if (isif_config_dfc(&module_params->dfc) < 0)
- return -EFAULT;
-
- if (!module_params->df_csc.df_or_csc)
- /* Configure Color Space Conversion */
- isif_config_csc(&module_params->df_csc);
-
- isif_config_linearization(&module_params->linearize);
-
- /* Configure Culling */
- isif_config_culling(&module_params->culling);
-
- /* Configure horizontal and vertical offsets(DFC,LSC,Gain) */
- regw(module_params->horz_offset, DATAHOFST);
- regw(module_params->vert_offset, DATAVOFST);
-
- /* Setup test pattern if enabled */
- if (params->config_params.test_pat_gen) {
- /* Use the HD/VD pol settings from user */
- sync.ccdpg_hdpol = params->hd_pol;
- sync.ccdpg_vdpol = params->vd_pol;
- dm365_vpss_set_sync_pol(sync);
- frame_size.hlpfr = isif_cfg.bayer.win.width;
- frame_size.pplen = isif_cfg.bayer.win.height;
- dm365_vpss_set_pg_frame_size(frame_size);
- vpss_select_ccdc_source(VPSS_PGLPBK);
- }
-
- dev_dbg(isif_cfg.dev, "\nEnd of isif_config_ycbcr...\n");
- return 0;
-}
-
-static int isif_set_buftype(enum ccdc_buftype buf_type)
-{
- if (isif_cfg.if_type == VPFE_RAW_BAYER)
- isif_cfg.bayer.buf_type = buf_type;
- else
- isif_cfg.ycbcr.buf_type = buf_type;
-
- return 0;
-
-}
-static enum ccdc_buftype isif_get_buftype(void)
-{
- if (isif_cfg.if_type == VPFE_RAW_BAYER)
- return isif_cfg.bayer.buf_type;
-
- return isif_cfg.ycbcr.buf_type;
-}
-
-static int isif_enum_pix(u32 *pix, int i)
-{
- int ret = -EINVAL;
-
- if (isif_cfg.if_type == VPFE_RAW_BAYER) {
- if (i < ARRAY_SIZE(isif_raw_bayer_pix_formats)) {
- *pix = isif_raw_bayer_pix_formats[i];
- ret = 0;
- }
- } else {
- if (i < ARRAY_SIZE(isif_raw_yuv_pix_formats)) {
- *pix = isif_raw_yuv_pix_formats[i];
- ret = 0;
- }
- }
-
- return ret;
-}
-
-static int isif_set_pixel_format(unsigned int pixfmt)
-{
- if (isif_cfg.if_type == VPFE_RAW_BAYER) {
- if (pixfmt == V4L2_PIX_FMT_SBGGR8) {
- if ((isif_cfg.bayer.config_params.compress.alg !=
- ISIF_ALAW) &&
- (isif_cfg.bayer.config_params.compress.alg !=
- ISIF_DPCM)) {
- dev_dbg(isif_cfg.dev,
- "Either configure A-Law or DPCM\n");
- return -EINVAL;
- }
- isif_cfg.data_pack = ISIF_PACK_8BIT;
- } else if (pixfmt == V4L2_PIX_FMT_SBGGR16) {
- isif_cfg.bayer.config_params.compress.alg =
- ISIF_NO_COMPRESSION;
- isif_cfg.data_pack = ISIF_PACK_16BIT;
- } else
- return -EINVAL;
- isif_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW;
- } else {
- if (pixfmt == V4L2_PIX_FMT_YUYV)
- isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR;
- else if (pixfmt == V4L2_PIX_FMT_UYVY)
- isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
- else
- return -EINVAL;
- isif_cfg.data_pack = ISIF_PACK_8BIT;
- }
- return 0;
-}
-
-static u32 isif_get_pixel_format(void)
-{
- u32 pixfmt;
-
- if (isif_cfg.if_type == VPFE_RAW_BAYER)
- if (isif_cfg.bayer.config_params.compress.alg == ISIF_ALAW ||
- isif_cfg.bayer.config_params.compress.alg == ISIF_DPCM)
- pixfmt = V4L2_PIX_FMT_SBGGR8;
- else
- pixfmt = V4L2_PIX_FMT_SBGGR16;
- else {
- if (isif_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR)
- pixfmt = V4L2_PIX_FMT_YUYV;
- else
- pixfmt = V4L2_PIX_FMT_UYVY;
- }
- return pixfmt;
-}
-
-static int isif_set_image_window(struct v4l2_rect *win)
-{
- if (isif_cfg.if_type == VPFE_RAW_BAYER) {
- isif_cfg.bayer.win.top = win->top;
- isif_cfg.bayer.win.left = win->left;
- isif_cfg.bayer.win.width = win->width;
- isif_cfg.bayer.win.height = win->height;
- } else {
- isif_cfg.ycbcr.win.top = win->top;
- isif_cfg.ycbcr.win.left = win->left;
- isif_cfg.ycbcr.win.width = win->width;
- isif_cfg.ycbcr.win.height = win->height;
- }
- return 0;
-}
-
-static void isif_get_image_window(struct v4l2_rect *win)
-{
- if (isif_cfg.if_type == VPFE_RAW_BAYER)
- *win = isif_cfg.bayer.win;
- else
- *win = isif_cfg.ycbcr.win;
-}
-
-static unsigned int isif_get_line_length(void)
-{
- unsigned int len;
-
- if (isif_cfg.if_type == VPFE_RAW_BAYER) {
- if (isif_cfg.data_pack == ISIF_PACK_8BIT)
- len = ((isif_cfg.bayer.win.width));
- else if (isif_cfg.data_pack == ISIF_PACK_12BIT)
- len = (((isif_cfg.bayer.win.width * 2) +
- (isif_cfg.bayer.win.width >> 2)));
- else
- len = (((isif_cfg.bayer.win.width * 2)));
- } else
- len = (((isif_cfg.ycbcr.win.width * 2)));
- return ALIGN(len, 32);
-}
-
-static int isif_set_frame_format(enum ccdc_frmfmt frm_fmt)
-{
- if (isif_cfg.if_type == VPFE_RAW_BAYER)
- isif_cfg.bayer.frm_fmt = frm_fmt;
- else
- isif_cfg.ycbcr.frm_fmt = frm_fmt;
- return 0;
-}
-static enum ccdc_frmfmt isif_get_frame_format(void)
-{
- if (isif_cfg.if_type == VPFE_RAW_BAYER)
- return isif_cfg.bayer.frm_fmt;
- return isif_cfg.ycbcr.frm_fmt;
-}
-
-static int isif_getfid(void)
-{
- return (regr(MODESET) >> 15) & 0x1;
-}
-
-/* misc operations */
-static void isif_setfbaddr(unsigned long addr)
-{
- regw((addr >> 21) & 0x07ff, CADU);
- regw((addr >> 5) & 0x0ffff, CADL);
-}
-
-static int isif_set_hw_if_params(struct vpfe_hw_if_param *params)
-{
- isif_cfg.if_type = params->if_type;
-
- switch (params->if_type) {
- case VPFE_BT656:
- case VPFE_BT656_10BIT:
- case VPFE_YCBCR_SYNC_8:
- isif_cfg.ycbcr.pix_fmt = CCDC_PIXFMT_YCBCR_8BIT;
- isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
- break;
- case VPFE_BT1120:
- case VPFE_YCBCR_SYNC_16:
- isif_cfg.ycbcr.pix_fmt = CCDC_PIXFMT_YCBCR_16BIT;
- isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
- break;
- case VPFE_RAW_BAYER:
- isif_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW;
- break;
- default:
- dev_dbg(isif_cfg.dev, "Invalid interface type\n");
- return -EINVAL;
- }
-
- return 0;
-}
-
-/* This function will configure ISIF for YCbCr parameters. */
-static int isif_config_ycbcr(void)
-{
- struct isif_ycbcr_config *params = &isif_cfg.ycbcr;
- u32 modeset = 0, ccdcfg = 0;
-
- dev_dbg(isif_cfg.dev, "\nStarting isif_config_ycbcr...");
-
- /* configure pixel format or input mode */
- modeset = modeset | (params->pix_fmt << ISIF_INPUT_SHIFT) |
- (params->frm_fmt << ISIF_FRM_FMT_SHIFT) |
- (params->fid_pol << ISIF_FID_POL_SHIFT) |
- (params->hd_pol << ISIF_HD_POL_SHIFT) |
- (params->vd_pol << ISIF_VD_POL_SHIFT);
-
- /* pack the data to 8-bit ISIFCFG */
- switch (isif_cfg.if_type) {
- case VPFE_BT656:
- if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) {
- dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n");
- return -EINVAL;
- }
- modeset |= (VPFE_PINPOL_NEGATIVE << ISIF_VD_POL_SHIFT);
- regw(3, REC656IF);
- ccdcfg = ccdcfg | ISIF_DATA_PACK8 | ISIF_YCINSWP_YCBCR;
- break;
- case VPFE_BT656_10BIT:
- if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) {
- dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n");
- return -EINVAL;
- }
- /* setup BT.656, embedded sync */
- regw(3, REC656IF);
- /* enable 10 bit mode in ccdcfg */
- ccdcfg = ccdcfg | ISIF_DATA_PACK8 | ISIF_YCINSWP_YCBCR |
- ISIF_BW656_ENABLE;
- break;
- case VPFE_BT1120:
- if (params->pix_fmt != CCDC_PIXFMT_YCBCR_16BIT) {
- dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n");
- return -EINVAL;
- }
- regw(3, REC656IF);
- break;
-
- case VPFE_YCBCR_SYNC_8:
- ccdcfg |= ISIF_DATA_PACK8;
- ccdcfg |= ISIF_YCINSWP_YCBCR;
- if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) {
- dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n");
- return -EINVAL;
- }
- break;
- case VPFE_YCBCR_SYNC_16:
- if (params->pix_fmt != CCDC_PIXFMT_YCBCR_16BIT) {
- dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n");
- return -EINVAL;
- }
- break;
- default:
- /* should never come here */
- dev_dbg(isif_cfg.dev, "Invalid interface type\n");
- return -EINVAL;
- }
-
- regw(modeset, MODESET);
-
- /* Set up pix order */
- ccdcfg |= params->pix_order << ISIF_PIX_ORDER_SHIFT;
-
- regw(ccdcfg, CCDCFG);
-
- /* configure video window */
- if ((isif_cfg.if_type == VPFE_BT1120) ||
- (isif_cfg.if_type == VPFE_YCBCR_SYNC_16))
- isif_setwin(¶ms->win, params->frm_fmt, 1);
- else
- isif_setwin(¶ms->win, params->frm_fmt, 2);
-
- /*
- * configure the horizontal line offset
- * this is done by rounding up width to a multiple of 16 pixels
- * and multiply by two to account for y:cb:cr 4:2:2 data
- */
- regw(((((params->win.width * 2) + 31) & 0xffffffe0) >> 5), HSIZE);
-
- /* configure the memory line offset */
- if ((params->frm_fmt == CCDC_FRMFMT_INTERLACED) &&
- (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED))
- /* two fields are interleaved in memory */
- regw(0x00000249, SDOFST);
-
- return 0;
-}
-
-static int isif_configure(void)
-{
- if (isif_cfg.if_type == VPFE_RAW_BAYER)
- return isif_config_raw();
- return isif_config_ycbcr();
-}
-
-static int isif_close(struct device *device)
-{
- /* copy defaults to module params */
- isif_cfg.bayer.config_params = isif_config_defaults;
- return 0;
-}
-
-static const struct ccdc_hw_device isif_hw_dev = {
- .name = "ISIF",
- .owner = THIS_MODULE,
- .hw_ops = {
- .open = isif_open,
- .close = isif_close,
- .enable = isif_enable,
- .enable_out_to_sdram = isif_enable_output_to_sdram,
- .set_hw_if_params = isif_set_hw_if_params,
- .configure = isif_configure,
- .set_buftype = isif_set_buftype,
- .get_buftype = isif_get_buftype,
- .enum_pix = isif_enum_pix,
- .set_pixel_format = isif_set_pixel_format,
- .get_pixel_format = isif_get_pixel_format,
- .set_frame_format = isif_set_frame_format,
- .get_frame_format = isif_get_frame_format,
- .set_image_window = isif_set_image_window,
- .get_image_window = isif_get_image_window,
- .get_line_length = isif_get_line_length,
- .setfbaddr = isif_setfbaddr,
- .getfid = isif_getfid,
- },
-};
-
-static int isif_probe(struct platform_device *pdev)
-{
- void (*setup_pinmux)(void);
- struct resource *res;
- void __iomem *addr;
- int status = 0, i;
-
- /* Platform data holds setup_pinmux function ptr */
- if (!pdev->dev.platform_data)
- return -ENODEV;
-
- /*
- * first try to register with vpfe. If not correct platform, then we
- * don't have to iomap
- */
- status = vpfe_register_ccdc_device(&isif_hw_dev);
- if (status < 0)
- return status;
-
- setup_pinmux = pdev->dev.platform_data;
- /*
- * setup Mux configuration for ccdc which may be different for
- * different SoCs using this CCDC
- */
- setup_pinmux();
-
- i = 0;
- /* Get the ISIF base address, linearization table0 and table1 addr. */
- while (i < 3) {
- res = platform_get_resource(pdev, IORESOURCE_MEM, i);
- if (!res) {
- status = -ENODEV;
- goto fail_nobase_res;
- }
- res = request_mem_region(res->start, resource_size(res),
- res->name);
- if (!res) {
- status = -EBUSY;
- goto fail_nobase_res;
- }
- addr = ioremap(res->start, resource_size(res));
- if (!addr) {
- status = -ENOMEM;
- goto fail_base_iomap;
- }
- switch (i) {
- case 0:
- /* ISIF base address */
- isif_cfg.base_addr = addr;
- break;
- case 1:
- /* ISIF linear tbl0 address */
- isif_cfg.linear_tbl0_addr = addr;
- break;
- default:
- /* ISIF linear tbl0 address */
- isif_cfg.linear_tbl1_addr = addr;
- break;
- }
- i++;
- }
- isif_cfg.dev = &pdev->dev;
-
- printk(KERN_NOTICE "%s is registered with vpfe.\n",
- isif_hw_dev.name);
- return 0;
-fail_base_iomap:
- release_mem_region(res->start, resource_size(res));
- i--;
-fail_nobase_res:
- if (isif_cfg.base_addr) {
- iounmap(isif_cfg.base_addr);
- isif_cfg.base_addr = NULL;
- }
- if (isif_cfg.linear_tbl0_addr) {
- iounmap(isif_cfg.linear_tbl0_addr);
- isif_cfg.linear_tbl0_addr = NULL;
- }
-
- while (i >= 0) {
- res = platform_get_resource(pdev, IORESOURCE_MEM, i);
- if (res)
- release_mem_region(res->start, resource_size(res));
- i--;
- }
- vpfe_unregister_ccdc_device(&isif_hw_dev);
- return status;
-}
-
-static int isif_remove(struct platform_device *pdev)
-{
- struct resource *res;
- int i = 0;
-
- iounmap(isif_cfg.base_addr);
- isif_cfg.base_addr = NULL;
- iounmap(isif_cfg.linear_tbl0_addr);
- isif_cfg.linear_tbl0_addr = NULL;
- iounmap(isif_cfg.linear_tbl1_addr);
- isif_cfg.linear_tbl1_addr = NULL;
- while (i < 3) {
- res = platform_get_resource(pdev, IORESOURCE_MEM, i);
- release_mem_region(res->start, resource_size(res));
- i++;
- }
- vpfe_unregister_ccdc_device(&isif_hw_dev);
- return 0;
-}
-
-static struct platform_driver isif_driver = {
- .driver = {
- .name = "isif",
- },
- .remove = isif_remove,
- .probe = isif_probe,
-};
-
-module_platform_driver(isif_driver);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/media/deprecated/vpfe_capture/isif.h b/drivers/staging/media/deprecated/vpfe_capture/isif.h
deleted file mode 100644
index 8369acd26e7e..000000000000
--- a/drivers/staging/media/deprecated/vpfe_capture/isif.h
+++ /dev/null
@@ -1,518 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2008-2009 Texas Instruments Inc
- *
- * isif header file
- */
-#ifndef _ISIF_H
-#define _ISIF_H
-
-#include <media/davinci/ccdc_types.h>
-#include <media/davinci/vpfe_types.h>
-
-/* isif float type S8Q8/U8Q8 */
-struct isif_float_8 {
- /* 8 bit integer part */
- __u8 integer;
- /* 8 bit decimal part */
- __u8 decimal;
-};
-
-/* isif float type U16Q16/S16Q16 */
-struct isif_float_16 {
- /* 16 bit integer part */
- __u16 integer;
- /* 16 bit decimal part */
- __u16 decimal;
-};
-
-/************************************************************************
- * Vertical Defect Correction parameters
- ***********************************************************************/
-/* Defect Correction (DFC) table entry */
-struct isif_vdfc_entry {
- /* vertical position of defect */
- __u16 pos_vert;
- /* horizontal position of defect */
- __u16 pos_horz;
- /*
- * Defect level of Vertical line defect position. This is subtracted
- * from the data at the defect position
- */
- __u8 level_at_pos;
- /*
- * Defect level of the pixels upper than the vertical line defect.
