| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221024113034.918728355@linuxfoundation.org>
Date: Mon, 24 Oct 2022 13:31:18 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org,
Damian Muszynski <damian.muszynski@...el.com>,
Giovanni Cabiddu <giovanni.cabiddu@...el.com>,
Herbert Xu <herbert@...dor.apana.org.au>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.10 281/390] crypto: qat - fix DMA transfer direction
From: Damian Muszynski <damian.muszynski@...el.com>
[ Upstream commit cf5bb835b7c8a5fee7f26455099cca7feb57f5e9 ]
When CONFIG_DMA_API_DEBUG is selected, while running the crypto self
test on the QAT crypto algorithms, the function add_dma_entry() reports
a warning similar to the one below, saying that overlapping mappings
are not supported. This occurs in tests where the input and the output
scatter list point to the same buffers (i.e. two different scatter lists
which point to the same chunks of memory).
The logic that implements the mapping uses the flag DMA_BIDIRECTIONAL
for both the input and the output scatter lists which leads to
overlapped write mappings. These are not supported by the DMA layer.
Fix by specifying the correct DMA transfer directions when mapping
buffers. For in-place operations where the input scatter list
matches the output scatter list, buffers are mapped once with
DMA_BIDIRECTIONAL, otherwise input buffers are mapped using the flag
DMA_TO_DEVICE and output buffers are mapped with DMA_FROM_DEVICE.
Overlapping a read mapping with a write mapping is a valid case in
dma-coherent devices like QAT.
The function that frees and unmaps the buffers, qat_alg_free_bufl()
has been changed accordingly to the changes to the mapping function.
DMA-API: 4xxx 0000:06:00.0: cacheline tracking EEXIST, overlapping mappings aren't supported
WARNING: CPU: 53 PID: 4362 at kernel/dma/debug.c:570 add_dma_entry+0x1e9/0x270
...
Call Trace:
dma_map_page_attrs+0x82/0x2d0
? preempt_count_add+0x6a/0xa0
qat_alg_sgl_to_bufl+0x45b/0x990 [intel_qat]
qat_alg_aead_dec+0x71/0x250 [intel_qat]
crypto_aead_decrypt+0x3d/0x70
test_aead_vec_cfg+0x649/0x810
? number+0x310/0x3a0
? vsnprintf+0x2a3/0x550
? scnprintf+0x42/0x70
? valid_sg_divisions.constprop.0+0x86/0xa0
? test_aead_vec+0xdf/0x120
test_aead_vec+0xdf/0x120
alg_test_aead+0x185/0x400
alg_test+0x3d8/0x500
? crypto_acomp_scomp_free_ctx+0x30/0x30
? __schedule+0x32a/0x12a0
? ttwu_queue_wakelist+0xbf/0x110
? _raw_spin_unlock_irqrestore+0x23/0x40
? try_to_wake_up+0x83/0x570
? _raw_spin_unlock_irqrestore+0x23/0x40
? __set_cpus_allowed_ptr_locked+0xea/0x1b0
? crypto_acomp_scomp_free_ctx+0x30/0x30
cryptomgr_test+0x27/0x50
kthread+0xe6/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
Fixes: d370cec ("crypto: qat - Intel(R) QAT crypto interface")
Link: https://lore.kernel.org/linux-crypto/20220223080400.139367-1-gilad@benyossef.com/
Signed-off-by: Damian Muszynski <damian.muszynski@...el.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@...el.com>
