linux-kernel - Re: [PATCH v3 2/2] serial: 8250/ingenic: Add support for the JZ4750/JZ4755

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <9W76KR.NVDSVG4IWZ3A3@crapouillou.net>
Date:   Sat, 22 Oct 2022 21:07:21 +0100
From:   Paul Cercueil <paul@...pouillou.net>
To:     Siarhei Volkau <lis8215@...il.com>
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Jiri Slaby <jirislaby@...nel.org>,
        linux-serial@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-mips@...r.kernel.org
Subject: Re: [PATCH v3 2/2] serial: 8250/ingenic: Add support for the
 JZ4750/JZ4755

Hi Siarhei,

Le sam. 22 oct. 2022 à 19:50:47 +0300, Siarhei Volkau 
<lis8215@...il.com> a écrit :
> JZ4750/55/60 (but not JZ4760b) have an extra divisor in between extclk
> and peripheral clock, called CPCCR.ECS, the driver can't figure out 
> the
> real state of the divisor without dirty hack - peek CGU CPCCR 
> register.
> However, we can rely on a vendor's bootloader (u-boot 1.1.6) behavior:
> if (extclk > 16MHz)
>     the divisor is enabled, so the UART driving clock is extclk/2.
> 
> This behavior relies on hardware differences: most boards (if not all)
> with those SoCs have 12 or 24 MHz oscillators but many peripherals 
> want
> 12Mhz to operate properly (AIC and USB-PHY at least).
> 
> The patch doesn't affect JZ4760's behavior as it is subject for 
> another
> patchset with re-classification of all supported ingenic UARTs.
> 
> Link: 
> https://github.com/carlos-wong/uboot_jz4755/blob/master/cpu/mips/jz_serial.c#L158
> Signed-off-by: Siarhei Volkau <lis8215@...il.com>
> ---
>  drivers/tty/serial/8250/8250_ingenic.c | 48 
> ++++++++++++++++++++++----
>  1 file changed, 42 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/tty/serial/8250/8250_ingenic.c 
> b/drivers/tty/serial/8250/8250_ingenic.c
> index 2b2f5d8d2..744705467 100644
> --- a/drivers/tty/serial/8250/8250_ingenic.c
> +++ b/drivers/tty/serial/8250/8250_ingenic.c
> @@ -87,24 +87,19 @@ static void __init 
> ingenic_early_console_setup_clock(struct earlycon_device *dev
>  	dev->port.uartclk = be32_to_cpup(prop);
>  }
> 
> -static int __init ingenic_early_console_setup(struct earlycon_device 
> *dev,
> +static int __init ingenic_earlycon_setup_tail(struct earlycon_device 
> *dev,
>  					      const char *opt)
>  {
>  	struct uart_port *port = &dev->port;
>  	unsigned int divisor;
>  	int baud = 115200;
> 
> -	if (!dev->port.membase)
> -		return -ENODEV;
> -
>  	if (opt) {
>  		unsigned int parity, bits, flow; /* unused for now */
> 
>  		uart_parse_options(opt, &baud, &parity, &bits, &flow);
>  	}
> 
> -	ingenic_early_console_setup_clock(dev);
> -
>  	if (dev->baud)
>  		baud = dev->baud;
>  	divisor = DIV_ROUND_CLOSEST(port->uartclk, 16 * baud);
> @@ -129,9 +124,49 @@ static int __init 
> ingenic_early_console_setup(struct earlycon_device *dev,
>  	return 0;
>  }
> 
> +static int __init ingenic_early_console_setup(struct earlycon_device 
> *dev,
> +					      const char *opt)
> +{
> +	if (!dev->port.membase)
> +		return -ENODEV;
> +
> +	ingenic_early_console_setup_clock(dev);
> +
> +	return ingenic_earlycon_setup_tail(dev, opt);
> +}
> +
> +static int __init jz4750_early_console_setup(struct earlycon_device 
> *dev,
> +					     const char *opt)
> +{
> +	if (!dev->port.membase)
> +		return -ENODEV;
> +
> +	/*
> +	 * JZ4750/55/60 (not JZ4760b) have an extra divisor
> +	 * between extclk and peripheral clock, the
> +	 * driver can't figure out the real state of the
> +	 * divisor without dirty hacks (peek CGU register).
> +	 * However, we can rely on a vendor's behavior:
> +	 * if (extclk > 16MHz)
> +	 *   the divisor is enabled.
> +	 * This behavior relies on hardware differences:
> +	 * most boards with those SoCs have 12 or 24 MHz
> +	 * oscillators but many peripherals want 12Mhz
> +	 * to operate properly (AIC and USB-phy at least).
> +	 */
> +	ingenic_early_console_setup_clock(dev);
> +	if (dev->port.uartclk > 16000000)
> +		dev->port.uartclk /= 2;

I don't understand, didn't we came up to the conclusion in your V1 that 
it was better to force-enable the EXT/2 divider in the ingenic init 
code?

-Paul

> +
> +	return ingenic_earlycon_setup_tail(dev, opt);
> +}
> +
>  OF_EARLYCON_DECLARE(jz4740_uart, "ingenic,jz4740-uart",
>  		    ingenic_early_console_setup);
> 
> +OF_EARLYCON_DECLARE(jz4750_uart, "ingenic,jz4750-uart",
> +		    jz4750_early_console_setup);
> +
>  OF_EARLYCON_DECLARE(jz4770_uart, "ingenic,jz4770-uart",
>  		    ingenic_early_console_setup);
> 
> @@ -328,6 +363,7 @@ static const struct ingenic_uart_config 
> x1000_uart_config = {
> 
>  static const struct of_device_id of_match[] = {
>  	{ .compatible = "ingenic,jz4740-uart", .data = &jz4740_uart_config 
> },
> +	{ .compatible = "ingenic,jz4750-uart", .data = &jz4760_uart_config 
> },
>  	{ .compatible = "ingenic,jz4760-uart", .data = &jz4760_uart_config 
> },
>  	{ .compatible = "ingenic,jz4770-uart", .data = &jz4760_uart_config 
> },
>  	{ .compatible = "ingenic,jz4775-uart", .data = &jz4760_uart_config 
> },
> --
> 2.36.1
>