- * This is subtracted from the data
- */
- __u8 level_up_pixels;
- /*
- * Defect level of the pixels lower than the vertical line defect.
- * This is subtracted from the data
- */
- __u8 level_low_pixels;
-};
-
-#define ISIF_VDFC_TABLE_SIZE 8
-struct isif_dfc {
- /* enable vertical defect correction */
- __u8 en;
- /* Defect level subtraction. Just fed through if saturating */
-#define ISIF_VDFC_NORMAL 0
- /*
- * Defect level subtraction. Horizontal interpolation ((i-2)+(i+2))/2
- * if data saturating
- */
-#define ISIF_VDFC_HORZ_INTERPOL_IF_SAT 1
- /* Horizontal interpolation (((i-2)+(i+2))/2) */
-#define ISIF_VDFC_HORZ_INTERPOL 2
- /* one of the vertical defect correction modes above */
- __u8 corr_mode;
- /* 0 - whole line corrected, 1 - not pixels upper than the defect */
- __u8 corr_whole_line;
-#define ISIF_VDFC_NO_SHIFT 0
-#define ISIF_VDFC_SHIFT_1 1
-#define ISIF_VDFC_SHIFT_2 2
-#define ISIF_VDFC_SHIFT_3 3
-#define ISIF_VDFC_SHIFT_4 4
- /*
- * defect level shift value. level_at_pos, level_upper_pos,
- * and level_lower_pos can be shifted up by this value. Choose
- * one of the values above
- */
- __u8 def_level_shift;
- /* defect saturation level */
- __u16 def_sat_level;
- /* number of vertical defects. Max is ISIF_VDFC_TABLE_SIZE */
- __u16 num_vdefects;
- /* VDFC table ptr */
- struct isif_vdfc_entry table[ISIF_VDFC_TABLE_SIZE];
-};
-
-struct isif_horz_bclamp {
-
- /* Horizontal clamp disabled. Only vertical clamp value is subtracted */
-#define ISIF_HORZ_BC_DISABLE 0
- /*
- * Horizontal clamp value is calculated and subtracted from image data
- * along with vertical clamp value
- */
-#define ISIF_HORZ_BC_CLAMP_CALC_ENABLED 1
- /*
- * Horizontal clamp value calculated from previous image is subtracted
- * from image data along with vertical clamp value.
- */
-#define ISIF_HORZ_BC_CLAMP_NOT_UPDATED 2
- /* horizontal clamp mode. One of the values above */
- __u8 mode;
- /*
- * pixel value limit enable.
- * 0 - limit disabled
- * 1 - pixel value limited to 1023
- */
- __u8 clamp_pix_limit;
- /* Select Most left window for bc calculation */
-#define ISIF_SEL_MOST_LEFT_WIN 0
- /* Select Most right window for bc calculation */
-#define ISIF_SEL_MOST_RIGHT_WIN 1
- /* Select most left or right window for clamp val calculation */
- __u8 base_win_sel_calc;
- /* Window count per color for calculation. range 1-32 */
- __u8 win_count_calc;
- /* Window start position - horizontal for calculation. 0 - 8191 */
- __u16 win_start_h_calc;
- /* Window start position - vertical for calculation 0 - 8191 */
- __u16 win_start_v_calc;
-#define ISIF_HORZ_BC_SZ_H_2PIXELS 0
-#define ISIF_HORZ_BC_SZ_H_4PIXELS 1
-#define ISIF_HORZ_BC_SZ_H_8PIXELS 2
-#define ISIF_HORZ_BC_SZ_H_16PIXELS 3
- /* Width of the sample window in pixels for calculation */
- __u8 win_h_sz_calc;
-#define ISIF_HORZ_BC_SZ_V_32PIXELS 0
-#define ISIF_HORZ_BC_SZ_V_64PIXELS 1
-#define ISIF_HORZ_BC_SZ_V_128PIXELS 2
-#define ISIF_HORZ_BC_SZ_V_256PIXELS 3
- /* Height of the sample window in pixels for calculation */
- __u8 win_v_sz_calc;
-};
-
-/************************************************************************
- * Black Clamp parameters
- ***********************************************************************/
-struct isif_vert_bclamp {
- /* Reset value used is the clamp value calculated */
-#define ISIF_VERT_BC_USE_HORZ_CLAMP_VAL 0
- /* Reset value used is reset_clamp_val configured */
-#define ISIF_VERT_BC_USE_CONFIG_CLAMP_VAL 1
- /* No update, previous image value is used */
-#define ISIF_VERT_BC_NO_UPDATE 2
- /*
- * Reset value selector for vertical clamp calculation. Use one of
- * the above values
- */
- __u8 reset_val_sel;
- /* U8Q8. Line average coefficient used in vertical clamp calculation */
- __u8 line_ave_coef;
- /* Height of the optical black region for calculation */
- __u16 ob_v_sz_calc;
- /* Optical black region start position - horizontal. 0 - 8191 */
- __u16 ob_start_h;
- /* Optical black region start position - vertical 0 - 8191 */
- __u16 ob_start_v;
-};
-
-struct isif_black_clamp {
- /*
- * This offset value is added irrespective of the clamp enable status.
- * S13
- */
- __u16 dc_offset;
- /*
- * Enable black/digital clamp value to be subtracted from the image data
- */
- __u8 en;
- /*
- * black clamp mode. same/separate clamp for 4 colors
- * 0 - disable - same clamp value for all colors
- * 1 - clamp value calculated separately for all colors
- */
- __u8 bc_mode_color;
- /* Vertical start position for bc subtraction */
- __u16 vert_start_sub;
- /* Black clamp for horizontal direction */
- struct isif_horz_bclamp horz;
- /* Black clamp for vertical direction */
- struct isif_vert_bclamp vert;
-};
-
-/*************************************************************************
-** Color Space Conversion (CSC)
-*************************************************************************/
-#define ISIF_CSC_NUM_COEFF 16
-struct isif_color_space_conv {
- /* Enable color space conversion */
- __u8 en;
- /*
- * csc coefficient table. S8Q5, M00 at index 0, M01 at index 1, and
- * so forth
- */
- struct isif_float_8 coeff[ISIF_CSC_NUM_COEFF];
-};
-
-
-/*************************************************************************
-** Black Compensation parameters
-*************************************************************************/
-struct isif_black_comp {
- /* Comp for Red */
- __s8 r_comp;
- /* Comp for Gr */
- __s8 gr_comp;
- /* Comp for Blue */
- __s8 b_comp;
- /* Comp for Gb */
- __s8 gb_comp;
-};
-
-/*************************************************************************
-** Gain parameters
-*************************************************************************/
-struct isif_gain {
- /* Gain for Red or ye */
- struct isif_float_16 r_ye;
- /* Gain for Gr or cy */
- struct isif_float_16 gr_cy;
- /* Gain for Gb or g */
- struct isif_float_16 gb_g;
- /* Gain for Blue or mg */
- struct isif_float_16 b_mg;
-};
-
-#define ISIF_LINEAR_TAB_SIZE 192
-/*************************************************************************
-** Linearization parameters
-*************************************************************************/
-struct isif_linearize {
- /* Enable or Disable linearization of data */
- __u8 en;
- /* Shift value applied */
- __u8 corr_shft;
- /* scale factor applied U11Q10 */
- struct isif_float_16 scale_fact;
- /* Size of the linear table */
- __u16 table[ISIF_LINEAR_TAB_SIZE];
-};
-
-/* Color patterns */
-#define ISIF_RED 0
-#define ISIF_GREEN_RED 1
-#define ISIF_GREEN_BLUE 2
-#define ISIF_BLUE 3
-struct isif_col_pat {
- __u8 olop;
- __u8 olep;
- __u8 elop;
- __u8 elep;
-};
-
-/*************************************************************************
-** Data formatter parameters
-*************************************************************************/
-struct isif_fmtplen {
- /*
- * number of program entries for SET0, range 1 - 16
- * when fmtmode is ISIF_SPLIT, 1 - 8 when fmtmode is
- * ISIF_COMBINE
- */
- __u16 plen0;
- /*
- * number of program entries for SET1, range 1 - 16
- * when fmtmode is ISIF_SPLIT, 1 - 8 when fmtmode is
- * ISIF_COMBINE
- */
- __u16 plen1;
- /**
- * number of program entries for SET2, range 1 - 16
- * when fmtmode is ISIF_SPLIT, 1 - 8 when fmtmode is
- * ISIF_COMBINE
- */
- __u16 plen2;
- /**
- * number of program entries for SET3, range 1 - 16
- * when fmtmode is ISIF_SPLIT, 1 - 8 when fmtmode is
- * ISIF_COMBINE
- */
- __u16 plen3;
-};
-
-struct isif_fmt_cfg {
-#define ISIF_SPLIT 0
-#define ISIF_COMBINE 1
- /* Split or combine or line alternate */
- __u8 fmtmode;
- /* enable or disable line alternating mode */
- __u8 ln_alter_en;
-#define ISIF_1LINE 0
-#define ISIF_2LINES 1
-#define ISIF_3LINES 2
-#define ISIF_4LINES 3
- /* Split/combine line number */
- __u8 lnum;
- /* Address increment Range 1 - 16 */
- __u8 addrinc;
-};
-
-struct isif_fmt_addr_ptr {
- /* Initial address */
- __u32 init_addr;
- /* output line number */
-#define ISIF_1STLINE 0
-#define ISIF_2NDLINE 1
-#define ISIF_3RDLINE 2
-#define ISIF_4THLINE 3
- __u8 out_line;
-};
-
-struct isif_fmtpgm_ap {
- /* program address pointer */
- __u8 pgm_aptr;
- /* program address increment or decrement */
- __u8 pgmupdt;
-};
-
-struct isif_data_formatter {
- /* Enable/Disable data formatter */
- __u8 en;
- /* data formatter configuration */
- struct isif_fmt_cfg cfg;
- /* Formatter program entries length */
- struct isif_fmtplen plen;
- /* first pixel in a line fed to formatter */
- __u16 fmtrlen;
- /* HD interval for output line. Only valid when split line */
- __u16 fmthcnt;
- /* formatter address pointers */
- struct isif_fmt_addr_ptr fmtaddr_ptr[16];
- /* program enable/disable */
- __u8 pgm_en[32];
- /* program address pointers */
- struct isif_fmtpgm_ap fmtpgm_ap[32];
-};
-
-struct isif_df_csc {
- /* Color Space Conversion configuration, 0 - csc, 1 - df */
- __u8 df_or_csc;
- /* csc configuration valid if df_or_csc is 0 */
- struct isif_color_space_conv csc;
- /* data formatter configuration valid if df_or_csc is 1 */
- struct isif_data_formatter df;
- /* start pixel in a line at the input */
- __u32 start_pix;
- /* number of pixels in input line */
- __u32 num_pixels;
- /* start line at the input */
- __u32 start_line;
- /* number of lines at the input */
- __u32 num_lines;
-};
-
-struct isif_gain_offsets_adj {
- /* Gain adjustment per color */
- struct isif_gain gain;
- /* Offset adjustment */
- __u16 offset;
- /* Enable or Disable Gain adjustment for SDRAM data */
- __u8 gain_sdram_en;
- /* Enable or Disable Gain adjustment for IPIPE data */
- __u8 gain_ipipe_en;
- /* Enable or Disable Gain adjustment for H3A data */
- __u8 gain_h3a_en;
- /* Enable or Disable Gain adjustment for SDRAM data */
- __u8 offset_sdram_en;
- /* Enable or Disable Gain adjustment for IPIPE data */
- __u8 offset_ipipe_en;
- /* Enable or Disable Gain adjustment for H3A data */
- __u8 offset_h3a_en;
-};
-
-struct isif_cul {
- /* Horizontal Cull pattern for odd lines */
- __u8 hcpat_odd;
- /* Horizontal Cull pattern for even lines */
- __u8 hcpat_even;
- /* Vertical Cull pattern */
- __u8 vcpat;
- /* Enable or disable lpf. Apply when cull is enabled */
- __u8 en_lpf;
-};
-
-struct isif_compress {
-#define ISIF_ALAW 0
-#define ISIF_DPCM 1
-#define ISIF_NO_COMPRESSION 2
- /* Compression Algorithm used */
- __u8 alg;
- /* Choose Predictor1 for DPCM compression */
-#define ISIF_DPCM_PRED1 0
- /* Choose Predictor2 for DPCM compression */
-#define ISIF_DPCM_PRED2 1
- /* Predictor for DPCM compression */
- __u8 pred;
-};
-
-/* all the stuff in this struct will be provided by userland */
-struct isif_config_params_raw {
- /* Linearization parameters for image sensor data input */
- struct isif_linearize linearize;