Signed-off-by: Herbert Xu <herbert@...dor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/crypto/qat/qat_common/qat_algs.c | 18 ++++++++++++------
1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/drivers/crypto/qat/qat_common/qat_algs.c b/drivers/crypto/qat/qat_common/qat_algs.c
index 2e2c2ac53609..5b71768fc0c7 100644
--- a/drivers/crypto/qat/qat_common/qat_algs.c
+++ b/drivers/crypto/qat/qat_common/qat_algs.c
@@ -624,11 +624,14 @@ static void qat_alg_free_bufl(struct qat_crypto_instance *inst,
dma_addr_t blpout = qat_req->buf.bloutp;
size_t sz = qat_req->buf.sz;
size_t sz_out = qat_req->buf.sz_out;
+ int bl_dma_dir;
int i;
+ bl_dma_dir = blp != blpout ? DMA_TO_DEVICE : DMA_BIDIRECTIONAL;
+
for (i = 0; i < bl->num_bufs; i++)
dma_unmap_single(dev, bl->bufers[i].addr,
- bl->bufers[i].len, DMA_BIDIRECTIONAL);
+ bl->bufers[i].len, bl_dma_dir);
dma_unmap_single(dev, blp, sz, DMA_TO_DEVICE);
@@ -642,7 +645,7 @@ static void qat_alg_free_bufl(struct qat_crypto_instance *inst,
for (i = bufless; i < blout->num_bufs; i++) {
dma_unmap_single(dev, blout->bufers[i].addr,
blout->bufers[i].len,
- DMA_BIDIRECTIONAL);
+ DMA_FROM_DEVICE);
}
dma_unmap_single(dev, blpout, sz_out, DMA_TO_DEVICE);
@@ -666,6 +669,7 @@ static int qat_alg_sgl_to_bufl(struct qat_crypto_instance *inst,
struct scatterlist *sg;
size_t sz_out, sz = struct_size(bufl, bufers, n);
int node = dev_to_node(&GET_DEV(inst->accel_dev));
+ int bufl_dma_dir;
if (unlikely(!n))
return -EINVAL;
@@ -683,6 +687,8 @@ static int qat_alg_sgl_to_bufl(struct qat_crypto_instance *inst,
qat_req->buf.sgl_src_valid = true;
}
+ bufl_dma_dir = sgl != sglout ? DMA_TO_DEVICE : DMA_BIDIRECTIONAL;
+
for_each_sg(sgl, sg, n, i)
bufl->bufers[i].addr = DMA_MAPPING_ERROR;
@@ -694,7 +700,7 @@ static int qat_alg_sgl_to_bufl(struct qat_crypto_instance *inst,
bufl->bufers[y].addr = dma_map_single(dev, sg_virt(sg),
sg->length,
- DMA_BIDIRECTIONAL);
+ bufl_dma_dir);
bufl->bufers[y].len = sg->length;
if (unlikely(dma_mapping_error(dev, bufl->bufers[y].addr)))
goto err_in;
@@ -737,7 +743,7 @@ static int qat_alg_sgl_to_bufl(struct qat_crypto_instance *inst,
bufers[y].addr = dma_map_single(dev, sg_virt(sg),
sg->length,
- DMA_BIDIRECTIONAL);
+ DMA_FROM_DEVICE);
if (unlikely(dma_mapping_error(dev, bufers[y].addr)))
goto err_out;
bufers[y].len = sg->length;
@@ -767,7 +773,7 @@ static int qat_alg_sgl_to_bufl(struct qat_crypto_instance *inst,
if (!dma_mapping_error(dev, buflout->bufers[i].addr))
dma_unmap_single(dev, buflout->bufers[i].addr,
buflout->bufers[i].len,
- DMA_BIDIRECTIONAL);
+ DMA_FROM_DEVICE);
if (!qat_req->buf.sgl_dst_valid)
kfree(buflout);
@@ -781,7 +787,7 @@ static int qat_alg_sgl_to_bufl(struct qat_crypto_instance *inst,
if (!dma_mapping_error(dev, bufl->bufers[i].addr))
dma_unmap_single(dev, bufl->bufers[i].addr,
bufl->bufers[i].len,
- DMA_BIDIRECTIONAL);
+ bufl_dma_dir);
if (!qat_req->buf.sgl_src_valid)
kfree(bufl);
--
2.35.1
Powered by blists - more mailing lists