[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20221021185331.v8.4.I3ac715e729f6f9b5a3e3001b155df4f9d14e6186@changeid>
Date: Fri, 21 Oct 2022 18:56:23 +0800
From: Sheng-Liang Pan <sheng-liang.pan@...nta.corp-partner.google.com>
To: LKML <linux-kernel@...r.kernel.org>
Cc: dianders@...omium.org,
Sheng-Liang Pan <sheng-liang.pan@...nta.corp-partner.google.com>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...ainline.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
linux-arm-msm@...r.kernel.org
Subject: [PATCH v8 4/4] arm64: dts: qcom: sc7280: Add touchscreen and touchpad support for evoker
Change touchpad and touchscreen node for evoker
Touchpad: SA461D-1011
Touchscreen: GT7986U
Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@...nta.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@...omium.org>
---
Changes in v8:
- updated patch subjects
Changes in v7:
- add compiatable for gt7986
Changes in v6:
- add removed pinctrl and align touchscreen label with herobrine board
Changes in v5:
- new patch for Touchscreen/trackpad in v5
.../boot/dts/qcom/sc7280-herobrine-evoker.dtsi | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi
index a6015491c6082..706dd82a70138 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi
@@ -23,16 +23,15 @@ ap_tp_i2c: &i2c0 {
status = "okay";
clock-frequency = <400000>;
- trackpad: trackpad@2c {
- compatible = "hid-over-i2c";
- reg = <0x2c>;
+ trackpad: trackpad@15 {
+ compatible = "elan,ekth3000";
+ reg = <0x15>;
pinctrl-names = "default";
pinctrl-0 = <&tp_int_odl>;
interrupt-parent = <&tlmm>;
interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
- hid-descr-addr = <0x20>;
vcc-supply = <&pp3300_z1>;
wakeup-source;
@@ -43,9 +42,9 @@ ts_i2c: &i2c13 {
status = "okay";
clock-frequency = <400000>;
- ap_ts: touchscreen@10 {
- compatible = "elan,ekth6915";
- reg = <0x10>;
+ ap_ts: touchscreen@5d {
+ compatible = "goodix,gt7986u", "goodix,gt7375p";
+ reg = <0x5d>;
pinctrl-names = "default";
pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>;
@@ -54,7 +53,7 @@ ap_ts: touchscreen@10 {
reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
- vcc33-supply = <&ts_avdd>;
+ vdd-supply = <&ts_avdd>;
};
};
--
2.34.1
Powered by blists - more mailing lists