- /* Data formatter or CSC */
- struct isif_df_csc df_csc;
- /* Defect Pixel Correction (DFC) configuration */
- struct isif_dfc dfc;
- /* Black/Digital Clamp configuration */
- struct isif_black_clamp bclamp;
- /* Gain, offset adjustments */
- struct isif_gain_offsets_adj gain_offset;
- /* Culling */
- struct isif_cul culling;
- /* A-Law and DPCM compression options */
- struct isif_compress compress;
- /* horizontal offset for Gain/LSC/DFC */
- __u16 horz_offset;
- /* vertical offset for Gain/LSC/DFC */
- __u16 vert_offset;
- /* color pattern for field 0 */
- struct isif_col_pat col_pat_field0;
- /* color pattern for field 1 */
- struct isif_col_pat col_pat_field1;
-#define ISIF_NO_SHIFT 0
-#define ISIF_1BIT_SHIFT 1
-#define ISIF_2BIT_SHIFT 2
-#define ISIF_3BIT_SHIFT 3
-#define ISIF_4BIT_SHIFT 4
-#define ISIF_5BIT_SHIFT 5
-#define ISIF_6BIT_SHIFT 6
- /* Data shift applied before storing to SDRAM */
- __u8 data_shift;
- /* enable input test pattern generation */
- __u8 test_pat_gen;
-};
-
-#ifdef __KERNEL__
-struct isif_ycbcr_config {
- /* isif pixel format */
- enum ccdc_pixfmt pix_fmt;
- /* isif frame format */
- enum ccdc_frmfmt frm_fmt;
- /* ISIF crop window */
- struct v4l2_rect win;
- /* field polarity */
- enum vpfe_pin_pol fid_pol;
- /* interface VD polarity */
- enum vpfe_pin_pol vd_pol;
- /* interface HD polarity */
- enum vpfe_pin_pol hd_pol;
- /* isif pix order. Only used for ycbcr capture */
- enum ccdc_pixorder pix_order;
- /* isif buffer type. Only used for ycbcr capture */
- enum ccdc_buftype buf_type;
-};
-
-/* MSB of image data connected to sensor port */
-enum isif_data_msb {
- ISIF_BIT_MSB_15,
- ISIF_BIT_MSB_14,
- ISIF_BIT_MSB_13,
- ISIF_BIT_MSB_12,
- ISIF_BIT_MSB_11,
- ISIF_BIT_MSB_10,
- ISIF_BIT_MSB_9,
- ISIF_BIT_MSB_8,
- ISIF_BIT_MSB_7
-};
-
-enum isif_cfa_pattern {
- ISIF_CFA_PAT_MOSAIC,
- ISIF_CFA_PAT_STRIPE
-};
-
-struct isif_params_raw {
- /* isif pixel format */
- enum ccdc_pixfmt pix_fmt;
- /* isif frame format */
- enum ccdc_frmfmt frm_fmt;
- /* video window */
- struct v4l2_rect win;
- /* field polarity */
- enum vpfe_pin_pol fid_pol;
- /* interface VD polarity */
- enum vpfe_pin_pol vd_pol;
- /* interface HD polarity */
- enum vpfe_pin_pol hd_pol;
- /* buffer type. Applicable for interlaced mode */
- enum ccdc_buftype buf_type;
- /* Gain values */
- struct isif_gain gain;
- /* cfa pattern */
- enum isif_cfa_pattern cfa_pat;
- /* Data MSB position */
- enum isif_data_msb data_msb;
- /* Enable horizontal flip */
- unsigned char horz_flip_en;
- /* Enable image invert vertically */
- unsigned char image_invert_en;
-
- /* all the userland defined stuff*/
- struct isif_config_params_raw config_params;
-};
-
-enum isif_data_pack {
- ISIF_PACK_16BIT,
- ISIF_PACK_12BIT,
- ISIF_PACK_8BIT
-};
-
-#define ISIF_WIN_NTSC {0, 0, 720, 480}
-#define ISIF_WIN_VGA {0, 0, 640, 480}
-
-#endif
-#endif
diff --git a/drivers/staging/media/deprecated/vpfe_capture/isif_regs.h b/drivers/staging/media/deprecated/vpfe_capture/isif_regs.h
deleted file mode 100644
index d68d38841ae7..000000000000
--- a/drivers/staging/media/deprecated/vpfe_capture/isif_regs.h
+++ /dev/null
@@ -1,256 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2008-2009 Texas Instruments Inc
- */
-#ifndef _ISIF_REGS_H
-#define _ISIF_REGS_H
-
-/* ISIF registers relative offsets */
-#define SYNCEN 0x00
-#define MODESET 0x04
-#define HDW 0x08
-#define VDW 0x0c
-#define PPLN 0x10
-#define LPFR 0x14
-#define SPH 0x18
-#define LNH 0x1c
-#define SLV0 0x20
-#define SLV1 0x24
-#define LNV 0x28
-#define CULH 0x2c
-#define CULV 0x30
-#define HSIZE 0x34
-#define SDOFST 0x38
-#define CADU 0x3c
-#define CADL 0x40
-#define LINCFG0 0x44
-#define LINCFG1 0x48
-#define CCOLP 0x4c
-#define CRGAIN 0x50
-#define CGRGAIN 0x54
-#define CGBGAIN 0x58
-#define CBGAIN 0x5c
-#define COFSTA 0x60
-#define FLSHCFG0 0x64
-#define FLSHCFG1 0x68
-#define FLSHCFG2 0x6c
-#define VDINT0 0x70
-#define VDINT1 0x74
-#define VDINT2 0x78
-#define MISC 0x7c
-#define CGAMMAWD 0x80
-#define REC656IF 0x84
-#define CCDCFG 0x88
-/*****************************************************
-* Defect Correction registers
-*****************************************************/
-#define DFCCTL 0x8c
-#define VDFSATLV 0x90
-#define DFCMEMCTL 0x94
-#define DFCMEM0 0x98
-#define DFCMEM1 0x9c
-#define DFCMEM2 0xa0
-#define DFCMEM3 0xa4
-#define DFCMEM4 0xa8
-/****************************************************
-* Black Clamp registers
-****************************************************/
-#define CLAMPCFG 0xac
-#define CLDCOFST 0xb0
-#define CLSV 0xb4
-#define CLHWIN0 0xb8
-#define CLHWIN1 0xbc
-#define CLHWIN2 0xc0
-#define CLVRV 0xc4
-#define CLVWIN0 0xc8
-#define CLVWIN1 0xcc
-#define CLVWIN2 0xd0
-#define CLVWIN3 0xd4
-/****************************************************
-* Lense Shading Correction
-****************************************************/
-#define DATAHOFST 0xd8
-#define DATAVOFST 0xdc
-#define LSCHVAL 0xe0
-#define LSCVVAL 0xe4
-#define TWODLSCCFG 0xe8
-#define TWODLSCOFST 0xec
-#define TWODLSCINI 0xf0
-#define TWODLSCGRBU 0xf4
-#define TWODLSCGRBL 0xf8
-#define TWODLSCGROF 0xfc
-#define TWODLSCORBU 0x100
-#define TWODLSCORBL 0x104
-#define TWODLSCOROF 0x108
-#define TWODLSCIRQEN 0x10c
-#define TWODLSCIRQST 0x110
-/****************************************************
-* Data formatter
-****************************************************/
-#define FMTCFG 0x114
-#define FMTPLEN 0x118
-#define FMTSPH 0x11c
-#define FMTLNH 0x120
-#define FMTSLV 0x124
-#define FMTLNV 0x128
-#define FMTRLEN 0x12c
-#define FMTHCNT 0x130
-#define FMTAPTR_BASE 0x134
-/* Below macro for addresses FMTAPTR0 - FMTAPTR15 */
-#define FMTAPTR(i) (FMTAPTR_BASE + (i * 4))
-#define FMTPGMVF0 0x174
-#define FMTPGMVF1 0x178
-#define FMTPGMAPU0 0x17c
-#define FMTPGMAPU1 0x180
-#define FMTPGMAPS0 0x184
-#define FMTPGMAPS1 0x188
-#define FMTPGMAPS2 0x18c
-#define FMTPGMAPS3 0x190
-#define FMTPGMAPS4 0x194
-#define FMTPGMAPS5 0x198
-#define FMTPGMAPS6 0x19c
-#define FMTPGMAPS7 0x1a0
-/************************************************
-* Color Space Converter
-************************************************/
-#define CSCCTL 0x1a4
-#define CSCM0 0x1a8
-#define CSCM1 0x1ac
-#define CSCM2 0x1b0
-#define CSCM3 0x1b4
-#define CSCM4 0x1b8
-#define CSCM5 0x1bc
-#define CSCM6 0x1c0
-#define CSCM7 0x1c4
-#define OBWIN0 0x1c8
-#define OBWIN1 0x1cc
-#define OBWIN2 0x1d0
-#define OBWIN3 0x1d4
-#define OBVAL0 0x1d8
-#define OBVAL1 0x1dc
-#define OBVAL2 0x1e0
-#define OBVAL3 0x1e4
-#define OBVAL4 0x1e8
-#define OBVAL5 0x1ec
-#define OBVAL6 0x1f0
-#define OBVAL7 0x1f4
-#define CLKCTL 0x1f8
-
-/* Masks & Shifts below */
-#define START_PX_HOR_MASK 0x7FFF
-#define NUM_PX_HOR_MASK 0x7FFF
-#define START_VER_ONE_MASK 0x7FFF
-#define START_VER_TWO_MASK 0x7FFF
-#define NUM_LINES_VER 0x7FFF
-
-/* gain - offset masks */
-#define GAIN_INTEGER_SHIFT 9
-#define OFFSET_MASK 0xFFF
-#define GAIN_SDRAM_EN_SHIFT 12
-#define GAIN_IPIPE_EN_SHIFT 13
-#define GAIN_H3A_EN_SHIFT 14
-#define OFST_SDRAM_EN_SHIFT 8
-#define OFST_IPIPE_EN_SHIFT 9
-#define OFST_H3A_EN_SHIFT 10
-#define GAIN_OFFSET_EN_MASK 0x7700
-
-/* Culling */
-#define CULL_PAT_EVEN_LINE_SHIFT 8
-
-/* CCDCFG register */
-#define ISIF_YCINSWP_RAW (0x00 << 4)
-#define ISIF_YCINSWP_YCBCR (0x01 << 4)
-#define ISIF_CCDCFG_FIDMD_LATCH_VSYNC (0x00 << 6)
-#define ISIF_CCDCFG_WENLOG_AND (0x00 << 8)
-#define ISIF_CCDCFG_TRGSEL_WEN (0x00 << 9)
-#define ISIF_CCDCFG_EXTRG_DISABLE (0x00 << 10)
-#define ISIF_LATCH_ON_VSYNC_DISABLE (0x01 << 15)
-#define ISIF_LATCH_ON_VSYNC_ENABLE (0x00 << 15)
-#define ISIF_DATA_PACK_MASK 3
-#define ISIF_DATA_PACK16 0
-#define ISIF_DATA_PACK12 1
-#define ISIF_DATA_PACK8 2
-#define ISIF_PIX_ORDER_SHIFT 11
-#define ISIF_BW656_ENABLE (0x01 << 5)
-
-/* MODESET registers */
-#define ISIF_VDHDOUT_INPUT (0x00 << 0)
-#define ISIF_INPUT_SHIFT 12
-#define ISIF_RAW_INPUT_MODE 0
-#define ISIF_FID_POL_SHIFT 4
-#define ISIF_HD_POL_SHIFT 3
-#define ISIF_VD_POL_SHIFT 2
-#define ISIF_DATAPOL_NORMAL 0
-#define ISIF_DATAPOL_SHIFT 6
-#define ISIF_EXWEN_DISABLE 0
-#define ISIF_EXWEN_SHIFT 5
-#define ISIF_FRM_FMT_SHIFT 7
-#define ISIF_DATASFT_SHIFT 8
-#define ISIF_LPF_SHIFT 14
-#define ISIF_LPF_MASK 1
-
-/* GAMMAWD registers */
-#define ISIF_ALAW_GAMMA_WD_MASK 0xF
-#define ISIF_ALAW_GAMMA_WD_SHIFT 1
-#define ISIF_ALAW_ENABLE 1
-#define ISIF_GAMMAWD_CFA_SHIFT 5
-
-/* HSIZE registers */
-#define ISIF_HSIZE_FLIP_MASK 1
-#define ISIF_HSIZE_FLIP_SHIFT 12
-
-/* MISC registers */
-#define ISIF_DPCM_EN_SHIFT 12
-#define ISIF_DPCM_PREDICTOR_SHIFT 13
-
-/* Black clamp related */
-#define ISIF_BC_MODE_COLOR_SHIFT 4
-#define ISIF_HORZ_BC_MODE_SHIFT 1
-#define ISIF_HORZ_BC_WIN_SEL_SHIFT 5
-#define ISIF_HORZ_BC_PIX_LIMIT_SHIFT 6
-#define ISIF_HORZ_BC_WIN_H_SIZE_SHIFT 8
-#define ISIF_HORZ_BC_WIN_V_SIZE_SHIFT 12
-#define ISIF_VERT_BC_RST_VAL_SEL_SHIFT 4
-#define ISIF_VERT_BC_LINE_AVE_COEF_SHIFT 8
-
-/* VDFC registers */
-#define ISIF_VDFC_EN_SHIFT 4
-#define ISIF_VDFC_CORR_MOD_SHIFT 5
-#define ISIF_VDFC_CORR_WHOLE_LN_SHIFT 7
-#define ISIF_VDFC_LEVEL_SHFT_SHIFT 8
-#define ISIF_VDFC_POS_MASK 0x1FFF
-#define ISIF_DFCMEMCTL_DFCMARST_SHIFT 2
-
-/* CSC registers */
-#define ISIF_CSC_COEF_INTEG_MASK 7
-#define ISIF_CSC_COEF_DECIMAL_MASK 0x1f
-#define ISIF_CSC_COEF_INTEG_SHIFT 5
-#define ISIF_CSCM_MSB_SHIFT 8
-#define ISIF_DF_CSC_SPH_MASK 0x1FFF
-#define ISIF_DF_CSC_LNH_MASK 0x1FFF
-#define ISIF_DF_CSC_SLV_MASK 0x1FFF
-#define ISIF_DF_CSC_LNV_MASK 0x1FFF
-#define ISIF_DF_NUMLINES 0x7FFF
-#define ISIF_DF_NUMPIX 0x1FFF
-
-/* Offsets for LSC/DFC/Gain */
-#define ISIF_DATA_H_OFFSET_MASK 0x1FFF
-#define ISIF_DATA_V_OFFSET_MASK 0x1FFF
-
-/* Linearization */
-#define ISIF_LIN_CORRSFT_SHIFT 4
-#define ISIF_LIN_SCALE_FACT_INTEG_SHIFT 10
-
-
-/* Pattern registers */
-#define ISIF_PG_EN (1 << 3)
-#define ISIF_SEL_PG_SRC (3 << 4)
-#define ISIF_PG_VD_POL_SHIFT 0
-#define ISIF_PG_HD_POL_SHIFT 1
-
-/*random other junk*/
-#define ISIF_SYNCEN_VDHDEN_MASK (1 << 0)
-#define ISIF_SYNCEN_WEN_MASK (1 << 1)
-#define ISIF_SYNCEN_WEN_SHIFT 1
-
-#endif
diff --git a/drivers/staging/media/deprecated/vpfe_capture/vpfe_capture.c b/drivers/staging/media/deprecated/vpfe_capture/vpfe_capture.c
deleted file mode 100644
index 0a2226b321d7..000000000000
--- a/drivers/staging/media/deprecated/vpfe_capture/vpfe_capture.c
+++ /dev/null
@@ -1,1902 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2008-2009 Texas Instruments Inc
- *
- * Driver name : VPFE Capture driver
- * VPFE Capture driver allows applications to capture and stream video
- * frames on DaVinci SoCs (DM6446, DM355 etc) from a YUV source such as
- * TVP5146 or Raw Bayer RGB image data from an image sensor
- * such as Microns' MT9T001, MT9T031 etc.
