| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 25 Oct 2022 16:14:18 -0700 (PDT)
From: Stefano Stabellini <sstabellini@...nel.org>
To: Oleksandr Tyshchenko <olekstysh@...il.com>
cc: xen-devel@...ts.xenproject.org, linux-kernel@...r.kernel.org,
Oleksandr Tyshchenko <oleksandr_tyshchenko@...m.com>,
Stefano Stabellini <sstabellini@...nel.org>,
Juergen Gross <jgross@...e.com>,
Xenia Ragiadakou <burzalodowa@...il.com>
Subject: Re: [PATCH V4 2/2] xen/virtio: Handle PCI devices which Host controller
is described in DT
On Tue, 25 Oct 2022, Oleksandr Tyshchenko wrote:
> From: Oleksandr Tyshchenko <oleksandr_tyshchenko@...m.com>
>
> Use the same "xen-grant-dma" device concept for the PCI devices
> behind device-tree based PCI Host controller, but with one modification.
> Unlike for platform devices, we cannot use generic IOMMU bindings
> (iommus property), as we need to support more flexible configuration.
> The problem is that PCI devices under the single PCI Host controller
> may have the backends running in different Xen domains and thus have
> different endpoints ID (backend domains ID).
>
> Add ability to deal with generic PCI-IOMMU bindings (iommu-map/
> iommu-map-mask properties) which allows us to describe relationship
> between PCI devices and backend domains ID properly.
>
> To avoid having to look up for the PCI Host bridge twice and reduce
> the amount of checks pass an extra struct device_node *np to
> xen_dt_grant_init_backend_domid().
>
> So with current patch the code expects iommus property for the platform
> devices and iommu-map/iommu-map-mask properties for PCI devices.
>
> The example of generated by the toolstack iommu-map property
> for two PCI devices 0000:00:01.0 and 0000:00:02.0 whose
> backends are running in different Xen domains with IDs 1 and 2
> respectively:
> iommu-map = <0x08 0xfde9 0x01 0x08 0x10 0xfde9 0x02 0x08>;
>
> Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@...m.com>
Reviewed-by: Stefano Stabellini <sstabellini@...nel.org>
> ---
> Slightly RFC. This is needed to support Xen grant mappings for virtio-pci devices
> on Arm at some point in the future. The Xen toolstack side is not completely ready yet.
> Here, for PCI devices we use more flexible way to pass backend domid to the guest
> than for platform devices.
>
> Changes V1 -> V2:
> - update commit description
> - rebase
> - rework to use generic PCI-IOMMU bindings instead of generic IOMMU bindings
>
> Changes V2 -> V3:
> - update commit description, add an example
> - drop xen_dt_map_id() and squash xen_dt_get_pci_host_node() with
> xen_dt_get_node()
> - pass struct device_node *np to xen_is_dt_grant_dma_device() and
> xen_dt_grant_init_backend_domid()
> - pass domid_t *backend_domid instead of struct xen_grant_dma_data *data
> to xen_dt_grant_init_backend_domid()
>
> Changes V3 -> V4:
> - just rebase on new prereq patch
> "xen/virtio: Optimize the setup of "xen-grant-dma" devices"
>
> Previous discussion is at:
> https://lore.kernel.org/xen-devel/20221006174804.2003029-1-olekstysh@gmail.com/
> https://lore.kernel.org/xen-devel/20221015153409.918775-1-olekstysh@gmail.com/
> https://lore.kernel.org/xen-devel/20221021172408.77397-1-olekstysh@gmail.com/
>
> Based on:
> https://git.kernel.org/pub/scm/linux/kernel/git/xen/tip.git/log/?h=for-linus-6.1
> ---
> ---
> drivers/xen/grant-dma-ops.c | 46 +++++++++++++++++++++++++++++++------
> 1 file changed, 39 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/xen/grant-dma-ops.c b/drivers/xen/grant-dma-ops.c
> index 1e797a043980..9784a77fa3c9 100644
> --- a/drivers/xen/grant-dma-ops.c
> +++ b/drivers/xen/grant-dma-ops.c
> @@ -10,6 +10,7 @@
> #include <linux/module.h>
> #include <linux/dma-map-ops.h>
> #include <linux/of.h>
> +#include <linux/pci.h>
> #include <linux/pfn.h>
> #include <linux/xarray.h>
> #include <linux/virtio_anchor.h>
> @@ -292,15 +293,43 @@ static const struct dma_map_ops xen_grant_dma_ops = {
> .dma_supported = xen_grant_dma_supported,
> };
>
> +static struct device_node *xen_dt_get_node(struct device *dev)
> +{
> + if (dev_is_pci(dev)) {
> + struct pci_dev *pdev = to_pci_dev(dev);
> + struct pci_bus *bus = pdev->bus;
> +
> + /* Walk up to the root bus to look for PCI Host controller */
> + while (!pci_is_root_bus(bus))
> + bus = bus->parent;
> +
> + return of_node_get(bus->bridge->parent->of_node);
> + }
> +
> + return of_node_get(dev->of_node);
> +}
> +
> static int xen_dt_grant_init_backend_domid(struct device *dev,
> + struct device_node *np,
> domid_t *backend_domid)
> {
> - struct of_phandle_args iommu_spec;
> + struct of_phandle_args iommu_spec = { .args_count = 1 };
>
> - if (of_parse_phandle_with_args(dev->of_node, "iommus", "#iommu-cells",
> - 0, &iommu_spec)) {
> - dev_dbg(dev, "Cannot parse iommus property\n");
> - return -ESRCH;
> + if (dev_is_pci(dev)) {
> + struct pci_dev *pdev = to_pci_dev(dev);
> + u32 rid = PCI_DEVID(pdev->bus->number, pdev->devfn);
> +
> + if (of_map_id(np, rid, "iommu-map", "iommu-map-mask", &iommu_spec.np,
> + iommu_spec.args)) {
> + dev_dbg(dev, "Cannot translate ID\n");
> + return -ESRCH;
> + }
> + } else {
> + if (of_parse_phandle_with_args(np, "iommus", "#iommu-cells",
> + 0, &iommu_spec)) {
> + dev_dbg(dev, "Cannot parse iommus property\n");
> + return -ESRCH;
> + }
> }
>
> if (!of_device_is_compatible(iommu_spec.np, "xen,grant-dma") ||
> @@ -324,10 +353,13 @@ static int xen_dt_grant_init_backend_domid(struct device *dev,
> static int xen_grant_init_backend_domid(struct device *dev,
> domid_t *backend_domid)
> {
> + struct device_node *np;
> int ret = -ENODEV;
>
> - if (dev->of_node) {
> - ret = xen_dt_grant_init_backend_domid(dev, backend_domid);
> + np = xen_dt_get_node(dev);
> + if (np) {
> + ret = xen_dt_grant_init_backend_domid(dev, np, backend_domid);
> + of_node_put(np);
> } else if (IS_ENABLED(CONFIG_XEN_VIRTIO_FORCE_GRANT) || xen_pv_domain()) {
> dev_info(dev, "Using dom0 as backend\n");
> *backend_domid = 0;
> --
> 2.25.1
>
Powered by blists - more mailing lists