| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221021203329.4143397-3-arnd@kernel.org>
Date: Fri, 21 Oct 2022 22:27:36 +0200
From: Arnd Bergmann <arnd@...nel.org>
To: linux-arm-kernel@...ts.infradead.org,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Cc: linux-kernel@...r.kernel.org, Ben Dooks <ben-linux@...ff.org>,
Simtec Linux Team <linux@...tec.co.uk>,
Arnd Bergmann <arnd@...db.de>,
Kwangwoo Lee <kwangwoo.lee@...il.com>,
Peter Korsgaard <jacmet@...site.dk>,
Darius Augulis <augulis.darius@...il.com>,
Maurus Cuelenaere <mcuelenaere@...il.com>,
Alim Akhtar <alim.akhtar@...sung.com>,
Heiko Stuebner <heiko@...ech.de>,
Juerg Haefliger <juerg.haefliger@...onical.com>,
Sam Protsenko <semen.protsenko@...aro.org>,
linux-samsung-soc@...r.kernel.org
Subject: [PATCH 03/21] ARM: s3c: remove most s3c64xx board support
From: Arnd Bergmann <arnd@...db.de>
All traditional board files except for MACH_WLF_CRAGG_6410 were
marked as unused, so remove them now.
Cc: Kwangwoo Lee <kwangwoo.lee@...il.com>
Cc: Peter Korsgaard <jacmet@...site.dk>
Cc: Darius Augulis <augulis.darius@...il.com>
Cc: Maurus Cuelenaere <mcuelenaere@...il.com>
Cc: Ben Dooks <ben-linux@...ff.org>
Signed-off-by: Arnd Bergmann <arnd@...db.de>
---
arch/arm/mach-s3c/Kconfig.s3c64xx | 206 -------
arch/arm/mach-s3c/Makefile.s3c64xx | 13 -
arch/arm/mach-s3c/dev-backlight-s3c64xx.c | 137 -----
arch/arm/mach-s3c/mach-anw6410.c | 230 -------
arch/arm/mach-s3c/mach-hmt.c | 282 ---------
arch/arm/mach-s3c/mach-mini6410.c | 365 -----------
arch/arm/mach-s3c/mach-ncp.c | 100 ---
arch/arm/mach-s3c/mach-real6410.c | 333 ----------
arch/arm/mach-s3c/mach-smartq.c | 424 -------------
arch/arm/mach-s3c/mach-smartq.h | 16 -
arch/arm/mach-s3c/mach-smartq5.c | 154 -----
arch/arm/mach-s3c/mach-smartq7.c | 170 ------
arch/arm/mach-s3c/mach-smdk6400.c | 90 ---
arch/arm/mach-s3c/mach-smdk6410.c | 706 ----------------------
14 files changed, 3226 deletions(-)
delete mode 100644 arch/arm/mach-s3c/dev-backlight-s3c64xx.c
delete mode 100644 arch/arm/mach-s3c/mach-anw6410.c
delete mode 100644 arch/arm/mach-s3c/mach-hmt.c
delete mode 100644 arch/arm/mach-s3c/mach-mini6410.c
delete mode 100644 arch/arm/mach-s3c/mach-ncp.c
delete mode 100644 arch/arm/mach-s3c/mach-real6410.c
delete mode 100644 arch/arm/mach-s3c/mach-smartq.c
delete mode 100644 arch/arm/mach-s3c/mach-smartq.h
delete mode 100644 arch/arm/mach-s3c/mach-smartq5.c
delete mode 100644 arch/arm/mach-s3c/mach-smartq7.c
delete mode 100644 arch/arm/mach-s3c/mach-smdk6400.c
delete mode 100644 arch/arm/mach-s3c/mach-smdk6410.c
diff --git a/arch/arm/mach-s3c/Kconfig.s3c64xx b/arch/arm/mach-s3c/Kconfig.s3c64xx
index 0c1b91c3ac5f..0da214c43fba 100644
--- a/arch/arm/mach-s3c/Kconfig.s3c64xx
+++ b/arch/arm/mach-s3c/Kconfig.s3c64xx
@@ -54,17 +54,6 @@ config S3C64XX_SETUP_SDHCI
Internal configuration for default SDHCI setup for S3C6400 and
S3C6410 SoCs.
