[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20221026110210.6575-7-srinivas.kandagatla@linaro.org>
Date: Wed, 26 Oct 2022 12:02:10 +0100
From: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
To: vkoul@...nel.org, yung-chuan.liao@...ux.intel.com
Cc: andersson@...nel.org, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org,
pierre-louis.bossart@...ux.intel.com, sanyog.r.kale@...el.com,
srinivas.kandagatla@...aro.org, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
alsa-devel@...a-project.org
Subject: [PATCH 6/6] soundwire: qcom: add support for v1.7 Soundwire Controller
This patch add support for v1.7 SoundWire Controller which has
support for Multi-EE (Execution Environment), resulting in a
new register and extending field in BUS_CTRL register.
With these updates v1.7.0 is fully supported.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
---
drivers/soundwire/qcom.c | 20 ++++++++++++++++++--
1 file changed, 18 insertions(+), 2 deletions(-)
diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
index 54d370f4b291..335424870290 100644
--- a/drivers/soundwire/qcom.c
+++ b/drivers/soundwire/qcom.c
@@ -25,6 +25,8 @@
#define SWRM_COMP_SW_RESET 0x008
#define SWRM_COMP_STATUS 0x014
+#define SWRM_LINK_MANAGER_EE 0x018
+#define SWRM_EE_CPU 1
#define SWRM_FRM_GEN_ENABLED BIT(0)
#define SWRM_COMP_HW_VERSION 0x00
#define SWRM_COMP_CFG_ADDR 0x04
@@ -693,7 +695,14 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl)
u32p_replace_bits(&val, SWRM_DEF_CMD_NO_PINGS, SWRM_MCP_CFG_MAX_NUM_OF_CMD_NO_PINGS_BMSK);
ctrl->reg_write(ctrl, SWRM_MCP_CFG_ADDR, val);
- ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL, SWRM_MCP_BUS_CLK_START);
+ if (ctrl->version >= 0x01070000) {
+ ctrl->reg_write(ctrl, SWRM_LINK_MANAGER_EE, SWRM_EE_CPU);
+ ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL,
+ SWRM_MCP_BUS_CLK_START << SWRM_EE_CPU);
+ } else {
+ ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL, SWRM_MCP_BUS_CLK_START);
+ }
+
/* Configure number of retries of a read/write cmd */
if (ctrl->version > 0x01050001) {
/* Only for versions >= 1.5.1 */
@@ -1518,7 +1527,13 @@ static int __maybe_unused swrm_runtime_resume(struct device *dev)
} else {
reset_control_reset(ctrl->audio_cgcr);
- ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL, SWRM_MCP_BUS_CLK_START);
+ if (ctrl->version >= 0x01070000) {
+ ctrl->reg_write(ctrl, SWRM_LINK_MANAGER_EE, SWRM_EE_CPU);
+ ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL,
+ SWRM_MCP_BUS_CLK_START << SWRM_EE_CPU);
+ } else {
+ ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL, SWRM_MCP_BUS_CLK_START);
+ }
ctrl->reg_write(ctrl, SWRM_INTERRUPT_CLEAR,
SWRM_INTERRUPT_STATUS_MASTER_CLASH_DET);
@@ -1582,6 +1597,7 @@ static const struct of_device_id qcom_swrm_of_match[] = {
{ .compatible = "qcom,soundwire-v1.3.0", .data = &swrm_v1_3_data },
{ .compatible = "qcom,soundwire-v1.5.1", .data = &swrm_v1_5_data },
{ .compatible = "qcom,soundwire-v1.6.0", .data = &swrm_v1_6_data },
+ { .compatible = "qcom,soundwire-v1.7.0", .data = &swrm_v1_5_data },
{/* sentinel */},
};
--
2.21.0
Powered by blists - more mailing lists