[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20221025144117.1010488-4-ioana.ciornei@nxp.com>
Date: Tue, 25 Oct 2022 17:41:17 +0300
From: Ioana Ciornei <ioana.ciornei@....com>
To: shawnguo@...nel.org
Cc: leoyang.li@....com, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, rmk+kernel@...linux.org.uk,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Ioana Ciornei <ioana.ciornei@....com>
Subject: [PATCH 3/3] arm64: dts: ls208xa: specify clock frequencies for the MDIO controllers
Up until now, the external MDIO controller frequency values relied
either on the default ones out of reset or on those setup by u-boot.
Let's just properly specify the MDC frequency in the DTS so that even
without u-boot's intervention Linux can drive the MDIO bus.
Fixes: 0420dde30a90 ("arm64: dts: ls208xa: add the external MDIO nodes")
Signed-off-by: Ioana Ciornei <ioana.ciornei@....com>
---
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index f1b9cc8714dc..348d9e3a9125 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -532,6 +532,9 @@ emdio1: mdio@...6000 {
little-endian;
#address-cells = <1>;
#size-cells = <0>;
+ clock-frequency = <2500000>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@@ -541,6 +544,9 @@ emdio2: mdio@...7000 {
little-endian;
#address-cells = <1>;
#size-cells = <0>;
+ clock-frequency = <2500000>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
--
2.25.1
Powered by blists - more mailing lists