- *
- * These SoCs have, in common, a Video Processing Subsystem (VPSS) that
- * consists of a Video Processing Front End (VPFE) for capturing
- * video/raw image data and Video Processing Back End (VPBE) for displaying
- * YUV data through an in-built analog encoder or Digital LCD port. This
- * driver is for capture through VPFE. A typical EVM using these SoCs have
- * following high level configuration.
- *
- * decoder(TVP5146/ YUV/
- * MT9T001) --> Raw Bayer RGB ---> MUX -> VPFE (CCDC/ISIF)
- * data input | |
- * V |
- * SDRAM |
- * V
- * Image Processor
- * |
- * V
- * SDRAM
- * The data flow happens from a decoder connected to the VPFE over a
- * YUV embedded (BT.656/BT.1120) or separate sync or raw bayer rgb interface
- * and to the input of VPFE through an optional MUX (if more inputs are
- * to be interfaced on the EVM). The input data is first passed through
- * CCDC (CCD Controller, a.k.a Image Sensor Interface, ISIF). The CCDC
- * does very little or no processing on YUV data and does pre-process Raw
- * Bayer RGB data through modules such as Defect Pixel Correction (DFC)
- * Color Space Conversion (CSC), data gain/offset etc. After this, data
- * can be written to SDRAM or can be connected to the image processing
- * block such as IPIPE (on DM355 only).
- *
- * Features supported
- * - MMAP IO
- * - Capture using TVP5146 over BT.656
- * - support for interfacing decoders using sub device model
- * - Work with DM355 or DM6446 CCDC to do Raw Bayer RGB/YUV
- * data capture to SDRAM.
- * TODO list
- * - Support multiple REQBUF after open
- * - Support for de-allocating buffers through REQBUF
- * - Support for Raw Bayer RGB capture
- * - Support for chaining Image Processor
- * - Support for static allocation of buffers
- * - Support for USERPTR IO
- * - Support for STREAMON before QBUF
- * - Support for control ioctls
- */
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <media/v4l2-common.h>
-#include <linux/io.h>
-#include <media/davinci/vpfe_capture.h>
-#include "ccdc_hw_device.h"
-
-static int debug;
-static u32 numbuffers = 3;
-static u32 bufsize = (720 * 576 * 2);
-
-module_param(numbuffers, uint, S_IRUGO);
-module_param(bufsize, uint, S_IRUGO);
-module_param(debug, int, 0644);
-
-MODULE_PARM_DESC(numbuffers, "buffer count (default:3)");
-MODULE_PARM_DESC(bufsize, "buffer size in bytes (default:720 x 576 x 2)");
-MODULE_PARM_DESC(debug, "Debug level 0-1");
-
-MODULE_DESCRIPTION("VPFE Video for Linux Capture Driver");
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Texas Instruments");
-
-/* standard information */
-struct vpfe_standard {
- v4l2_std_id std_id;
- unsigned int width;
- unsigned int height;
- struct v4l2_fract pixelaspect;
- /* 0 - progressive, 1 - interlaced */
- int frame_format;
-};
-
-/* ccdc configuration */
-struct ccdc_config {
- /* This make sure vpfe is probed and ready to go */
- int vpfe_probed;
- /* name of ccdc device */
- char name[32];
-};
-
-/* data structures */
-static struct vpfe_config_params config_params = {
- .min_numbuffers = 3,
- .numbuffers = 3,
- .min_bufsize = 720 * 480 * 2,
- .device_bufsize = 720 * 576 * 2,
-};
-
-/* ccdc device registered */
-static const struct ccdc_hw_device *ccdc_dev;
-/* lock for accessing ccdc information */
-static DEFINE_MUTEX(ccdc_lock);
-/* ccdc configuration */
-static struct ccdc_config *ccdc_cfg;
-
-static const struct vpfe_standard vpfe_standards[] = {
- {V4L2_STD_525_60, 720, 480, {11, 10}, 1},
- {V4L2_STD_625_50, 720, 576, {54, 59}, 1},
-};
-
-/* Used when raw Bayer image from ccdc is directly captured to SDRAM */
-static const struct vpfe_pixel_format vpfe_pix_fmts[] = {
- {
- .pixelformat = V4L2_PIX_FMT_SBGGR8,
- .bpp = 1,
- },
- {
- .pixelformat = V4L2_PIX_FMT_SBGGR16,
- .bpp = 2,
- },
- {
- .pixelformat = V4L2_PIX_FMT_SGRBG10DPCM8,
- .bpp = 1,
- },
- {
- .pixelformat = V4L2_PIX_FMT_UYVY,
- .bpp = 2,
- },
- {
- .pixelformat = V4L2_PIX_FMT_YUYV,
- .bpp = 2,
- },
- {
- .pixelformat = V4L2_PIX_FMT_NV12,
- .bpp = 1,
- },
-};
-
-/*
- * vpfe_lookup_pix_format()
- * lookup an entry in the vpfe pix format table based on pix_format
- */
-static const struct vpfe_pixel_format *vpfe_lookup_pix_format(u32 pix_format)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(vpfe_pix_fmts); i++) {
- if (pix_format == vpfe_pix_fmts[i].pixelformat)
- return &vpfe_pix_fmts[i];
- }
- return NULL;
-}
-
-/*
- * vpfe_register_ccdc_device. CCDC module calls this to
- * register with vpfe capture
- */
-int vpfe_register_ccdc_device(const struct ccdc_hw_device *dev)
-{
- int ret = 0;
- printk(KERN_NOTICE "vpfe_register_ccdc_device: %s\n", dev->name);
-
- if (!dev->hw_ops.open ||
- !dev->hw_ops.enable ||
- !dev->hw_ops.set_hw_if_params ||
- !dev->hw_ops.configure ||
- !dev->hw_ops.set_buftype ||
- !dev->hw_ops.get_buftype ||
- !dev->hw_ops.enum_pix ||
- !dev->hw_ops.set_frame_format ||
- !dev->hw_ops.get_frame_format ||
- !dev->hw_ops.get_pixel_format ||
- !dev->hw_ops.set_pixel_format ||
- !dev->hw_ops.set_image_window ||
- !dev->hw_ops.get_image_window ||
- !dev->hw_ops.get_line_length ||
- !dev->hw_ops.getfid)
- return -EINVAL;
-
- mutex_lock(&ccdc_lock);
- if (!ccdc_cfg) {
- /*
- * TODO. Will this ever happen? if so, we need to fix it.
- * Probably we need to add the request to a linked list and
- * walk through it during vpfe probe
- */
- printk(KERN_ERR "vpfe capture not initialized\n");
- ret = -EFAULT;
- goto unlock;
- }
-
- if (strcmp(dev->name, ccdc_cfg->name)) {
- /* ignore this ccdc */
- ret = -EINVAL;
- goto unlock;
- }
-
- if (ccdc_dev) {
- printk(KERN_ERR "ccdc already registered\n");
- ret = -EINVAL;
- goto unlock;
- }
-
- ccdc_dev = dev;
-unlock:
- mutex_unlock(&ccdc_lock);
- return ret;
-}
-EXPORT_SYMBOL(vpfe_register_ccdc_device);
-
-/*
- * vpfe_unregister_ccdc_device. CCDC module calls this to
- * unregister with vpfe capture
- */
-void vpfe_unregister_ccdc_device(const struct ccdc_hw_device *dev)
-{
- if (!dev) {
- printk(KERN_ERR "invalid ccdc device ptr\n");
- return;
- }
-
- printk(KERN_NOTICE "vpfe_unregister_ccdc_device, dev->name = %s\n",
- dev->name);
-
- if (strcmp(dev->name, ccdc_cfg->name)) {
- /* ignore this ccdc */
- return;
- }
-
- mutex_lock(&ccdc_lock);
- ccdc_dev = NULL;
- mutex_unlock(&ccdc_lock);
-}
-EXPORT_SYMBOL(vpfe_unregister_ccdc_device);
-
-/*
- * vpfe_config_ccdc_image_format()
- * For a pix format, configure ccdc to setup the capture
- */
-static int vpfe_config_ccdc_image_format(struct vpfe_device *vpfe_dev)
-{
- enum ccdc_frmfmt frm_fmt = CCDC_FRMFMT_INTERLACED;
- int ret = 0;
-
- if (ccdc_dev->hw_ops.set_pixel_format(
- vpfe_dev->fmt.fmt.pix.pixelformat) < 0) {
- v4l2_err(&vpfe_dev->v4l2_dev,
- "couldn't set pix format in ccdc\n");
- return -EINVAL;
- }
- /* configure the image window */
- ccdc_dev->hw_ops.set_image_window(&vpfe_dev->crop);
-
- switch (vpfe_dev->fmt.fmt.pix.field) {
- case V4L2_FIELD_INTERLACED:
- /* do nothing, since it is default */
- ret = ccdc_dev->hw_ops.set_buftype(
- CCDC_BUFTYPE_FLD_INTERLEAVED);
- break;
- case V4L2_FIELD_NONE:
- frm_fmt = CCDC_FRMFMT_PROGRESSIVE;
- /* buffer type only applicable for interlaced scan */
- break;
- case V4L2_FIELD_SEQ_TB:
- ret = ccdc_dev->hw_ops.set_buftype(
- CCDC_BUFTYPE_FLD_SEPARATED);
- break;
- default:
- return -EINVAL;
- }
-
- /* set the frame format */
- if (!ret)
- ret = ccdc_dev->hw_ops.set_frame_format(frm_fmt);
- return ret;
-}
-/*
- * vpfe_config_image_format()
- * For a given standard, this functions sets up the default
- * pix format & crop values in the vpfe device and ccdc. It first
- * starts with defaults based values from the standard table.
