[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAD=FV=VsFbei4h_cwhJhReUi8Pk_C-qHu_8iDqfzf_e=C8QnXg@mail.gmail.com>
Date: Wed, 19 Oct 2022 08:48:35 -0700
From: Doug Anderson <dianders@...omium.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Cc: Bjorn Andersson <andersson@...nel.org>,
Andy Gross <agross@...nel.org>,
Konrad Dybcio <konrad.dybcio@...ainline.org>,
Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Matthias Kaehlcke <mka@...omium.org>,
Stephen Boyd <swboyd@...omium.org>,
linux-arm-msm@...r.kernel.org, linux-gpio@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 3/4] arm64: dts: qcom: sc7180: align TLMM pin
configuration with DT schema
Hi,
On Tue, Oct 18, 2022 at 5:14 PM Krzysztof Kozlowski
<krzysztof.kozlowski@...aro.org> wrote:
>
> DT schema expects TLMM pin configuration nodes to be named with
> '-state' suffix and their optional children with '-pins' suffix.
>
> Merge subnodes named 'pinconf' and 'pinmux' into one entry, add function
> where missing (required by bindings for GPIOs) and reorganize overriding
> pins by boards.
>
> Split the SPI and UART configuration into separate nodes
> 1. SPI (MOSI, MISO, SCLK), SPI chip-select, SPI chip-select via GPIO,
> 2. UART per each pin: TX, RX and optional CTS/RTS.
>
> This allows each board to customize them easily without adding any new
> nodes.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
>
> ---
>
> Changes since v2:
> 1. Rebase on reverted SPI CS glitch patch.
>
> Changes since v1:
> 1. Split SPI and UART nodes, after discussion with Doug.
>
> Not tested on hardware.
>
> Cc: Doug Anderson <dianders@...omium.org>
> ---
> arch/arm64/boot/dts/qcom/sc7180-idp.dts | 236 +++----
> .../boot/dts/qcom/sc7180-trogdor-coachz.dtsi | 36 +-
> .../dts/qcom/sc7180-trogdor-homestar.dtsi | 47 +-
> .../dts/qcom/sc7180-trogdor-kingoftown-r0.dts | 16 +-
> .../dts/qcom/sc7180-trogdor-kingoftown.dtsi | 8 +-
> .../boot/dts/qcom/sc7180-trogdor-lazor.dtsi | 16 +-
> .../dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi | 25 +-
> .../boot/dts/qcom/sc7180-trogdor-mrbland.dtsi | 72 +-
> .../qcom/sc7180-trogdor-parade-ps8640.dtsi | 32 +-
> .../boot/dts/qcom/sc7180-trogdor-pazquel.dtsi | 8 +-
> .../boot/dts/qcom/sc7180-trogdor-pompom.dtsi | 14 +-
> .../qcom/sc7180-trogdor-quackingstick.dtsi | 56 +-
> .../arm64/boot/dts/qcom/sc7180-trogdor-r1.dts | 8 +-
> .../dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi | 16 +-
> .../qcom/sc7180-trogdor-wormdingler-rev0.dtsi | 25 +-
> .../dts/qcom/sc7180-trogdor-wormdingler.dtsi | 72 +-
> arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 629 +++++++-----------
> arch/arm64/boot/dts/qcom/sc7180.dtsi | 597 +++++++++--------
> 18 files changed, 776 insertions(+), 1137 deletions(-)
You probably should send a v4 since this now conflicts with commit
c24c9d53e001 ("arm64: dts: qcom: correct white-space before {"), which
has landed.
In any case, this looks nice to me.
Reviewed-by: Douglas Anderson <dianders@...omium.org>
FWIW I put this on a sc7180-trogdor-coachz and the device booted up to
the browser. I didn't do massive amounts of tests, but I'm OK with:
Tested-by: Douglas Anderson <dianders@...omium.org>
Powered by blists - more mailing lists