-config S3C64XX_DEV_ONENAND1
- bool
- help
- Compile in platform device definition for OneNAND1 controller
-
-config SAMSUNG_DEV_BACKLIGHT
- bool
- depends on SAMSUNG_DEV_PWM
- help
- Compile in platform device definition LCD backlight with PWM Timer
-
# platform specific device setup
config S3C64XX_SETUP_I2C0
@@ -113,201 +102,6 @@ config S3C64XX_SETUP_USB_PHY
# S36400 Macchine support
-config MACH_SMDK6400
- bool "SMDK6400"
- depends on ATAGS && UNUSED_BOARD_FILES
- select CPU_S3C6400
- select S3C64XX_SETUP_SDHCI
- select S3C_DEV_HSMMC1
- help
- Machine support for the Samsung SMDK6400
-
-# S3C6410 machine support
-
-config MACH_ANW6410
- bool "A&W6410"
- depends on ATAGS && UNUSED_BOARD_FILES
- select CPU_S3C6410
- select S3C64XX_SETUP_FB_24BPP
- select S3C_DEV_FB
- help
- Machine support for the A&W6410
-
-config MACH_MINI6410
- bool "MINI6410"
- depends on ATAGS && UNUSED_BOARD_FILES
- select CPU_S3C6410
- select S3C64XX_SETUP_FB_24BPP
- select S3C64XX_SETUP_SDHCI
- select S3C_DEV_FB
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_NAND
- select S3C_DEV_USB_HOST
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_TS
- help
- Machine support for the FriendlyARM MINI6410
-
-config MACH_REAL6410
- bool "REAL6410"
- depends on ATAGS && UNUSED_BOARD_FILES
- select CPU_S3C6410
- select S3C64XX_SETUP_FB_24BPP
- select S3C64XX_SETUP_SDHCI
- select S3C_DEV_FB
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_NAND
- select S3C_DEV_USB_HOST
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_TS
- help
- Machine support for the CoreWind REAL6410
-
-config MACH_SMDK6410
- bool "SMDK6410"
- depends on ATAGS && UNUSED_BOARD_FILES
- select CPU_S3C6410
- select S3C64XX_SETUP_FB_24BPP
- select S3C64XX_SETUP_I2C1
- select S3C64XX_SETUP_IDE
- select S3C64XX_SETUP_KEYPAD
- select S3C64XX_SETUP_SDHCI
- select S3C64XX_SETUP_USB_PHY
- select S3C_DEV_FB
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_I2C1
- select S3C_DEV_RTC
- select S3C_DEV_USB_HOST
- select S3C_DEV_USB_HSOTG
- select S3C_DEV_WDT
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_BACKLIGHT
- select SAMSUNG_DEV_IDE
- select SAMSUNG_DEV_KEYPAD
- select SAMSUNG_DEV_PWM
- select SAMSUNG_DEV_TS
- help
- Machine support for the Samsung SMDK6410
-
-# At least some of the SMDK6410s were shipped with the card detect
-# for the MMC/SD slots connected to the same input. This means that
-# either the boards need to be altered to have channel0 to an alternate
-# configuration or that only one slot can be used.
-
-choice
- prompt "SMDK6410 MMC/SD slot setup"
- depends on MACH_SMDK6410
-
-config SMDK6410_SD_CH0
- bool "Use channel 0 only"
- depends on MACH_SMDK6410
- help
- Select CON7 (channel 0) as the MMC/SD slot, as
- at least some SMDK6410 boards come with the
- resistors fitted so that the card detects for
- channels 0 and 1 are the same.
-
-config SMDK6410_SD_CH1
- bool "Use channel 1 only"
- depends on MACH_SMDK6410
- help
- Select CON6 (channel 1) as the MMC/SD slot, as
- at least some SMDK6410 boards come with the
- resistors fitted so that the card detects for
- channels 0 and 1 are the same.
-
-endchoice
-
-config SMDK6410_WM1190_EV1
- bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
- depends on MACH_SMDK6410
- depends on I2C=y
- select MFD_WM8350_I2C
- select REGULATOR
- select REGULATOR_WM8350
- help
- The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
- and audio daughtercard for the Samsung SMDK6410 reference
- platform. Enabling this option will build support for this
- module into the kernel. The presence of the module will be
- detected at runtime so the resulting kernel can be used
- with or without the 1190-EV1 fitted.
-
-config SMDK6410_WM1192_EV1
- bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
- depends on MACH_SMDK6410
- depends on I2C=y
- select MFD_WM831X
- select MFD_WM831X_I2C
- select REGULATOR
- select REGULATOR_WM831X
- help
- The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
- daughtercard for the Samsung SMDK6410 reference platform.
- Enabling this option will build support for this module into
- the kernel. The presence of the daughtercard will be
- detected at runtime so the resulting kernel can be used
- with or without the 1192-EV1 fitted.