- * It then checks if sub device supports get_fmt and then override the
- * values based on that.Sets crop values to match with scan resolution
- * starting at 0,0. It calls vpfe_config_ccdc_image_format() set the
- * values in ccdc
- */
-static int vpfe_config_image_format(struct vpfe_device *vpfe_dev,
- v4l2_std_id std_id)
-{
- struct vpfe_subdev_info *sdinfo = vpfe_dev->current_subdev;
- struct v4l2_subdev_format fmt = {
- .which = V4L2_SUBDEV_FORMAT_ACTIVE,
- };
- struct v4l2_mbus_framefmt *mbus_fmt = &fmt.format;
- struct v4l2_pix_format *pix = &vpfe_dev->fmt.fmt.pix;
- int i, ret;
-
- for (i = 0; i < ARRAY_SIZE(vpfe_standards); i++) {
- if (vpfe_standards[i].std_id & std_id) {
- vpfe_dev->std_info.active_pixels =
- vpfe_standards[i].width;
- vpfe_dev->std_info.active_lines =
- vpfe_standards[i].height;
- vpfe_dev->std_info.frame_format =
- vpfe_standards[i].frame_format;
- vpfe_dev->std_index = i;
- break;
- }
- }
-
- if (i == ARRAY_SIZE(vpfe_standards)) {
- v4l2_err(&vpfe_dev->v4l2_dev, "standard not supported\n");
- return -EINVAL;
- }
-
- vpfe_dev->crop.top = 0;
- vpfe_dev->crop.left = 0;
- vpfe_dev->crop.width = vpfe_dev->std_info.active_pixels;
- vpfe_dev->crop.height = vpfe_dev->std_info.active_lines;
- pix->width = vpfe_dev->crop.width;
- pix->height = vpfe_dev->crop.height;
-
- /* first field and frame format based on standard frame format */
- if (vpfe_dev->std_info.frame_format) {
- pix->field = V4L2_FIELD_INTERLACED;
- /* assume V4L2_PIX_FMT_UYVY as default */
- pix->pixelformat = V4L2_PIX_FMT_UYVY;
- v4l2_fill_mbus_format(mbus_fmt, pix,
- MEDIA_BUS_FMT_YUYV10_2X10);
- } else {
- pix->field = V4L2_FIELD_NONE;
- /* assume V4L2_PIX_FMT_SBGGR8 */
- pix->pixelformat = V4L2_PIX_FMT_SBGGR8;
- v4l2_fill_mbus_format(mbus_fmt, pix,
- MEDIA_BUS_FMT_SBGGR8_1X8);
- }
-
- /* if sub device supports get_fmt, override the defaults */
- ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev,
- sdinfo->grp_id, pad, get_fmt, NULL, &fmt);
-
- if (ret && ret != -ENOIOCTLCMD) {
- v4l2_err(&vpfe_dev->v4l2_dev,
- "error in getting get_fmt from sub device\n");
- return ret;
- }
- v4l2_fill_pix_format(pix, mbus_fmt);
- pix->bytesperline = pix->width * 2;
- pix->sizeimage = pix->bytesperline * pix->height;
-
- /* Sets the values in CCDC */
- ret = vpfe_config_ccdc_image_format(vpfe_dev);
- if (ret)
- return ret;
-
- /* Update the values of sizeimage and bytesperline */
- pix->bytesperline = ccdc_dev->hw_ops.get_line_length();
- pix->sizeimage = pix->bytesperline * pix->height;
-
- return 0;
-}
-
-static int vpfe_initialize_device(struct vpfe_device *vpfe_dev)
-{
- int ret;
-
- /* set first input of current subdevice as the current input */
- vpfe_dev->current_input = 0;
-
- /* set default standard */
- vpfe_dev->std_index = 0;
-
- /* Configure the default format information */
- ret = vpfe_config_image_format(vpfe_dev,
- vpfe_standards[vpfe_dev->std_index].std_id);
- if (ret)
- return ret;
-
- /* now open the ccdc device to initialize it */
- mutex_lock(&ccdc_lock);
- if (!ccdc_dev) {
- v4l2_err(&vpfe_dev->v4l2_dev, "ccdc device not registered\n");
- ret = -ENODEV;
- goto unlock;
- }
-
- if (!try_module_get(ccdc_dev->owner)) {
- v4l2_err(&vpfe_dev->v4l2_dev, "Couldn't lock ccdc module\n");
- ret = -ENODEV;
- goto unlock;
- }
- ret = ccdc_dev->hw_ops.open(vpfe_dev->pdev);
- if (!ret)
- vpfe_dev->initialized = 1;
-
- /* Clear all VPFE/CCDC interrupts */
- if (vpfe_dev->cfg->clr_intr)
- vpfe_dev->cfg->clr_intr(-1);
-
-unlock:
- mutex_unlock(&ccdc_lock);
- return ret;
-}
-
-/*
- * vpfe_open : It creates object of file handle structure and
- * stores it in private_data member of filepointer
- */
-static int vpfe_open(struct file *file)
-{
- struct vpfe_device *vpfe_dev = video_drvdata(file);
- struct video_device *vdev = video_devdata(file);
- struct vpfe_fh *fh;
-
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_open\n");
-
- if (!vpfe_dev->cfg->num_subdevs) {
- v4l2_err(&vpfe_dev->v4l2_dev, "No decoder registered\n");
- return -ENODEV;
- }
-
- /* Allocate memory for the file handle object */
- fh = kmalloc(sizeof(*fh), GFP_KERNEL);
- if (!fh)
- return -ENOMEM;
-
- /* store pointer to fh in private_data member of file */
- file->private_data = fh;
- fh->vpfe_dev = vpfe_dev;
- v4l2_fh_init(&fh->fh, vdev);
- mutex_lock(&vpfe_dev->lock);
- /* If decoder is not initialized. initialize it */
- if (!vpfe_dev->initialized) {
- if (vpfe_initialize_device(vpfe_dev)) {
- mutex_unlock(&vpfe_dev->lock);
- v4l2_fh_exit(&fh->fh);
- kfree(fh);
- return -ENODEV;
- }
- }
- /* Increment device usrs counter */
- vpfe_dev->usrs++;
- /* Set io_allowed member to false */
- fh->io_allowed = 0;
- v4l2_fh_add(&fh->fh);
- mutex_unlock(&vpfe_dev->lock);
- return 0;
-}
-
-static void vpfe_schedule_next_buffer(struct vpfe_device *vpfe_dev)
-{
- unsigned long addr;
-
- vpfe_dev->next_frm = list_entry(vpfe_dev->dma_queue.next,
- struct videobuf_buffer, queue);
- list_del(&vpfe_dev->next_frm->queue);
- vpfe_dev->next_frm->state = VIDEOBUF_ACTIVE;
- addr = videobuf_to_dma_contig(vpfe_dev->next_frm);
-
- ccdc_dev->hw_ops.setfbaddr(addr);
-}
-
-static void vpfe_schedule_bottom_field(struct vpfe_device *vpfe_dev)
-{
- unsigned long addr;
-
- addr = videobuf_to_dma_contig(vpfe_dev->cur_frm);
- addr += vpfe_dev->field_off;
- ccdc_dev->hw_ops.setfbaddr(addr);
-}
-
-static void vpfe_process_buffer_complete(struct vpfe_device *vpfe_dev)
-{
- vpfe_dev->cur_frm->ts = ktime_get_ns();
- vpfe_dev->cur_frm->state = VIDEOBUF_DONE;
- vpfe_dev->cur_frm->size = vpfe_dev->fmt.fmt.pix.sizeimage;
- wake_up_interruptible(&vpfe_dev->cur_frm->done);
- vpfe_dev->cur_frm = vpfe_dev->next_frm;
-}
-
-/* ISR for VINT0*/
-static irqreturn_t vpfe_isr(int irq, void *dev_id)
-{
- struct vpfe_device *vpfe_dev = dev_id;
- enum v4l2_field field;
- int fid;
-
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "\nStarting vpfe_isr...\n");
- field = vpfe_dev->fmt.fmt.pix.field;
-
- /* if streaming not started, don't do anything */
- if (!vpfe_dev->started)
- goto clear_intr;
-
- /* only for 6446 this will be applicable */
- if (ccdc_dev->hw_ops.reset)
- ccdc_dev->hw_ops.reset();
-
- if (field == V4L2_FIELD_NONE) {
- /* handle progressive frame capture */
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
- "frame format is progressive...\n");
- if (vpfe_dev->cur_frm != vpfe_dev->next_frm)
- vpfe_process_buffer_complete(vpfe_dev);
- goto clear_intr;
- }
-
- /* interlaced or TB capture check which field we are in hardware */
- fid = ccdc_dev->hw_ops.getfid();
-
- /* switch the software maintained field id */
- vpfe_dev->field_id ^= 1;
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "field id = %x:%x.\n",
- fid, vpfe_dev->field_id);
- if (fid == vpfe_dev->field_id) {
- /* we are in-sync here,continue */
- if (fid == 0) {
- /*
- * One frame is just being captured. If the next frame
- * is available, release the current frame and move on
- */
- if (vpfe_dev->cur_frm != vpfe_dev->next_frm)
- vpfe_process_buffer_complete(vpfe_dev);
- /*
- * based on whether the two fields are stored
- * interleavely or separately in memory, reconfigure
- * the CCDC memory address
- */
- if (field == V4L2_FIELD_SEQ_TB)
- vpfe_schedule_bottom_field(vpfe_dev);
- goto clear_intr;
- }
- /*
- * if one field is just being captured configure
- * the next frame get the next frame from the empty
- * queue if no frame is available hold on to the
- * current buffer
- */
- spin_lock(&vpfe_dev->dma_queue_lock);
- if (!list_empty(&vpfe_dev->dma_queue) &&
- vpfe_dev->cur_frm == vpfe_dev->next_frm)
- vpfe_schedule_next_buffer(vpfe_dev);
- spin_unlock(&vpfe_dev->dma_queue_lock);
- } else if (fid == 0) {
- /*
- * out of sync. Recover from any hardware out-of-sync.
- * May loose one frame
- */
- vpfe_dev->field_id = fid;
- }
-clear_intr:
- if (vpfe_dev->cfg->clr_intr)
- vpfe_dev->cfg->clr_intr(irq);
-
- return IRQ_HANDLED;
-}
-
-/* vdint1_isr - isr handler for VINT1 interrupt */
-static irqreturn_t vdint1_isr(int irq, void *dev_id)
-{
- struct vpfe_device *vpfe_dev = dev_id;
-
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "\nInside vdint1_isr...\n");
-
- /* if streaming not started, don't do anything */
- if (!vpfe_dev->started) {
- if (vpfe_dev->cfg->clr_intr)
- vpfe_dev->cfg->clr_intr(irq);
- return IRQ_HANDLED;
- }
-
- spin_lock(&vpfe_dev->dma_queue_lock);
- if ((vpfe_dev->fmt.fmt.pix.field == V4L2_FIELD_NONE) &&
- !list_empty(&vpfe_dev->dma_queue) &&
- vpfe_dev->cur_frm == vpfe_dev->next_frm)
- vpfe_schedule_next_buffer(vpfe_dev);
- spin_unlock(&vpfe_dev->dma_queue_lock);
-
- if (vpfe_dev->cfg->clr_intr)
- vpfe_dev->cfg->clr_intr(irq);
-
- return IRQ_HANDLED;
-}
-
-static void vpfe_detach_irq(struct vpfe_device *vpfe_dev)
-{
- enum ccdc_frmfmt frame_format;
-
- frame_format = ccdc_dev->hw_ops.get_frame_format();
- if (frame_format == CCDC_FRMFMT_PROGRESSIVE)
- free_irq(vpfe_dev->ccdc_irq1, vpfe_dev);
-}
-
-static int vpfe_attach_irq(struct vpfe_device *vpfe_dev)
-{
- enum ccdc_frmfmt frame_format;
-
- frame_format = ccdc_dev->hw_ops.get_frame_format();
- if (frame_format == CCDC_FRMFMT_PROGRESSIVE) {
- return request_irq(vpfe_dev->ccdc_irq1, vdint1_isr,
- 0, "vpfe_capture1",
- vpfe_dev);
- }
- return 0;
-}
-
-/* vpfe_stop_ccdc_capture: stop streaming in ccdc/isif */
-static void vpfe_stop_ccdc_capture(struct vpfe_device *vpfe_dev)
-{
- vpfe_dev->started = 0;
- ccdc_dev->hw_ops.enable(0);
- if (ccdc_dev->hw_ops.enable_out_to_sdram)
- ccdc_dev->hw_ops.enable_out_to_sdram(0);
-}
-
-/*
- * vpfe_release : This function deletes buffer queue, frees the
- * buffers and the vpfe file handle
- */
-static int vpfe_release(struct file *file)
-{
- struct vpfe_device *vpfe_dev = video_drvdata(file);
- struct vpfe_fh *fh = file->private_data;
- struct vpfe_subdev_info *sdinfo;
- int ret;
-
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_release\n");
-
- /* Get the device lock */
- mutex_lock(&vpfe_dev->lock);
- /* if this instance is doing IO */
- if (fh->io_allowed) {
- if (vpfe_dev->started) {
- sdinfo = vpfe_dev->current_subdev;
- ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev,
- sdinfo->grp_id,
- video, s_stream, 0);
- if (ret && (ret != -ENOIOCTLCMD))
- v4l2_err(&vpfe_dev->v4l2_dev,
- "stream off failed in subdev\n");
- vpfe_stop_ccdc_capture(vpfe_dev);
- vpfe_detach_irq(vpfe_dev);
- videobuf_streamoff(&vpfe_dev->buffer_queue);
- }
- vpfe_dev->io_usrs = 0;
- vpfe_dev->numbuffers = config_params.numbuffers;
- videobuf_stop(&vpfe_dev->buffer_queue);
- videobuf_mmap_free(&vpfe_dev->buffer_queue);
- }
-
- /* Decrement device usrs counter */
- vpfe_dev->usrs--;
- v4l2_fh_del(&fh->fh);
- v4l2_fh_exit(&fh->fh);
- /* If this is the last file handle */
- if (!vpfe_dev->usrs) {
- vpfe_dev->initialized = 0;
- if (ccdc_dev->hw_ops.close)
- ccdc_dev->hw_ops.close(vpfe_dev->pdev);
- module_put(ccdc_dev->owner);
- }
- mutex_unlock(&vpfe_dev->lock);
- file->private_data = NULL;
- /* Free memory allocated to file handle object */
- kfree(fh);
- return 0;
-}
-
-/*
- * vpfe_mmap : It is used to map kernel space buffers
- * into user spaces
- */
-static int vpfe_mmap(struct file *file, struct vm_area_struct *vma)
-{
- /* Get the device object and file handle object */
- struct vpfe_device *vpfe_dev = video_drvdata(file);
-
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_mmap\n");
-
- return videobuf_mmap_mapper(&vpfe_dev->buffer_queue, vma);
-}
-
-/*
- * vpfe_poll: It is used for select/poll system call
- */
-static __poll_t vpfe_poll(struct file *file, poll_table *wait)
-{
- struct vpfe_device *vpfe_dev = video_drvdata(file);
-
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_poll\n");
-
- if (vpfe_dev->started)
- return videobuf_poll_stream(file,
- &vpfe_dev->buffer_queue, wait);
- return 0;
-}
-
-/* vpfe capture driver file operations */
-static const struct v4l2_file_operations vpfe_fops = {
- .owner = THIS_MODULE,
- .open = vpfe_open,
- .release = vpfe_release,
- .unlocked_ioctl = video_ioctl2,
- .mmap = vpfe_mmap,
- .poll = vpfe_poll
-};
-
-/*
- * vpfe_check_format()
- * This function adjust the input pixel format as per hardware
- * capabilities and update the same in pixfmt.
- * Following algorithm used :-
- *
- * If given pixformat is not in the vpfe list of pix formats or not
- * supported by the hardware, current value of pixformat in the device
- * is used
- * If given field is not supported, then current field is used. If field
- * is different from current, then it is matched with that from sub device.
- * Minimum height is 2 lines for interlaced or tb field and 1 line for
- * progressive. Maximum height is clamped to active active lines of scan
- * Minimum width is 32 bytes in memory and width is clamped to active
- * pixels of scan.
- * bytesperline is a multiple of 32.
