[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20221024113037.096221850@linuxfoundation.org>
Date: Mon, 24 Oct 2022 13:32:08 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Lucas Stach <l.stach@...gutronix.de>,
Robert Foss <robert.foss@...aro.org>,
Sasha Levin <sashal@...nel.org>,
Neil Armstrong <narmstrong@...libre.com>
Subject: [PATCH 5.10 331/390] drm: bridge: dw_hdmi: only trigger hotplug event on link change
From: Lucas Stach <l.stach@...gutronix.de>
[ Upstream commit da09daf881082266e4075657fac53c7966de8e4d ]
There are two events that signal a real change of the link state: HPD going
high means the sink is newly connected or wants the source to re-read the
EDID, RX sense going low is a indication that the link has been disconnected.
Ignore the other two events that also trigger interrupts, but don't need
immediate attention: HPD going low does not necessarily mean the link has
been lost and should not trigger a immediate read of the status. RX sense
going high also does not require a detect cycle, as HPD going high is the
right point in time to read the EDID.
Signed-off-by: Lucas Stach <l.stach@...gutronix.de>
Reviewed-by: Neil Armstrong <narmstrong@...libre.com> (v1)
Reviewed-by: Robert Foss <robert.foss@...aro.org>
Signed-off-by: Robert Foss <robert.foss@...aro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220826185733.3213248-1-l.stach@pengutronix.de
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index b10228b9e3a9..356c7d0bd035 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -2984,6 +2984,7 @@ static irqreturn_t dw_hdmi_irq(int irq, void *dev_id)
{
struct dw_hdmi *hdmi = dev_id;
u8 intr_stat, phy_int_pol, phy_pol_mask, phy_stat;
+ enum drm_connector_status status = connector_status_unknown;
intr_stat = hdmi_readb(hdmi, HDMI_IH_PHY_STAT0);
phy_int_pol = hdmi_readb(hdmi, HDMI_PHY_POL0);
@@ -3022,13 +3023,15 @@ static irqreturn_t dw_hdmi_irq(int irq, void *dev_id)
cec_notifier_phys_addr_invalidate(hdmi->cec_notifier);
mutex_unlock(&hdmi->cec_notifier_mutex);
}
- }
- if (intr_stat & HDMI_IH_PHY_STAT0_HPD) {
- enum drm_connector_status status = phy_int_pol & HDMI_PHY_HPD
- ? connector_status_connected
- : connector_status_disconnected;
+ if (phy_stat & HDMI_PHY_HPD)
+ status = connector_status_connected;
+
+ if (!(phy_stat & (HDMI_PHY_HPD | HDMI_PHY_RX_SENSE)))
+ status = connector_status_disconnected;
+ }
+ if (status != connector_status_unknown) {
dev_dbg(hdmi->dev, "EVENT=%s\n",
status == connector_status_connected ?
"plugin" : "plugout");
--
2.35.1
Powered by blists - more mailing lists