[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20221025072533.2980154-2-andrej.picej@norik.com>
Date: Tue, 25 Oct 2022 09:25:31 +0200
From: Andrej Picej <andrej.picej@...ik.com>
To: linux-watchdog@...r.kernel.org
Cc: wim@...ux-watchdog.org, linux@...ck-us.net, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, shawnguo@...nel.org,
s.hauer@...gutronix.de, kernel@...gutronix.de, festevam@...il.com,
linux-imx@....com, Anson.Huang@....com, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2 1/3] watchdog: imx2_wdg: suspend watchdog in WAIT mode
Putting device into the "Suspend-To-Idle" mode causes watchdog to
trigger and reset the board after set watchdog timeout period elapses.
Introduce new device-tree property "fsl,suspend-in-wait" which suspends
watchdog in WAIT mode. This is done by setting WDW bit in WCR
(Watchdog Control Register) Watchdog operation is restored after exiting
WAIT mode as expected. WAIT mode coresponds with Linux's
"Suspend-To-Idle".
Signed-off-by: Andrej Picej <andrej.picej@...ik.com>
Reviewed-by: Fabio Estevam <festevam@...il.com>
---
Changes in v2:
- validate the property with compatible string, as this functionality
is not supported by all devices.
---
drivers/watchdog/imx2_wdt.c | 37 +++++++++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c
index d0c5d47ddede..dd9866c6f1e5 100644
--- a/drivers/watchdog/imx2_wdt.c
+++ b/drivers/watchdog/imx2_wdt.c
@@ -35,6 +35,7 @@
#define IMX2_WDT_WCR 0x00 /* Control Register */
#define IMX2_WDT_WCR_WT (0xFF << 8) /* -> Watchdog Timeout Field */
+#define IMX2_WDT_WCR_WDW BIT(7) /* -> Watchdog disable for WAIT */
#define IMX2_WDT_WCR_WDA BIT(5) /* -> External Reset WDOG_B */
#define IMX2_WDT_WCR_SRS BIT(4) /* -> Software Reset Signal */
#define IMX2_WDT_WCR_WRE BIT(3) /* -> WDOG Reset Enable */
@@ -67,6 +68,27 @@ struct imx2_wdt_device {
bool ext_reset;
bool clk_is_on;
bool no_ping;
+ bool sleep_wait;
+};
+
+static const char * const wdw_boards[] __initconst = {
+ "fsl,imx25-wdt",
+ "fsl,imx35-wdt",
+ "fsl,imx50-wdt",
+ "fsl,imx51-wdt",
+ "fsl,imx53-wdt",
+ "fsl,imx6q-wdt",
+ "fsl,imx6sl-wdt",
+ "fsl,imx6sll-wdt",
+ "fsl,imx6sx-wdt",
+ "fsl,imx6ul-wdt",
+ "fsl,imx7d-wdt",
+ "fsl,imx8mm-wdt",
+ "fsl,imx8mn-wdt",
+ "fsl,imx8mp-wdt",
+ "fsl,imx8mq-wdt",
+ "fsl,vf610-wdt",
+ NULL
};
static bool nowayout = WATCHDOG_NOWAYOUT;
@@ -129,6 +151,9 @@ static inline void imx2_wdt_setup(struct watchdog_device *wdog)
/* Suspend timer in low power mode, write once-only */
val |= IMX2_WDT_WCR_WDZST;
+ /* Suspend timer in low power WAIT mode, write once-only */
+ if (wdev->sleep_wait)
+ val |= IMX2_WDT_WCR_WDW;
/* Strip the old watchdog Time-Out value */
val &= ~IMX2_WDT_WCR_WT;
/* Generate internal chip-level reset if WDOG times out */
@@ -313,6 +338,18 @@ static int __init imx2_wdt_probe(struct platform_device *pdev)
wdev->ext_reset = of_property_read_bool(dev->of_node,
"fsl,ext-reset-output");
+
+ if (of_property_read_bool(dev->of_node, "fsl,suspend-in-wait"))
+ if (of_device_compatible_match(dev->of_node, wdw_boards))
+ wdev->sleep_wait = 1;
+ else {
+ dev_warn(dev, "Warning: Suspending watchdog during " \
+ "WAIT mode is not supported for this device.\n");
+ wdev->sleep_wait = 0;
+ }
+ else
+ wdev->sleep_wait = 0;
+
/*
* The i.MX7D doesn't support low power mode, so we need to ping the watchdog
* during suspend.
--
2.25.1
Powered by blists - more mailing lists