- */
-static const struct vpfe_pixel_format *
- vpfe_check_format(struct vpfe_device *vpfe_dev,
- struct v4l2_pix_format *pixfmt)
-{
- u32 min_height = 1, min_width = 32, max_width, max_height;
- const struct vpfe_pixel_format *vpfe_pix_fmt;
- u32 pix;
- int temp, found;
-
- vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat);
- if (!vpfe_pix_fmt) {
- /*
- * use current pixel format in the vpfe device. We
- * will find this pix format in the table
- */
- pixfmt->pixelformat = vpfe_dev->fmt.fmt.pix.pixelformat;
- vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat);
- }
-
- /* check if hw supports it */
- temp = 0;
- found = 0;
- while (ccdc_dev->hw_ops.enum_pix(&pix, temp) >= 0) {
- if (vpfe_pix_fmt->pixelformat == pix) {
- found = 1;
- break;
- }
- temp++;
- }
-
- if (!found) {
- /* use current pixel format */
- pixfmt->pixelformat = vpfe_dev->fmt.fmt.pix.pixelformat;
- /*
- * Since this is currently used in the vpfe device, we
- * will find this pix format in the table
- */
- vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat);
- }
-
- /* check what field format is supported */
- if (pixfmt->field == V4L2_FIELD_ANY) {
- /* if field is any, use current value as default */
- pixfmt->field = vpfe_dev->fmt.fmt.pix.field;
- }
-
- /*
- * if field is not same as current field in the vpfe device
- * try matching the field with the sub device field
- */
- if (vpfe_dev->fmt.fmt.pix.field != pixfmt->field) {
- /*
- * If field value is not in the supported fields, use current
- * field used in the device as default
- */
- switch (pixfmt->field) {
- case V4L2_FIELD_INTERLACED:
- case V4L2_FIELD_SEQ_TB:
- /* if sub device is supporting progressive, use that */
- if (!vpfe_dev->std_info.frame_format)
- pixfmt->field = V4L2_FIELD_NONE;
- break;
- case V4L2_FIELD_NONE:
- if (vpfe_dev->std_info.frame_format)
- pixfmt->field = V4L2_FIELD_INTERLACED;
- break;
-
- default:
- /* use current field as default */
- pixfmt->field = vpfe_dev->fmt.fmt.pix.field;
- break;
- }
- }
-
- /* Now adjust image resolutions supported */
- if (pixfmt->field == V4L2_FIELD_INTERLACED ||
- pixfmt->field == V4L2_FIELD_SEQ_TB)
- min_height = 2;
-
- max_width = vpfe_dev->std_info.active_pixels;
- max_height = vpfe_dev->std_info.active_lines;
- min_width /= vpfe_pix_fmt->bpp;
-
- v4l2_info(&vpfe_dev->v4l2_dev, "width = %d, height = %d, bpp = %d\n",
- pixfmt->width, pixfmt->height, vpfe_pix_fmt->bpp);
-
- pixfmt->width = clamp((pixfmt->width), min_width, max_width);
- pixfmt->height = clamp((pixfmt->height), min_height, max_height);
-
- /* If interlaced, adjust height to be a multiple of 2 */
- if (pixfmt->field == V4L2_FIELD_INTERLACED)
- pixfmt->height &= (~1);
- /*
- * recalculate bytesperline and sizeimage since width
- * and height might have changed
- */
- pixfmt->bytesperline = (((pixfmt->width * vpfe_pix_fmt->bpp) + 31)
- & ~31);
- if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12)
- pixfmt->sizeimage =
- pixfmt->bytesperline * pixfmt->height +
- ((pixfmt->bytesperline * pixfmt->height) >> 1);
- else
- pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
-
- v4l2_info(&vpfe_dev->v4l2_dev, "adjusted width = %d, height = %d, bpp = %d, bytesperline = %d, sizeimage = %d\n",
- pixfmt->width, pixfmt->height, vpfe_pix_fmt->bpp,
- pixfmt->bytesperline, pixfmt->sizeimage);
- return vpfe_pix_fmt;
-}
-
-static int vpfe_querycap(struct file *file, void *priv,
- struct v4l2_capability *cap)
-{
- struct vpfe_device *vpfe_dev = video_drvdata(file);
-
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querycap\n");
-
- strscpy(cap->driver, CAPTURE_DRV_NAME, sizeof(cap->driver));
- strscpy(cap->bus_info, "VPFE", sizeof(cap->bus_info));
- strscpy(cap->card, vpfe_dev->cfg->card_name, sizeof(cap->card));
- return 0;
-}
-
-static int vpfe_g_fmt_vid_cap(struct file *file, void *priv,
- struct v4l2_format *fmt)
-{
- struct vpfe_device *vpfe_dev = video_drvdata(file);
-
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_fmt_vid_cap\n");
- /* Fill in the information about format */
- *fmt = vpfe_dev->fmt;
- return 0;
-}
-
-static int vpfe_enum_fmt_vid_cap(struct file *file, void *priv,
- struct v4l2_fmtdesc *fmt)
-{
- struct vpfe_device *vpfe_dev = video_drvdata(file);
- const struct vpfe_pixel_format *pix_fmt;
- u32 pix;
-
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_fmt_vid_cap\n");
-
- if (ccdc_dev->hw_ops.enum_pix(&pix, fmt->index) < 0)
- return -EINVAL;
-
- /* Fill in the information about format */
- pix_fmt = vpfe_lookup_pix_format(pix);
- if (pix_fmt) {
- fmt->pixelformat = pix_fmt->pixelformat;
- return 0;
- }
- return -EINVAL;
-}
-
-static int vpfe_s_fmt_vid_cap(struct file *file, void *priv,
- struct v4l2_format *fmt)
-{
- struct vpfe_device *vpfe_dev = video_drvdata(file);
- const struct vpfe_pixel_format *pix_fmts;
- int ret;
-
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_fmt_vid_cap\n");
-
- /* If streaming is started, return error */
- if (vpfe_dev->started) {
- v4l2_err(&vpfe_dev->v4l2_dev, "Streaming is started\n");
- return -EBUSY;
- }
-
- /* Check for valid frame format */
- pix_fmts = vpfe_check_format(vpfe_dev, &fmt->fmt.pix);
- if (!pix_fmts)
- return -EINVAL;
-
- /* store the pixel format in the device object */
- ret = mutex_lock_interruptible(&vpfe_dev->lock);
- if (ret)
- return ret;
-
- /* First detach any IRQ if currently attached */
- vpfe_detach_irq(vpfe_dev);
- vpfe_dev->fmt = *fmt;
- /* set image capture parameters in the ccdc */
- ret = vpfe_config_ccdc_image_format(vpfe_dev);
- mutex_unlock(&vpfe_dev->lock);
- return ret;
-}
-
-static int vpfe_try_fmt_vid_cap(struct file *file, void *priv,
- struct v4l2_format *f)
-{
- struct vpfe_device *vpfe_dev = video_drvdata(file);
- const struct vpfe_pixel_format *pix_fmts;
-
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_try_fmt_vid_cap\n");
-
- pix_fmts = vpfe_check_format(vpfe_dev, &f->fmt.pix);
- if (!pix_fmts)
- return -EINVAL;
- return 0;
-}
-
-/*
- * vpfe_get_subdev_input_index - Get subdev index and subdev input index for a
- * given app input index
- */
-static int vpfe_get_subdev_input_index(struct vpfe_device *vpfe_dev,
- int *subdev_index,
- int *subdev_input_index,
- int app_input_index)
-{
- struct vpfe_config *cfg = vpfe_dev->cfg;
- struct vpfe_subdev_info *sdinfo;
- int i, j = 0;
-
- for (i = 0; i < cfg->num_subdevs; i++) {
- sdinfo = &cfg->sub_devs[i];
- if (app_input_index < (j + sdinfo->num_inputs)) {
- *subdev_index = i;
- *subdev_input_index = app_input_index - j;
- return 0;
- }
- j += sdinfo->num_inputs;
- }
- return -EINVAL;
-}
-
-/*
- * vpfe_get_app_input - Get app input index for a given subdev input index
- * driver stores the input index of the current sub device and translate it
- * when application request the current input
- */
-static int vpfe_get_app_input_index(struct vpfe_device *vpfe_dev,
- int *app_input_index)
-{
- struct vpfe_config *cfg = vpfe_dev->cfg;
- struct vpfe_subdev_info *sdinfo;
- int i, j = 0;
-
- for (i = 0; i < cfg->num_subdevs; i++) {
- sdinfo = &cfg->sub_devs[i];
- if (!strcmp(sdinfo->name, vpfe_dev->current_subdev->name)) {
- if (vpfe_dev->current_input >= sdinfo->num_inputs)
- return -1;
- *app_input_index = j + vpfe_dev->current_input;
- return 0;
- }
- j += sdinfo->num_inputs;
- }
- return -EINVAL;
-}
-
-static int vpfe_enum_input(struct file *file, void *priv,
- struct v4l2_input *inp)
-{
- struct vpfe_device *vpfe_dev = video_drvdata(file);
- struct vpfe_subdev_info *sdinfo;
- int subdev, index ;
-
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_input\n");
-
- if (vpfe_get_subdev_input_index(vpfe_dev,
- &subdev,
- &index,
- inp->index) < 0) {
- v4l2_err(&vpfe_dev->v4l2_dev, "input information not found for the subdev\n");
- return -EINVAL;
- }
- sdinfo = &vpfe_dev->cfg->sub_devs[subdev];
- *inp = sdinfo->inputs[index];
- return 0;
-}
-
-static int vpfe_g_input(struct file *file, void *priv, unsigned int *index)
-{
- struct vpfe_device *vpfe_dev = video_drvdata(file);
-
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_input\n");
-
- return vpfe_get_app_input_index(vpfe_dev, index);
-}
-
-
-static int vpfe_s_input(struct file *file, void *priv, unsigned int index)
-{
- struct vpfe_device *vpfe_dev = video_drvdata(file);
- struct v4l2_subdev *sd;
- struct vpfe_subdev_info *sdinfo;
- int subdev_index, inp_index;
- struct vpfe_route *route;
- u32 input, output;
- int ret;
-
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_input\n");
-
- ret = mutex_lock_interruptible(&vpfe_dev->lock);
- if (ret)
- return ret;
-
- /*
- * If streaming is started return device busy
- * error
- */
- if (vpfe_dev->started) {
- v4l2_err(&vpfe_dev->v4l2_dev, "Streaming is on\n");
- ret = -EBUSY;
- goto unlock_out;
- }
- ret = vpfe_get_subdev_input_index(vpfe_dev,
- &subdev_index,
- &inp_index,
- index);
- if (ret < 0) {
- v4l2_err(&vpfe_dev->v4l2_dev, "invalid input index\n");
- goto unlock_out;
- }
-
- sdinfo = &vpfe_dev->cfg->sub_devs[subdev_index];
- sd = vpfe_dev->sd[subdev_index];
- route = &sdinfo->routes[inp_index];
- if (route && sdinfo->can_route) {
- input = route->input;
- output = route->output;
- } else {
- input = 0;
- output = 0;
- }
-
- if (sd)
- ret = v4l2_subdev_call(sd, video, s_routing, input, output, 0);
-
- if (ret) {
- v4l2_err(&vpfe_dev->v4l2_dev,
- "vpfe_doioctl:error in setting input in decoder\n");
- ret = -EINVAL;
- goto unlock_out;
- }
- vpfe_dev->current_subdev = sdinfo;
- if (sd)
- vpfe_dev->v4l2_dev.ctrl_handler = sd->ctrl_handler;
- vpfe_dev->current_input = index;
- vpfe_dev->std_index = 0;
-
- /* set the bus/interface parameter for the sub device in ccdc */
- ret = ccdc_dev->hw_ops.set_hw_if_params(&sdinfo->ccdc_if_params);
- if (ret)
- goto unlock_out;
-
- /* set the default image parameters in the device */
- ret = vpfe_config_image_format(vpfe_dev,
- vpfe_standards[vpfe_dev->std_index].std_id);
-unlock_out:
- mutex_unlock(&vpfe_dev->lock);
- return ret;
-}
-
-static int vpfe_querystd(struct file *file, void *priv, v4l2_std_id *std_id)
-{
- struct vpfe_device *vpfe_dev = video_drvdata(file);
- struct vpfe_subdev_info *sdinfo;
- int ret;
-
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querystd\n");
-
- ret = mutex_lock_interruptible(&vpfe_dev->lock);
- sdinfo = vpfe_dev->current_subdev;
- if (ret)
- return ret;
- /* Call querystd function of decoder device */
- ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
- video, querystd, std_id);
- mutex_unlock(&vpfe_dev->lock);
- return ret;
-}
-
-static int vpfe_s_std(struct file *file, void *priv, v4l2_std_id std_id)
-{
- struct vpfe_device *vpfe_dev = video_drvdata(file);
- struct vpfe_subdev_info *sdinfo;
- int ret;
-
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_std\n");
-
- /* Call decoder driver function to set the standard */
- ret = mutex_lock_interruptible(&vpfe_dev->lock);
- if (ret)
- return ret;
-
- sdinfo = vpfe_dev->current_subdev;
- /* If streaming is started, return device busy error */
- if (vpfe_dev->started) {
- v4l2_err(&vpfe_dev->v4l2_dev, "streaming is started\n");
- ret = -EBUSY;
- goto unlock_out;
- }
-
- ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
- video, s_std, std_id);
- if (ret < 0) {
- v4l2_err(&vpfe_dev->v4l2_dev, "Failed to set standard\n");
- goto unlock_out;
- }
- ret = vpfe_config_image_format(vpfe_dev, std_id);
-
-unlock_out:
- mutex_unlock(&vpfe_dev->lock);
- return ret;
-}
-
-static int vpfe_g_std(struct file *file, void *priv, v4l2_std_id *std_id)
-{
- struct vpfe_device *vpfe_dev = video_drvdata(file);
-
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_std\n");
-
- *std_id = vpfe_standards[vpfe_dev->std_index].std_id;
- return 0;
-}
-/*
- * Videobuf operations
- */
-static int vpfe_videobuf_setup(struct videobuf_queue *vq,
- unsigned int *count,
- unsigned int *size)
-{
- struct vpfe_fh *fh = vq->priv_data;
- struct vpfe_device *vpfe_dev = fh->vpfe_dev;
-
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_setup\n");
- *size = vpfe_dev->fmt.fmt.pix.sizeimage;
- if (vpfe_dev->memory == V4L2_MEMORY_MMAP &&
- vpfe_dev->fmt.fmt.pix.sizeimage > config_params.device_bufsize)
- *size = config_params.device_bufsize;
-
- if (*count < config_params.min_numbuffers)
- *count = config_params.min_numbuffers;
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
- "count=%d, size=%d\n", *count, *size);
- return 0;
-}
-
-static int vpfe_videobuf_prepare(struct videobuf_queue *vq,
- struct videobuf_buffer *vb,
- enum v4l2_field field)
-{
- struct vpfe_fh *fh = vq->priv_data;
- struct vpfe_device *vpfe_dev = fh->vpfe_dev;
- unsigned long addr;
- int ret;
-
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_prepare\n");
-
- /* If buffer is not initialized, initialize it */
- if (VIDEOBUF_NEEDS_INIT == vb->state) {
- vb->width = vpfe_dev->fmt.fmt.pix.width;
- vb->height = vpfe_dev->fmt.fmt.pix.height;
- vb->size = vpfe_dev->fmt.fmt.pix.sizeimage;
- vb->field = field;
-
- ret = videobuf_iolock(vq, vb, NULL);
- if (ret < 0)
- return ret;
-
- addr = videobuf_to_dma_contig(vb);
- /* Make sure user addresses are aligned to 32 bytes */
- if (!ALIGN(addr, 32))
- return -EINVAL;
-
- vb->state = VIDEOBUF_PREPARED;
- }
- return 0;
-}
-
-static void vpfe_videobuf_queue(struct videobuf_queue *vq,
- struct videobuf_buffer *vb)
-{
- /* Get the file handle object and device object */
- struct vpfe_fh *fh = vq->priv_data;
- struct vpfe_device *vpfe_dev = fh->vpfe_dev;
- unsigned long flags;
-
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_queue\n");
-
- /* add the buffer to the DMA queue */
- spin_lock_irqsave(&vpfe_dev->dma_queue_lock, flags);
- list_add_tail(&vb->queue, &vpfe_dev->dma_queue);
- spin_unlock_irqrestore(&vpfe_dev->dma_queue_lock, flags);
-
- /* Change state of the buffer */
- vb->state = VIDEOBUF_QUEUED;
-}
-
-static void vpfe_videobuf_release(struct videobuf_queue *vq,
- struct videobuf_buffer *vb)
-{
- struct vpfe_fh *fh = vq->priv_data;
- struct vpfe_device *vpfe_dev = fh->vpfe_dev;
- unsigned long flags;
-
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_videobuf_release\n");
-
- /*
- * We need to flush the buffer from the dma queue since
- * they are de-allocated
- */
- spin_lock_irqsave(&vpfe_dev->dma_queue_lock, flags);
- INIT_LIST_HEAD(&vpfe_dev->dma_queue);
- spin_unlock_irqrestore(&vpfe_dev->dma_queue_lock, flags);
- videobuf_dma_contig_free(vq, vb);
- vb->state = VIDEOBUF_NEEDS_INIT;
-}
-
-static const struct videobuf_queue_ops vpfe_videobuf_qops = {
- .buf_setup = vpfe_videobuf_setup,
- .buf_prepare = vpfe_videobuf_prepare,
- .buf_queue = vpfe_videobuf_queue,
- .buf_release = vpfe_videobuf_release,
-};
-
-/*
- * vpfe_reqbufs. currently support REQBUF only once opening
- * the device.