-
-config MACH_NCP
- bool "NCP"
- depends on ATAGS && UNUSED_BOARD_FILES
- select CPU_S3C6410
- select S3C64XX_SETUP_I2C1
- select S3C_DEV_HSMMC1
- select S3C_DEV_I2C1
- help
- Machine support for the Samsung NCP
-
-config MACH_HMT
- bool "Airgoo HMT"
- depends on ATAGS && UNUSED_BOARD_FILES
- select CPU_S3C6410
- select S3C64XX_SETUP_FB_24BPP
- select S3C_DEV_FB
- select S3C_DEV_NAND
- select S3C_DEV_USB_HOST
- select SAMSUNG_DEV_PWM
- help
- Machine support for the Airgoo HMT
-
-config MACH_SMARTQ
- bool
- select CPU_S3C6410
- select S3C64XX_SETUP_FB_24BPP
- select S3C64XX_SETUP_SDHCI
- select S3C64XX_SETUP_USB_PHY
- select S3C_DEV_FB
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_HSMMC2
- select S3C_DEV_HWMON
- select S3C_DEV_RTC
- select S3C_DEV_USB_HOST
- select S3C_DEV_USB_HSOTG
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_PWM
- select SAMSUNG_DEV_TS
- help
- Shared machine support for SmartQ 5/7
-
-config MACH_SMARTQ5
- bool "SmartQ 5"
- depends on ATAGS && UNUSED_BOARD_FILES
- select MACH_SMARTQ
- help
- Machine support for the SmartQ 5
-
-config MACH_SMARTQ7
- bool "SmartQ 7"
- depends on ATAGS && UNUSED_BOARD_FILES
- select MACH_SMARTQ
- help
- Machine support for the SmartQ 7
-
config MACH_WLF_CRAGG_6410
bool "Wolfson Cragganmore 6410"
depends on ATAGS
diff --git a/arch/arm/mach-s3c/Makefile.s3c64xx b/arch/arm/mach-s3c/Makefile.s3c64xx
index 21e919bf2cd1..ba179a22c2af 100644
--- a/arch/arm/mach-s3c/Makefile.s3c64xx
+++ b/arch/arm/mach-s3c/Makefile.s3c64xx
@@ -39,20 +39,7 @@ obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio-s3c64xx.o
obj-$(CONFIG_S3C64XX_SETUP_SPI) += setup-spi-s3c64xx.o
obj-$(CONFIG_S3C64XX_SETUP_USB_PHY) += setup-usb-phy-s3c64xx.o
-obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT) += dev-backlight-s3c64xx.o
-
# Machine support
-
-obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o
-obj-$(CONFIG_MACH_HMT) += mach-hmt.o
-obj-$(CONFIG_MACH_MINI6410) += mach-mini6410.o
-obj-$(CONFIG_MACH_NCP) += mach-ncp.o
-obj-$(CONFIG_MACH_REAL6410) += mach-real6410.o
-obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o
-obj-$(CONFIG_MACH_SMARTQ5) += mach-smartq5.o
-obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o
-obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o
-obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o
endif
diff --git a/arch/arm/mach-s3c/dev-backlight-s3c64xx.c b/arch/arm/mach-s3c/dev-backlight-s3c64xx.c
deleted file mode 100644
index 65488b61e50c..000000000000
diff --git a/arch/arm/mach-s3c/mach-anw6410.c b/arch/arm/mach-s3c/mach-anw6410.c
deleted file mode 100644
index b67eae43e04f..000000000000
diff --git a/arch/arm/mach-s3c/mach-hmt.c b/arch/arm/mach-s3c/mach-hmt.c
deleted file mode 100644
index 49ba16c447aa..000000000000
diff --git a/arch/arm/mach-s3c/mach-mini6410.c b/arch/arm/mach-s3c/mach-mini6410.c
deleted file mode 100644
index 058ae9e8b89f..000000000000
diff --git a/arch/arm/mach-s3c/mach-ncp.c b/arch/arm/mach-s3c/mach-ncp.c
deleted file mode 100644
index 1e65f8bce5c4..000000000000
diff --git a/arch/arm/mach-s3c/mach-real6410.c b/arch/arm/mach-s3c/mach-real6410.c
deleted file mode 100644
index 8c10ebc38a9c..000000000000
diff --git a/arch/arm/mach-s3c/mach-smartq.c b/arch/arm/mach-s3c/mach-smartq.c
deleted file mode 100644
index 5b6e7c2a85ef..000000000000
diff --git a/arch/arm/mach-s3c/mach-smartq.h b/arch/arm/mach-s3c/mach-smartq.h
deleted file mode 100644
index f98132f4f430..000000000000
diff --git a/arch/arm/mach-s3c/mach-smartq5.c b/arch/arm/mach-s3c/mach-smartq5.c
deleted file mode 100644
index ce3fce0bba20..000000000000
diff --git a/arch/arm/mach-s3c/mach-smartq7.c b/arch/arm/mach-s3c/mach-smartq7.c
deleted file mode 100644
index 78ca0e704797..000000000000
diff --git a/arch/arm/mach-s3c/mach-smdk6400.c b/arch/arm/mach-s3c/mach-smdk6400.c
deleted file mode 100644
index a3c1b2a82455..000000000000
diff --git a/arch/arm/mach-s3c/mach-smdk6410.c b/arch/arm/mach-s3c/mach-smdk6410.c
deleted file mode 100644
index e57b2bb61484..000000000000
--
2.29.2
Powered by blists - more mailing lists