| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20221020160305.18711-3-afd@ti.com>
Date: Thu, 20 Oct 2022 11:02:55 -0500
From: Andrew Davis <afd@...com>
To: Nishanth Menon <nm@...com>, Vignesh Raghavendra <vigneshr@...com>,
Tero Kristo <kristo@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Bryan Brattlof <bb@...com>,
<linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
CC: Andrew Davis <afd@...com>
Subject: [PATCH 02/12] arm64: dts: ti: k3-j721e: Enable I2C nodes at the board level
I2C nodes defined in the top-level J721e SoC dtsi files are incomplete
and will not be functional unless they are extended with pinmux
information.
As the pinmux is only known at the board integration level, these
nodes should only be enabled when provided with this information.
Disable the I2C nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.
Signed-off-by: Andrew Davis <afd@...com>
---
.../dts/ti/k3-j721e-common-proc-board.dts | 4 ++++
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 7 ++++++
.../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 3 +++
arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 23 +++----------------
4 files changed, 17 insertions(+), 20 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 01afacfe6faaa..24e9db563b234 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -529,6 +529,7 @@ adc {
};
&main_i2c0 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_i2c0_pins_default>;
clock-frequency = <400000>;
@@ -565,6 +566,7 @@ p10-hog {
};
&main_i2c1 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_i2c1_pins_default>;
clock-frequency = <400000>;
@@ -590,6 +592,7 @@ &k3_clks {
};
&main_i2c3 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_i2c3_pins_default>;
clock-frequency = <400000>;
@@ -628,6 +631,7 @@ pcm3168a_1: audio-codec@44 {
};
&main_i2c6 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_i2c6_pins_default>;
clock-frequency = <400000>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 5f85d1cc8b277..61bba78ce354e 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -1229,6 +1229,7 @@ main_i2c0: i2c@...0000 {
clock-names = "fck";
clocks = <&k3_clks 187 0>;
power-domains = <&k3_pds 187 TI_SCI_PD_SHARED>;
+ status = "disabled";
};
main_i2c1: i2c@...0000 {
@@ -1240,6 +1241,7 @@ main_i2c1: i2c@...0000 {
clock-names = "fck";
clocks = <&k3_clks 188 0>;
power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
};
main_i2c2: i2c@...0000 {
@@ -1251,6 +1253,7 @@ main_i2c2: i2c@...0000 {
clock-names = "fck";
clocks = <&k3_clks 189 0>;
power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
};
main_i2c3: i2c@...0000 {
@@ -1262,6 +1265,7 @@ main_i2c3: i2c@...0000 {
clock-names = "fck";
clocks = <&k3_clks 190 0>;
power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
};
main_i2c4: i2c@...0000 {
@@ -1273,6 +1277,7 @@ main_i2c4: i2c@...0000 {
clock-names = "fck";
clocks = <&k3_clks 191 0>;
power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
};
main_i2c5: i2c@...0000 {
@@ -1284,6 +1289,7 @@ main_i2c5: i2c@...0000 {
clock-names = "fck";
clocks = <&k3_clks 192 0>;
power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
};
main_i2c6: i2c@...0000 {
@@ -1295,6 +1301,7 @@ main_i2c6: i2c@...0000 {
clock-names = "fck";
clocks = <&k3_clks 193 0>;
power-domains = <&k3_pds 193 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
};
ufs_wrapper: ufs-wrapper@...0000 {
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index fce88ed23596d..7bb6613796eab 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -147,6 +147,7 @@ mcu_i2c0: i2c@...00000 {
clock-names = "fck";
clocks = <&k3_clks 194 0>;
power-domains = <&k3_pds 194 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
};
mcu_i2c1: i2c@...10000 {
@@ -158,6 +159,7 @@ mcu_i2c1: i2c@...10000 {
clock-names = "fck";
clocks = <&k3_clks 195 0>;
power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
};
wkup_i2c0: i2c@...20000 {
@@ -169,6 +171,7 @@ wkup_i2c0: i2c@...20000 {
clock-names = "fck";
clocks = <&k3_clks 197 0>;
power-domains = <&k3_pds 197 TI_SCI_PD_SHARED>;
+ status = "disabled";
};
fss: fss@...00000 {
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
index 23538c5f43575..1d5a90d968497 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -537,6 +537,7 @@ &ospi1 {
};
&main_i2c0 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_i2c0_pins_default>;
clock-frequency = <400000>;
@@ -564,18 +565,15 @@ i2c@1 {
};
&main_i2c1 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_i2c1_pins_default>;
/* i2c1 is used for DVI DDC, so we need to use 100kHz */
clock-frequency = <100000>;
};
-&main_i2c2 {
- /* Unused */
- status = "disabled";
-};
-
&main_i2c3 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_i2c3_pins_default>;
clock-frequency = <400000>;
@@ -602,21 +600,6 @@ i2c@1 {
};
};
-&main_i2c4 {
- /* Unused */
- status = "disabled";
-};
-
-&main_i2c5 {
- /* Brought out on RPi Header */
- status = "disabled";
-};
-
-&main_i2c6 {
- /* Unused */
- status = "disabled";
-};
-
&main_gpio2 {
status = "disabled";
};
--
2.37.3
Powered by blists - more mailing lists