linux-kernel - [PATCH 14/15] arm64: dts: imx8m[m,p]-evk: change to use off-on-delay-us in regulator

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20221020095934.1659449-15-peng.fan@oss.nxp.com>
Date:   Thu, 20 Oct 2022 17:59:33 +0800
From:   "Peng Fan (OSS)" <peng.fan@....nxp.com>
To:     robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
        shawnguo@...nel.org, s.hauer@...gutronix.de
Cc:     kernel@...gutronix.de, festevam@...il.com, linux-imx@....com,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        Haibo Chen <haibo.chen@....com>, Peng Fan <peng.fan@....com>
Subject: [PATCH 14/15] arm64: dts: imx8m[m,p]-evk: change to use off-on-delay-us in regulator

From: Haibo Chen <haibo.chen@....com>

After commit f7907e57aea2 ("regulator: fixed: add off-on-delay"), user
can use "off-on-delay-us" to define the regulator off-delay time.

For SD card, according to the spec requirement, for sd card power reset
operation, it need sd card supply voltage to be lower than 0.5v and keep
over 1ms, otherwise, next time power back the sd card supply voltage to
3.3v, sd card can't support SD3.0 mode again.

This patch add the off-on-delay-us to each board, make sure the sd power
reset behavior is align with the specification. Without this patch, when
do quick system suspend/resume test, some sd card can't work at SD3.0 mode
after system resume back.

Signed-off-by: Haibo Chen <haibo.chen@....com>
Signed-off-by: Peng Fan <peng.fan@....com>
---
 arch/arm64/boot/dts/freescale/imx8mm-evk.dts  | 2 +-
 arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 1 +
 arch/arm64/boot/dts/freescale/imx8mq-evk.dts  | 1 +
 3 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
index c93387fcd498..898735965ac9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
@@ -22,7 +22,7 @@ reg_sd1_vmmc: sd1_regulator {
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio2 10 GPIO_ACTIVE_HIGH>;
-		off-on-delay = <20000>;
+		off-on-delay-us = <20000>;
 		startup-delay-us = <100>;
 		enable-active-high;
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
index ce450965e837..fdbcd2483efc 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
@@ -56,6 +56,7 @@ reg_usdhc2_vmmc: regulator-usdhc2 {
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <20000>;
 		enable-active-high;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index 82387b9cb800..07d9fb2aacf8 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -46,6 +46,7 @@ reg_usdhc2_vmmc: regulator-vsd-3v3 {
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <20000>;
 		enable-active-high;
 	};
 
-- 
2.37.1