- */
-static int vpfe_reqbufs(struct file *file, void *priv,
- struct v4l2_requestbuffers *req_buf)
-{
- struct vpfe_device *vpfe_dev = video_drvdata(file);
- struct vpfe_fh *fh = file->private_data;
- int ret;
-
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_reqbufs\n");
-
- if (V4L2_BUF_TYPE_VIDEO_CAPTURE != req_buf->type) {
- v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buffer type\n");
- return -EINVAL;
- }
-
- ret = mutex_lock_interruptible(&vpfe_dev->lock);
- if (ret)
- return ret;
-
- if (vpfe_dev->io_usrs != 0) {
- v4l2_err(&vpfe_dev->v4l2_dev, "Only one IO user allowed\n");
- ret = -EBUSY;
- goto unlock_out;
- }
-
- vpfe_dev->memory = req_buf->memory;
- videobuf_queue_dma_contig_init(&vpfe_dev->buffer_queue,
- &vpfe_videobuf_qops,
- vpfe_dev->pdev,
- &vpfe_dev->irqlock,
- req_buf->type,
- vpfe_dev->fmt.fmt.pix.field,
- sizeof(struct videobuf_buffer),
- fh, NULL);
-
- fh->io_allowed = 1;
- vpfe_dev->io_usrs = 1;
- INIT_LIST_HEAD(&vpfe_dev->dma_queue);
- ret = videobuf_reqbufs(&vpfe_dev->buffer_queue, req_buf);
-unlock_out:
- mutex_unlock(&vpfe_dev->lock);
- return ret;
-}
-
-static int vpfe_querybuf(struct file *file, void *priv,
- struct v4l2_buffer *buf)
-{
- struct vpfe_device *vpfe_dev = video_drvdata(file);
-
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querybuf\n");
-
- if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf->type) {
- v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
- return -EINVAL;
- }
-
- if (vpfe_dev->memory != V4L2_MEMORY_MMAP) {
- v4l2_err(&vpfe_dev->v4l2_dev, "Invalid memory\n");
- return -EINVAL;
- }
- /* Call videobuf_querybuf to get information */
- return videobuf_querybuf(&vpfe_dev->buffer_queue, buf);
-}
-
-static int vpfe_qbuf(struct file *file, void *priv,
- struct v4l2_buffer *p)
-{
- struct vpfe_device *vpfe_dev = video_drvdata(file);
- struct vpfe_fh *fh = file->private_data;
-
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_qbuf\n");
-
- if (V4L2_BUF_TYPE_VIDEO_CAPTURE != p->type) {
- v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
- return -EINVAL;
- }
-
- /*
- * If this file handle is not allowed to do IO,
- * return error
- */
- if (!fh->io_allowed) {
- v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n");
- return -EACCES;
- }
- return videobuf_qbuf(&vpfe_dev->buffer_queue, p);
-}
-
-static int vpfe_dqbuf(struct file *file, void *priv,
- struct v4l2_buffer *buf)
-{
- struct vpfe_device *vpfe_dev = video_drvdata(file);
-
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_dqbuf\n");
-
- if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf->type) {
- v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
- return -EINVAL;
- }
- return videobuf_dqbuf(&vpfe_dev->buffer_queue,
- buf, file->f_flags & O_NONBLOCK);
-}
-
-/*
- * vpfe_calculate_offsets : This function calculates buffers offset
- * for top and bottom field
- */
-static void vpfe_calculate_offsets(struct vpfe_device *vpfe_dev)
-{
- struct v4l2_rect image_win;
-
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_calculate_offsets\n");
-
- ccdc_dev->hw_ops.get_image_window(&image_win);
- vpfe_dev->field_off = image_win.height * image_win.width;
-}
-
-/* vpfe_start_ccdc_capture: start streaming in ccdc/isif */
-static void vpfe_start_ccdc_capture(struct vpfe_device *vpfe_dev)
-{
- ccdc_dev->hw_ops.enable(1);
- if (ccdc_dev->hw_ops.enable_out_to_sdram)
- ccdc_dev->hw_ops.enable_out_to_sdram(1);
- vpfe_dev->started = 1;
-}
-
-/*
- * vpfe_streamon. Assume the DMA queue is not empty.
- * application is expected to call QBUF before calling
- * this ioctl. If not, driver returns error
- */
-static int vpfe_streamon(struct file *file, void *priv,
- enum v4l2_buf_type buf_type)
-{
- struct vpfe_device *vpfe_dev = video_drvdata(file);
- struct vpfe_fh *fh = file->private_data;
- struct vpfe_subdev_info *sdinfo;
- unsigned long addr;
- int ret;
-
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_streamon\n");
-
- if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf_type) {
- v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
- return -EINVAL;
- }
-
- /* If file handle is not allowed IO, return error */
- if (!fh->io_allowed) {
- v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n");
- return -EACCES;
- }
-
- sdinfo = vpfe_dev->current_subdev;
- ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
- video, s_stream, 1);
-
- if (ret && (ret != -ENOIOCTLCMD)) {
- v4l2_err(&vpfe_dev->v4l2_dev, "stream on failed in subdev\n");
- return -EINVAL;
- }
-
- /* If buffer queue is empty, return error */
- if (list_empty(&vpfe_dev->buffer_queue.stream)) {
- v4l2_err(&vpfe_dev->v4l2_dev, "buffer queue is empty\n");
- return -EIO;
- }
-
- /* Call videobuf_streamon to start streaming * in videobuf */
- ret = videobuf_streamon(&vpfe_dev->buffer_queue);
- if (ret)
- return ret;
-
-
- ret = mutex_lock_interruptible(&vpfe_dev->lock);
- if (ret)
- goto streamoff;
- /* Get the next frame from the buffer queue */
- vpfe_dev->next_frm = list_entry(vpfe_dev->dma_queue.next,
- struct videobuf_buffer, queue);
- vpfe_dev->cur_frm = vpfe_dev->next_frm;
- /* Remove buffer from the buffer queue */
- list_del(&vpfe_dev->cur_frm->queue);
- /* Mark state of the current frame to active */
- vpfe_dev->cur_frm->state = VIDEOBUF_ACTIVE;
- /* Initialize field_id and started member */
- vpfe_dev->field_id = 0;
- addr = videobuf_to_dma_contig(vpfe_dev->cur_frm);
-
- /* Calculate field offset */
- vpfe_calculate_offsets(vpfe_dev);
-
- if (vpfe_attach_irq(vpfe_dev) < 0) {
- v4l2_err(&vpfe_dev->v4l2_dev,
- "Error in attaching interrupt handle\n");
- ret = -EFAULT;
- goto unlock_out;
- }
- if (ccdc_dev->hw_ops.configure() < 0) {
- v4l2_err(&vpfe_dev->v4l2_dev,
- "Error in configuring ccdc\n");
- ret = -EINVAL;
- goto unlock_out;
- }
- ccdc_dev->hw_ops.setfbaddr((unsigned long)(addr));
- vpfe_start_ccdc_capture(vpfe_dev);
- mutex_unlock(&vpfe_dev->lock);
- return ret;
-unlock_out:
- mutex_unlock(&vpfe_dev->lock);
-streamoff:
- videobuf_streamoff(&vpfe_dev->buffer_queue);
- return ret;
-}
-
-static int vpfe_streamoff(struct file *file, void *priv,
- enum v4l2_buf_type buf_type)
-{
- struct vpfe_device *vpfe_dev = video_drvdata(file);
- struct vpfe_fh *fh = file->private_data;
- struct vpfe_subdev_info *sdinfo;
- int ret;
-
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_streamoff\n");
-
- if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf_type) {
- v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
- return -EINVAL;
- }
-
- /* If io is allowed for this file handle, return error */
- if (!fh->io_allowed) {
- v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n");
- return -EACCES;
- }
-
- /* If streaming is not started, return error */
- if (!vpfe_dev->started) {
- v4l2_err(&vpfe_dev->v4l2_dev, "device started\n");
- return -EINVAL;
- }
-
- ret = mutex_lock_interruptible(&vpfe_dev->lock);
- if (ret)
- return ret;
-
- vpfe_stop_ccdc_capture(vpfe_dev);
- vpfe_detach_irq(vpfe_dev);
-
- sdinfo = vpfe_dev->current_subdev;
- ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
- video, s_stream, 0);
-
- if (ret && (ret != -ENOIOCTLCMD))
- v4l2_err(&vpfe_dev->v4l2_dev, "stream off failed in subdev\n");
- ret = videobuf_streamoff(&vpfe_dev->buffer_queue);
- mutex_unlock(&vpfe_dev->lock);
- return ret;
-}
-
-static int vpfe_g_pixelaspect(struct file *file, void *priv,
- int type, struct v4l2_fract *f)
-{
- struct vpfe_device *vpfe_dev = video_drvdata(file);
-
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_pixelaspect\n");
-
- if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
- /* If std_index is invalid, then just return (== 1:1 aspect) */
- if (vpfe_dev->std_index >= ARRAY_SIZE(vpfe_standards))
- return 0;
-
- *f = vpfe_standards[vpfe_dev->std_index].pixelaspect;
- return 0;
-}
-
-static int vpfe_g_selection(struct file *file, void *priv,
- struct v4l2_selection *sel)
-{
- struct vpfe_device *vpfe_dev = video_drvdata(file);
-
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_selection\n");
-
- if (sel->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
- return -EINVAL;
-
- switch (sel->target) {
- case V4L2_SEL_TGT_CROP:
- sel->r = vpfe_dev->crop;
- break;
- case V4L2_SEL_TGT_CROP_DEFAULT:
- case V4L2_SEL_TGT_CROP_BOUNDS:
- sel->r.width = vpfe_standards[vpfe_dev->std_index].width;
- sel->r.height = vpfe_standards[vpfe_dev->std_index].height;
- break;
- default:
- return -EINVAL;
- }
- return 0;
-}
-
-static int vpfe_s_selection(struct file *file, void *priv,
- struct v4l2_selection *sel)
-{
- struct vpfe_device *vpfe_dev = video_drvdata(file);
- struct v4l2_rect rect = sel->r;
- int ret;
-
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_selection\n");
-
- if (sel->type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
- sel->target != V4L2_SEL_TGT_CROP)
- return -EINVAL;
-
- if (vpfe_dev->started) {
- /* make sure streaming is not started */
- v4l2_err(&vpfe_dev->v4l2_dev,
- "Cannot change crop when streaming is ON\n");
- return -EBUSY;
- }
-
- ret = mutex_lock_interruptible(&vpfe_dev->lock);
- if (ret)
- return ret;
-
- if (rect.top < 0 || rect.left < 0) {
- v4l2_err(&vpfe_dev->v4l2_dev,
- "doesn't support negative values for top & left\n");
- ret = -EINVAL;
- goto unlock_out;
- }
-
- /* adjust the width to 16 pixel boundary */
- rect.width = ((rect.width + 15) & ~0xf);
-
- /* make sure parameters are valid */
- if ((rect.left + rect.width >
- vpfe_dev->std_info.active_pixels) ||
- (rect.top + rect.height >
- vpfe_dev->std_info.active_lines)) {
- v4l2_err(&vpfe_dev->v4l2_dev, "Error in S_SELECTION params\n");
- ret = -EINVAL;
- goto unlock_out;
- }
- ccdc_dev->hw_ops.set_image_window(&rect);
- vpfe_dev->fmt.fmt.pix.width = rect.width;
- vpfe_dev->fmt.fmt.pix.height = rect.height;
- vpfe_dev->fmt.fmt.pix.bytesperline =
- ccdc_dev->hw_ops.get_line_length();
- vpfe_dev->fmt.fmt.pix.sizeimage =
- vpfe_dev->fmt.fmt.pix.bytesperline *
- vpfe_dev->fmt.fmt.pix.height;
- vpfe_dev->crop = rect;
- sel->r = rect;
-unlock_out:
- mutex_unlock(&vpfe_dev->lock);
- return ret;
-}
-
-/* vpfe capture ioctl operations */
-static const struct v4l2_ioctl_ops vpfe_ioctl_ops = {
- .vidioc_querycap = vpfe_querycap,
- .vidioc_g_fmt_vid_cap = vpfe_g_fmt_vid_cap,
- .vidioc_enum_fmt_vid_cap = vpfe_enum_fmt_vid_cap,
- .vidioc_s_fmt_vid_cap = vpfe_s_fmt_vid_cap,
- .vidioc_try_fmt_vid_cap = vpfe_try_fmt_vid_cap,
- .vidioc_enum_input = vpfe_enum_input,
- .vidioc_g_input = vpfe_g_input,
- .vidioc_s_input = vpfe_s_input,
- .vidioc_querystd = vpfe_querystd,
- .vidioc_s_std = vpfe_s_std,
- .vidioc_g_std = vpfe_g_std,
- .vidioc_reqbufs = vpfe_reqbufs,
- .vidioc_querybuf = vpfe_querybuf,
- .vidioc_qbuf = vpfe_qbuf,
- .vidioc_dqbuf = vpfe_dqbuf,
- .vidioc_streamon = vpfe_streamon,
- .vidioc_streamoff = vpfe_streamoff,
- .vidioc_g_pixelaspect = vpfe_g_pixelaspect,
- .vidioc_g_selection = vpfe_g_selection,
- .vidioc_s_selection = vpfe_s_selection,
-};
-
-static struct vpfe_device *vpfe_initialize(void)
-{
- struct vpfe_device *vpfe_dev;
-
- /* Default number of buffers should be 3 */
- if ((numbuffers > 0) &&
- (numbuffers < config_params.min_numbuffers))
- numbuffers = config_params.min_numbuffers;
-
- /*
- * Set buffer size to min buffers size if invalid buffer size is
- * given
- */
- if (bufsize < config_params.min_bufsize)
- bufsize = config_params.min_bufsize;
