[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1666693096-180008-19-git-send-email-john.garry@huawei.com>
Date: Tue, 25 Oct 2022 18:18:12 +0800
From: John Garry <john.garry@...wei.com>
To: <axboe@...nel.dk>, <damien.lemoal@...nsource.wdc.com>,
<jejb@...ux.ibm.com>, <martin.petersen@...cle.com>,
<jinpu.wang@...ud.ionos.com>, <hare@...e.de>, <bvanassche@....org>,
<hch@....de>, <ming.lei@...hat.com>, <niklas.cassel@....com>
CC: <linux-block@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-ide@...r.kernel.org>, <linux-scsi@...r.kernel.org>,
<linuxarm@...wei.com>, John Garry <john.garry@...wei.com>
Subject: [PATCH RFC v3 18/22] scsi: libsas: Queue SMP commands as requests
Send SMP commands through the block layer so that each command gets a
unique tag associated.
Function sas_task_complete_internal() is what the LLDD calls to signal
that the CQ is complete and this calls into the SCSI midlayer. And then
sas_blk_end_sync_rq() is called when the request completes.
Signed-off-by: John Garry <john.garry@...wei.com>
---
drivers/scsi/libsas/sas_expander.c | 23 ++++++++---------------
drivers/scsi/libsas/sas_init.c | 3 +++
drivers/scsi/libsas/sas_internal.h | 3 +++
drivers/scsi/libsas/sas_scsi_host.c | 16 ++++++++++++++++
4 files changed, 30 insertions(+), 15 deletions(-)
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index e7cb95683522..cc41127ea5cc 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -43,34 +43,27 @@ static int smp_execute_task_sg(struct domain_device *dev,
pm_runtime_get_sync(ha->dev);
mutex_lock(&dev->ex_dev.cmd_mutex);
for (retry = 0; retry < 3; retry++) {
+ struct request *rq;
+
if (test_bit(SAS_DEV_GONE, &dev->state)) {
res = -ECOMM;
break;
}
- task = sas_alloc_slow_task(GFP_KERNEL);
+ task = sas_alloc_slow_task_rq(dev, GFP_KERNEL);
if (!task) {
res = -ENOMEM;
break;
}
- task->dev = dev;
+
+ rq = scsi_cmd_to_rq(task->uldd_task);
+ rq->timeout = SMP_TIMEOUT*HZ;
+
task->task_proto = dev->tproto;
task->smp_task.smp_req = *req;
task->smp_task.smp_resp = *resp;
- task->task_done = sas_task_internal_done;
-
- task->slow_task->timer.function = sas_task_internal_timedout;
- task->slow_task->timer.expires = jiffies + SMP_TIMEOUT*HZ;
- add_timer(&task->slow_task->timer);
-
- res = i->dft->lldd_execute_task(task, GFP_KERNEL);
-
- if (res) {
- del_timer_sync(&task->slow_task->timer);
- pr_notice("executing SMP task failed:%d\n", res);
- break;
- }
+ blk_execute_rq_nowait(rq, true);
wait_for_completion(&task->slow_task->completion);
res = -ECOMM;
diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c
index 90e63ff5e966..5f9e71a54799 100644
--- a/drivers/scsi/libsas/sas_init.c
+++ b/drivers/scsi/libsas/sas_init.c
@@ -84,6 +84,7 @@ struct sas_task *sas_alloc_slow_task_rq(struct domain_device *device, gfp_t flag
return NULL;
task->dev = device;
+ task->task_done = sas_task_complete_internal;
rq = scsi_alloc_request(sdev->request_queue, REQ_OP_DRV_IN,
BLK_MQ_REQ_RESERVED | BLK_MQ_REQ_NOWAIT);
@@ -95,6 +96,8 @@ struct sas_task *sas_alloc_slow_task_rq(struct domain_device *device, gfp_t flag
scmd = blk_mq_rq_to_pdu(rq);
task->uldd_task = scmd;
+
+ rq->end_io = sas_blk_end_sync_rq;
rq->end_io_data = task;
return task;
diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h
index f5ae4de382f7..9b58948c57c2 100644
--- a/drivers/scsi/libsas/sas_internal.h
+++ b/drivers/scsi/libsas/sas_internal.h
@@ -104,6 +104,9 @@ int sas_execute_tmf(struct domain_device *device, void *parameter,
int para_len, int force_phy_id,
struct sas_tmf_task *tmf);
+void sas_task_complete_internal(struct sas_task *task);
+enum rq_end_io_ret sas_blk_end_sync_rq(struct request *rq, blk_status_t error);
+
#ifdef CONFIG_SCSI_SAS_HOST_SMP
extern void sas_smp_host_handler(struct bsg_job *job, struct Scsi_Host *shost);
#else
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index b7d1994a8f1b..2c734a87bb7c 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -913,6 +913,13 @@ void sas_task_internal_done(struct sas_task *task)
complete(&task->slow_task->completion);
}
+void sas_task_complete_internal(struct sas_task *task)
+{
+ struct scsi_cmnd *scmd = task->uldd_task;
+
+ scsi_done(scmd);
+}
+
void sas_task_internal_timedout(struct timer_list *t)
{
struct sas_task_slow *slow = from_timer(slow, t, timer);
@@ -952,6 +959,15 @@ EXPORT_SYMBOL_GPL(sas_internal_timeout);
#define TASK_TIMEOUT (20 * HZ)
#define TASK_RETRY 3
+enum rq_end_io_ret sas_blk_end_sync_rq(struct request *rq, blk_status_t error)
+{
+ struct scsi_cmnd *scmd = blk_mq_rq_to_pdu(rq);
+ struct sas_task *task = TO_SAS_TASK(scmd);
+ complete(&task->slow_task->completion);
+
+ return RQ_END_IO_NONE;
+}
+
static int sas_execute_internal_abort(struct domain_device *device,
enum sas_internal_abort type, u16 tag,
unsigned int qid, void *data)
--
2.35.3
Powered by blists - more mailing lists