| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 20 Oct 2022 23:03:17 +0200
From: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
To: linux@...ck-us.net, linux-hwmon@...r.kernel.org
Cc: jdelvare@...e.com, linux-kernel@...r.kernel.org,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Subject: [RFC PATCH v2 1/4] hwmon: (jc42) Convert register access to use an I2C regmap
Switch the jc42 driver to use an I2C regmap to access the registers.
This is done in preparation for improving the caching of registers and
to restore the cached limits during system resume.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
---
drivers/hwmon/Kconfig | 1 +
drivers/hwmon/jc42.c | 102 +++++++++++++++++++++++++-----------------
2 files changed, 63 insertions(+), 40 deletions(-)
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 7ac3daaf59ce..d3bccc8176c5 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -799,6 +799,7 @@ config SENSORS_IT87
config SENSORS_JC42
tristate "JEDEC JC42.4 compliant memory module temperature sensors"
depends on I2C
+ select REGMAP_I2C
help
If you say yes here, you get support for JEDEC JC42.4 compliant
temperature sensors, which are used on many DDR3 memory modules for
diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c
index 30888feaf589..329a80264556 100644
--- a/drivers/hwmon/jc42.c
+++ b/drivers/hwmon/jc42.c
@@ -19,6 +19,7 @@
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/of.h>
+#include <linux/regmap.h>
/* Addresses to scan */
static const unsigned short normal_i2c[] = {
@@ -216,7 +217,7 @@ static const u8 temp_regs[t_num_temp] = {
/* Each client has this additional data */
struct jc42_data {
- struct i2c_client *client;
+ struct regmap *regmap;
struct mutex update_lock; /* protect register access */
bool extended; /* true if extended range supported */
bool valid;
@@ -251,19 +252,16 @@ static int jc42_temp_from_reg(s16 reg)
static struct jc42_data *jc42_update_device(struct device *dev)
{
struct jc42_data *data = dev_get_drvdata(dev);
- struct i2c_client *client = data->client;
- struct jc42_data *ret = data;
- int i, val;
+ unsigned int i, val;
+ int ret;
mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
for (i = 0; i < t_num_temp; i++) {
- val = i2c_smbus_read_word_swapped(client, temp_regs[i]);
- if (val < 0) {
- ret = ERR_PTR(val);
+ ret = regmap_read(data->regmap, temp_regs[i], &val);
+ if (ret)
goto abort;
- }
data->temp[i] = val;
}
data->last_updated = jiffies;
@@ -271,7 +269,7 @@ static struct jc42_data *jc42_update_device(struct device *dev)
}
abort:
mutex_unlock(&data->update_lock);
- return ret;
+ return ret ? ERR_PTR(ret) : data;
}
static int jc42_read(struct device *dev, enum hwmon_sensor_types type,
@@ -326,7 +324,6 @@ static int jc42_write(struct device *dev, enum hwmon_sensor_types type,
u32 attr, int channel, long val)
{
struct jc42_data *data = dev_get_drvdata(dev);
- struct i2c_client *client = data->client;
int diff, hyst;
int ret;
@@ -335,18 +332,18 @@ static int jc42_write(struct device *dev, enum hwmon_sensor_types type,
switch (attr) {
case hwmon_temp_min:
data->temp[t_min] = jc42_temp_to_reg(val, data->extended);
- ret = i2c_smbus_write_word_swapped(client, temp_regs[t_min],
- data->temp[t_min]);
+ ret = regmap_write(data->regmap, temp_regs[t_min],
+ data->temp[t_min]);
break;
case hwmon_temp_max:
data->temp[t_max] = jc42_temp_to_reg(val, data->extended);
- ret = i2c_smbus_write_word_swapped(client, temp_regs[t_max],
- data->temp[t_max]);
+ ret = regmap_write(data->regmap, temp_regs[t_max],
+ data->temp[t_max]);
break;
case hwmon_temp_crit:
data->temp[t_crit] = jc42_temp_to_reg(val, data->extended);
- ret = i2c_smbus_write_word_swapped(client, temp_regs[t_crit],
- data->temp[t_crit]);
+ ret = regmap_write(data->regmap, temp_regs[t_crit],
+ data->temp[t_crit]);
break;
case hwmon_temp_crit_hyst:
/*