-
- config_params.numbuffers = numbuffers;
-
- if (numbuffers)
- config_params.device_bufsize = bufsize;
-
- /* Allocate memory for device objects */
- vpfe_dev = kzalloc(sizeof(*vpfe_dev), GFP_KERNEL);
-
- return vpfe_dev;
-}
-
-/*
- * vpfe_probe : This function creates device entries by register
- * itself to the V4L2 driver and initializes fields of each
- * device objects
- */
-static int vpfe_probe(struct platform_device *pdev)
-{
- struct vpfe_subdev_info *sdinfo;
- struct vpfe_config *vpfe_cfg;
- struct resource *res1;
- struct vpfe_device *vpfe_dev;
- struct i2c_adapter *i2c_adap;
- struct video_device *vfd;
- int ret, i, j;
- int num_subdevs = 0;
-
- /* Get the pointer to the device object */
- vpfe_dev = vpfe_initialize();
-
- if (!vpfe_dev) {
- v4l2_err(pdev->dev.driver,
- "Failed to allocate memory for vpfe_dev\n");
- return -ENOMEM;
- }
-
- vpfe_dev->pdev = &pdev->dev;
-
- if (!pdev->dev.platform_data) {
- v4l2_err(pdev->dev.driver, "Unable to get vpfe config\n");
- ret = -ENODEV;
- goto probe_free_dev_mem;
- }
-
- vpfe_cfg = pdev->dev.platform_data;
- vpfe_dev->cfg = vpfe_cfg;
- if (!vpfe_cfg->ccdc || !vpfe_cfg->card_name || !vpfe_cfg->sub_devs) {
- v4l2_err(pdev->dev.driver, "null ptr in vpfe_cfg\n");
- ret = -ENOENT;
- goto probe_free_dev_mem;
- }
-
- /* Allocate memory for ccdc configuration */
- ccdc_cfg = kmalloc(sizeof(*ccdc_cfg), GFP_KERNEL);
- if (!ccdc_cfg) {
- ret = -ENOMEM;
- goto probe_free_dev_mem;
- }
-
- mutex_lock(&ccdc_lock);
-
- strscpy(ccdc_cfg->name, vpfe_cfg->ccdc, sizeof(ccdc_cfg->name));
- /* Get VINT0 irq resource */
- res1 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!res1) {
- v4l2_err(pdev->dev.driver,
- "Unable to get interrupt for VINT0\n");
- ret = -ENODEV;
- goto probe_free_ccdc_cfg_mem;
- }
- vpfe_dev->ccdc_irq0 = res1->start;
-
- /* Get VINT1 irq resource */
- res1 = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
- if (!res1) {
- v4l2_err(pdev->dev.driver,
- "Unable to get interrupt for VINT1\n");
- ret = -ENODEV;
- goto probe_free_ccdc_cfg_mem;
- }
- vpfe_dev->ccdc_irq1 = res1->start;
-
- ret = request_irq(vpfe_dev->ccdc_irq0, vpfe_isr, 0,
- "vpfe_capture0", vpfe_dev);
-
- if (0 != ret) {
- v4l2_err(pdev->dev.driver, "Unable to request interrupt\n");
- goto probe_free_ccdc_cfg_mem;
- }
-
- vfd = &vpfe_dev->video_dev;
- /* Initialize field of video device */
- vfd->release = video_device_release_empty;
- vfd->fops = &vpfe_fops;
- vfd->ioctl_ops = &vpfe_ioctl_ops;
- vfd->tvnorms = 0;
- vfd->v4l2_dev = &vpfe_dev->v4l2_dev;
- vfd->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
- snprintf(vfd->name, sizeof(vfd->name),
- "%s_V%d.%d.%d",
- CAPTURE_DRV_NAME,
- (VPFE_CAPTURE_VERSION_CODE >> 16) & 0xff,
- (VPFE_CAPTURE_VERSION_CODE >> 8) & 0xff,
- (VPFE_CAPTURE_VERSION_CODE) & 0xff);
-
- ret = v4l2_device_register(&pdev->dev, &vpfe_dev->v4l2_dev);
- if (ret) {
- v4l2_err(pdev->dev.driver,
- "Unable to register v4l2 device.\n");
- goto probe_out_release_irq;
- }
- v4l2_info(&vpfe_dev->v4l2_dev, "v4l2 device registered\n");
- spin_lock_init(&vpfe_dev->irqlock);
- spin_lock_init(&vpfe_dev->dma_queue_lock);
- mutex_init(&vpfe_dev->lock);
-
- /* Initialize field of the device objects */
- vpfe_dev->numbuffers = config_params.numbuffers;
-
- /* register video device */
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
- "trying to register vpfe device.\n");
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
- "video_dev=%p\n", &vpfe_dev->video_dev);
- vpfe_dev->fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
- ret = video_register_device(&vpfe_dev->video_dev,
- VFL_TYPE_VIDEO, -1);
-
- if (ret) {
- v4l2_err(pdev->dev.driver,
- "Unable to register video device.\n");
- goto probe_out_v4l2_unregister;
- }
-
- v4l2_info(&vpfe_dev->v4l2_dev, "video device registered\n");
- /* set the driver data in platform device */
- platform_set_drvdata(pdev, vpfe_dev);
- /* set driver private data */
- video_set_drvdata(&vpfe_dev->video_dev, vpfe_dev);
- i2c_adap = i2c_get_adapter(vpfe_cfg->i2c_adapter_id);
- num_subdevs = vpfe_cfg->num_subdevs;
- vpfe_dev->sd = kmalloc_array(num_subdevs,
- sizeof(*vpfe_dev->sd),
- GFP_KERNEL);
- if (!vpfe_dev->sd) {
- ret = -ENOMEM;
- goto probe_out_video_unregister;
- }
-
- for (i = 0; i < num_subdevs; i++) {
- struct v4l2_input *inps;
-
- sdinfo = &vpfe_cfg->sub_devs[i];
-
- /* Load up the subdevice */
- vpfe_dev->sd[i] =
- v4l2_i2c_new_subdev_board(&vpfe_dev->v4l2_dev,
- i2c_adap,
- &sdinfo->board_info,
- NULL);
- if (vpfe_dev->sd[i]) {
- v4l2_info(&vpfe_dev->v4l2_dev,
- "v4l2 sub device %s registered\n",
- sdinfo->name);
- vpfe_dev->sd[i]->grp_id = sdinfo->grp_id;
- /* update tvnorms from the sub devices */
- for (j = 0; j < sdinfo->num_inputs; j++) {
- inps = &sdinfo->inputs[j];
- vfd->tvnorms |= inps->std;
- }
- } else {
- v4l2_info(&vpfe_dev->v4l2_dev,
- "v4l2 sub device %s register fails\n",
- sdinfo->name);
- ret = -ENXIO;
- goto probe_sd_out;
- }
- }
-
- /* set first sub device as current one */
- vpfe_dev->current_subdev = &vpfe_cfg->sub_devs[0];
- vpfe_dev->v4l2_dev.ctrl_handler = vpfe_dev->sd[0]->ctrl_handler;
-
- /* We have at least one sub device to work with */
- mutex_unlock(&ccdc_lock);
- return 0;
-
-probe_sd_out:
- kfree(vpfe_dev->sd);
-probe_out_video_unregister:
- video_unregister_device(&vpfe_dev->video_dev);
-probe_out_v4l2_unregister:
- v4l2_device_unregister(&vpfe_dev->v4l2_dev);
-probe_out_release_irq:
- free_irq(vpfe_dev->ccdc_irq0, vpfe_dev);
-probe_free_ccdc_cfg_mem:
- kfree(ccdc_cfg);
- mutex_unlock(&ccdc_lock);
-probe_free_dev_mem:
- kfree(vpfe_dev);
- return ret;
-}
-
-/*
- * vpfe_remove : It un-register device from V4L2 driver
- */
-static int vpfe_remove(struct platform_device *pdev)
-{
- struct vpfe_device *vpfe_dev = platform_get_drvdata(pdev);
-
- v4l2_info(pdev->dev.driver, "vpfe_remove\n");
-
- free_irq(vpfe_dev->ccdc_irq0, vpfe_dev);
- kfree(vpfe_dev->sd);
- v4l2_device_unregister(&vpfe_dev->v4l2_dev);
- video_unregister_device(&vpfe_dev->video_dev);
- kfree(vpfe_dev);
- kfree(ccdc_cfg);
- return 0;
-}
-
-static int vpfe_suspend(struct device *dev)
-{
- return 0;
-}
-
-static int vpfe_resume(struct device *dev)
-{
- return 0;
-}
-
-static const struct dev_pm_ops vpfe_dev_pm_ops = {
- .suspend = vpfe_suspend,
- .resume = vpfe_resume,
-};
-
-static struct platform_driver vpfe_driver = {
- .driver = {
- .name = CAPTURE_DRV_NAME,
- .pm = &vpfe_dev_pm_ops,
- },
- .probe = vpfe_probe,
- .remove = vpfe_remove,
-};
-
-module_platform_driver(vpfe_driver);
diff --git a/include/media/davinci/vpfe_capture.h b/include/media/davinci/vpfe_capture.h
deleted file mode 100644
index 4ad53031e2f7..000000000000
--- a/include/media/davinci/vpfe_capture.h
+++ /dev/null
@@ -1,177 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2008-2009 Texas Instruments Inc
- */
-
-#ifndef _VPFE_CAPTURE_H
-#define _VPFE_CAPTURE_H
-
-#ifdef __KERNEL__
-
-/* Header files */
-#include <media/v4l2-dev.h>
-#include <linux/videodev2.h>
-#include <linux/clk.h>
-#include <linux/i2c.h>
-#include <media/v4l2-fh.h>
-#include <media/v4l2-ioctl.h>
-#include <media/v4l2-device.h>
-#include <media/videobuf-dma-contig.h>
-#include <media/davinci/vpfe_types.h>
-
-#define VPFE_CAPTURE_NUM_DECODERS 5
-
-/* Macros */
-#define VPFE_MAJOR_RELEASE 0
-#define VPFE_MINOR_RELEASE 0
-#define VPFE_BUILD 1
-#define VPFE_CAPTURE_VERSION_CODE ((VPFE_MAJOR_RELEASE << 16) | \
- (VPFE_MINOR_RELEASE << 8) | \
- VPFE_BUILD)
-
-#define CAPTURE_DRV_NAME "vpfe-capture"
-
-struct vpfe_pixel_format {
- u32 pixelformat;
- /* bytes per pixel */
- int bpp;
-};
-
-struct vpfe_std_info {
- int active_pixels;
- int active_lines;
- /* current frame format */
- int frame_format;
-};
-
-struct vpfe_route {
- u32 input;
- u32 output;
-};
-
-struct vpfe_subdev_info {
- /* Sub device name */
- char name[32];
- /* Sub device group id */
- int grp_id;
- /* Number of inputs supported */
- int num_inputs;
- /* inputs available at the sub device */
- struct v4l2_input *inputs;
- /* Sub dev routing information for each input */
- struct vpfe_route *routes;
- /* check if sub dev supports routing */
- int can_route;
- /* ccdc bus/interface configuration */
- struct vpfe_hw_if_param ccdc_if_params;
- /* i2c subdevice board info */
- struct i2c_board_info board_info;
-};
-
-struct vpfe_config {
- /* Number of sub devices connected to vpfe */
- int num_subdevs;
- /* i2c bus adapter no */
- int i2c_adapter_id;
- /* information about each subdev */
- struct vpfe_subdev_info *sub_devs;
- /* evm card info */
- char *card_name;
- /* ccdc name */
- char *ccdc;
- /* vpfe clock */
- struct clk *vpssclk;
- struct clk *slaveclk;
- /* Function for Clearing the interrupt */
- void (*clr_intr)(int vdint);
-};
-
-struct vpfe_device {
- /* V4l2 specific parameters */
- /* Identifies video device for this channel */
- struct video_device video_dev;
- /* sub devices */
- struct v4l2_subdev **sd;
- /* vpfe cfg */
- struct vpfe_config *cfg;
- /* V4l2 device */
- struct v4l2_device v4l2_dev;
- /* parent device */
- struct device *pdev;
- /* number of open instances of the channel */
- u32 usrs;
- /* Indicates id of the field which is being displayed */
- u32 field_id;
- /* flag to indicate whether decoder is initialized */
- u8 initialized;
- /* current interface type */
- struct vpfe_hw_if_param vpfe_if_params;
- /* ptr to currently selected sub device */
- struct vpfe_subdev_info *current_subdev;
- /* current input at the sub device */
- int current_input;
- /* Keeps track of the information about the standard */
- struct vpfe_std_info std_info;
- /* std index into std table */
- int std_index;
- /* CCDC IRQs used when CCDC/ISIF output to SDRAM */
- unsigned int ccdc_irq0;
- unsigned int ccdc_irq1;
- /* number of buffers in fbuffers */
- u32 numbuffers;
- /* List of buffer pointers for storing frames */
- u8 *fbuffers[VIDEO_MAX_FRAME];
- /* Pointer pointing to current v4l2_buffer */
- struct videobuf_buffer *cur_frm;
- /* Pointer pointing to next v4l2_buffer */
- struct videobuf_buffer *next_frm;
- /*
- * This field keeps track of type of buffer exchange mechanism
- * user has selected
- */
- enum v4l2_memory memory;
- /* Used to store pixel format */
- struct v4l2_format fmt;
- /*
- * used when IMP is chained to store the crop window which
- * is different from the image window
- */
- struct v4l2_rect crop;
- /* Buffer queue used in video-buf */
- struct videobuf_queue buffer_queue;
- /* Queue of filled frames */
- struct list_head dma_queue;
- /* Used in video-buf */
- spinlock_t irqlock;
- /* IRQ lock for DMA queue */
- spinlock_t dma_queue_lock;
- /* lock used to access this structure */
- struct mutex lock;
- /* number of users performing IO */
- u32 io_usrs;
- /* Indicates whether streaming started */
- u8 started;
- /*
- * offset where second field starts from the starting of the
- * buffer for field separated YCbCr formats
- */
- u32 field_off;
-};
-
-/* File handle structure */
-struct vpfe_fh {
- struct v4l2_fh fh;
- struct vpfe_device *vpfe_dev;
- /* Indicates whether this file handle is doing IO */
- u8 io_allowed;
-};
-
-struct vpfe_config_params {
- u8 min_numbuffers;
- u8 numbuffers;
- u32 min_bufsize;
- u32 device_bufsize;
-};
-
-#endif /* End of __KERNEL__ */
-#endif /* _DAVINCI_VPFE_H */
--
2.29.2
Powered by blists - more mailing lists