[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20221019001351.1630089-2-krzysztof.kozlowski@linaro.org>
Date: Tue, 18 Oct 2022 20:13:48 -0400
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Bjorn Andersson <andersson@...nel.org>,
Andy Gross <agross@...nel.org>,
Konrad Dybcio <konrad.dybcio@...ainline.org>,
Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Matthias Kaehlcke <mka@...omium.org>,
Douglas Anderson <dianders@...omium.org>,
Stephen Boyd <swboyd@...omium.org>,
linux-arm-msm@...r.kernel.org, linux-gpio@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH v3 1/4] arm64: dts: qcom: sc7180-trogdor-homestar: fully configure secondary I2S pins
The Trogdor Homestar DTSI adds additional GPIO52 pin to secondary I2S pins
("sec_mi2s_active") and configures it to "mi2s_1" function.
The Trogdor DTSI (which is included by Homestar) configures drive
strength and bias for all "sec_mi2s_active" pins, thus the intention was
to apply this configuration also to GPIO52 on Homestar.
Reported-by: Doug Anderson <dianders@...omium.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Fixes: be0416a3f917 (""arm64: dts: qcom: Add sc7180-trogdor-homestar"")
Reviewed-by: Douglas Anderson <dianders@...omium.org>
---
Changes since v2:
1. Add tags.
Changes since v1:
1. New patch
Not tested on hardware.
Cc: Doug Anderson <dianders@...omium.org>
---
arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
index 1bd6c7dcd9e9..bfab67f4a7c9 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
@@ -194,6 +194,12 @@ pinmux {
pins = "gpio49", "gpio50", "gpio51", "gpio52";
function = "mi2s_1";
};
+
+ pinconf {
+ pins = "gpio49", "gpio50", "gpio51", "gpio52";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
};
&ts_reset_l {
--
2.34.1
Powered by blists - more mailing lists