@@ -368,9 +365,8 @@ static int jc42_write(struct device *dev, enum hwmon_sensor_types type,
}
data->config = (data->config & ~JC42_CFG_HYST_MASK) |
(hyst << JC42_CFG_HYST_SHIFT);
- ret = i2c_smbus_write_word_swapped(data->client,
- JC42_REG_CONFIG,
- data->config);
+ ret = regmap_write(data->regmap, JC42_REG_CONFIG,
+ data->config);
break;
default:
ret = -EOPNOTSUPP;
@@ -470,51 +466,79 @@ static const struct hwmon_chip_info jc42_chip_info = {
.info = jc42_info,
};
+static bool jc42_readable_reg(struct device *dev, unsigned int reg)
+{
+ return (reg >= JC42_REG_CAP && reg <= JC42_REG_DEVICEID) ||
+ reg == JC42_REG_SMBUS;
+}
+
+static bool jc42_writable_reg(struct device *dev, unsigned int reg)
+{
+ return (reg >= JC42_REG_CONFIG && reg <= JC42_REG_TEMP_CRITICAL) ||
+ reg == JC42_REG_SMBUS;
+}
+
+static bool jc42_volatile_reg(struct device *dev, unsigned int reg)
+{
+ return reg == JC42_REG_CONFIG || reg == JC42_REG_TEMP;
+}
+
+static const struct regmap_config jc42_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 16,
+ .val_format_endian = REGMAP_ENDIAN_BIG,
+ .max_register = JC42_REG_SMBUS,
+ .writeable_reg = jc42_writable_reg,
+ .readable_reg = jc42_readable_reg,
+ .volatile_reg = jc42_volatile_reg,
+};
+
static int jc42_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
struct device *hwmon_dev;
+ unsigned int config, cap;
struct jc42_data *data;
- int config, cap;
+ int ret;
data = devm_kzalloc(dev, sizeof(struct jc42_data), GFP_KERNEL);
if (!data)
return -ENOMEM;
- data->client = client;
+ data->regmap = devm_regmap_init_i2c(client, &jc42_regmap_config);
+ if (IS_ERR(data->regmap))
+ return PTR_ERR(data->regmap);
+
i2c_set_clientdata(client, data);
mutex_init(&data->update_lock);
- cap = i2c_smbus_read_word_swapped(client, JC42_REG_CAP);
- if (cap < 0)
- return cap;
+ ret = regmap_read(data->regmap, JC42_REG_CAP, &cap);
+ if (ret)
+ return ret;
data->extended = !!(cap & JC42_CAP_RANGE);
if (device_property_read_bool(dev, "smbus-timeout-disable")) {
- int smbus;
-
/*
* Not all chips support this register, but from a
* quick read of various datasheets no chip appears
* incompatible with the below attempt to disable
* the timeout. And the whole thing is opt-in...
*/
- smbus = i2c_smbus_read_word_swapped(client, JC42_REG_SMBUS);
- if (smbus < 0)
- return smbus;
- i2c_smbus_write_word_swapped(client, JC42_REG_SMBUS,
- smbus | SMBUS_STMOUT);
+ ret = regmap_set_bits(data->regmap, JC42_REG_SMBUS,
+ SMBUS_STMOUT);
+ if (ret)
+ return ret;
}
- config = i2c_smbus_read_word_swapped(client, JC42_REG_CONFIG);
- if (config < 0)
- return config;
+ ret = regmap_read(data->regmap, JC42_REG_CONFIG, &config);
+ if (ret)
+ return ret;
data->orig_config = config;
if (config & JC42_CFG_SHUTDOWN) {
config &= ~JC42_CFG_SHUTDOWN;
- i2c_smbus_write_word_swapped(client, JC42_REG_CONFIG, config);
+ regmap_write(data->regmap, JC42_REG_CONFIG, config);
}
data->config = config;
@@ -535,7 +559,7 @@ static void jc42_remove(struct i2c_client *client)
config = (data->orig_config & ~JC42_CFG_HYST_MASK)
| (data->config & JC42_CFG_HYST_MASK);
- i2c_smbus_write_word_swapped(client, JC42_REG_CONFIG, config);
+ regmap_write(data->regmap, JC42_REG_CONFIG, config);
}
}
@@ -546,8 +570,7 @@ static int jc42_suspend(struct device *dev)
struct jc42_data *data = dev_get_drvdata(dev);
data->config |= JC42_CFG_SHUTDOWN;
- i2c_smbus_write_word_swapped(data->client, JC42_REG_CONFIG,
- data->config);
+ regmap_write(data->regmap, JC42_REG_CONFIG, data->config);
return 0;
}
@@ -556,8 +579,7 @@ static int jc42_resume(struct device *dev)
struct jc42_data *data = dev_get_drvdata(dev);
data->config &= ~JC42_CFG_SHUTDOWN;
- i2c_smbus_write_word_swapped(data->client, JC42_REG_CONFIG,
- data->config);
+ regmap_write(data->regmap, JC42_REG_CONFIG, data->config);
return 0;
}
--
2.38.1
Powered by blists - more mailing lists