| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAPY8ntCgfLvUuSh=zHxxNPok4ygp1P0Nz--SV-hXKd_jQOL8Uw@mail.gmail.com>
Date: Wed, 26 Oct 2022 17:05:39 +0100
From: Dave Stevenson <dave.stevenson@...pberrypi.com>
To: maxime@...no.tech
Cc: Daniel Vetter <daniel@...ll.ch>, Emma Anholt <emma@...olt.net>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Maxime Ripard <mripard@...nel.org>,
Ray Jui <rjui@...adcom.com>,
Florian Fainelli <f.fainelli@...il.com>,
David Airlie <airlied@...ux.ie>,
Broadcom internal kernel review list
<bcm-kernel-feedback-list@...adcom.com>,
Scott Branden <sbranden@...adcom.com>,
Stefan Wahren <stefan.wahren@...e.com>,
linux-kernel@...r.kernel.org, dri-devel@...ts.freedesktop.org,
Dom Cobley <popcornmix@...il.com>, linux-clk@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-rpi-kernel@...ts.infradead.org
Subject: Re: [PATCH v4 5/7] drm/vc4: hdmi: Rework hdmi_enable_4kp60 detection code
I knew there was something else
On Wed, 26 Oct 2022 at 17:00, Dave Stevenson
<dave.stevenson@...pberrypi.com> wrote:
>
> Hi Maxime
>
> On Thu, 20 Oct 2022 at 10:14, <maxime@...no.tech> wrote:
> >
> > In order to support higher HDMI frequencies, users have to set the
> > hdmi_enable_4kp60 parameter in their config.txt file.
> >
> > This will have the side-effect of raising the maximum of the core clock,
> > tied to the HVS, and managed by the HVS driver.
> >
> > However, we are querying this in the HDMI driver by poking into the HVS
> > structure to get our struct clk handle.
> >
> > Let's make this part of the HVS bind implementation to have all the core
> > clock related setup in the same place.
> >
> > Signed-off-by: Maxime Ripard <maxime@...no.tech>
> > ---
> > drivers/gpu/drm/vc4/vc4_drv.h | 10 ++++++++++
> > drivers/gpu/drm/vc4/vc4_hdmi.c | 15 ++++-----------
> > drivers/gpu/drm/vc4/vc4_hdmi.h | 8 --------
> > drivers/gpu/drm/vc4/vc4_hvs.c | 23 +++++++++++++++++++++++
> > 4 files changed, 37 insertions(+), 19 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h
> > index 418a8242691f..8b2b1af565f9 100644
> > --- a/drivers/gpu/drm/vc4/vc4_drv.h
> > +++ b/drivers/gpu/drm/vc4/vc4_drv.h
> > @@ -326,6 +326,8 @@ struct vc4_hvs {
> >
> > struct clk *core_clk;
> >
> > + unsigned long max_core_rate;
> > +
> > /* Memory manager for CRTCs to allocate space in the display
> > * list. Units are dwords.
> > */
> > @@ -337,6 +339,14 @@ struct vc4_hvs {
> > struct drm_mm_node mitchell_netravali_filter;
> >
> > struct debugfs_regset32 regset;
> > +
> > + /*
> > + * Even if HDMI0 on the RPi4 can output modes requiring a pixel
> > + * rate higher than 297MHz, it needs some adjustments in the
> > + * config.txt file to be able to do so and thus won't always be
> > + * available.
> > + */
> > + bool vc5_hdmi_enable_scrambling;
Name only. This flag isn't to do with scrambling, it's whether we can
achieve pixel rates greater than those defined by HDMI 1.4.
We do have code related to enabling scrambling, which is part of HDMI
2.0, so this currently could cause confusion.
Dave
> > };
> >
> > struct vc4_plane {
> > diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
> > index 87961d4de5aa..afe3daa2173e 100644
> > --- a/drivers/gpu/drm/vc4/vc4_hdmi.c
> > +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
> > @@ -46,7 +46,6 @@
> > #include <linux/pm_runtime.h>
> > #include <linux/rational.h>
> > #include <linux/reset.h>
> > -#include <soc/bcm2835/raspberrypi-clocks.h>
> > #include <sound/dmaengine_pcm.h>
> > #include <sound/hdmi-codec.h>
> > #include <sound/pcm_drm_eld.h>
> > @@ -460,6 +459,7 @@ static int vc4_hdmi_connector_detect_ctx(struct drm_connector *connector,
> > static int vc4_hdmi_connector_get_modes(struct drm_connector *connector)
> > {
> > struct vc4_hdmi *vc4_hdmi = connector_to_vc4_hdmi(connector);
> > + struct vc4_dev *vc4 = to_vc4_dev(connector->dev);
> > int ret = 0;
> > struct edid *edid;
> >
> > @@ -483,7 +483,7 @@ static int vc4_hdmi_connector_get_modes(struct drm_connector *connector)
> > ret = drm_add_edid_modes(connector, edid);
> > kfree(edid);
> >
> > - if (vc4_hdmi->disable_4kp60) {
> > + if (!vc4->hvs->vc5_hdmi_enable_scrambling) {
> > struct drm_device *drm = connector->dev;
> > const struct drm_display_mode *mode;
> >
> > @@ -1757,11 +1757,12 @@ vc4_hdmi_encoder_clock_valid(const struct vc4_hdmi *vc4_hdmi,
> > {
> > const struct drm_connector *connector = &vc4_hdmi->connector;
> > const struct drm_display_info *info = &connector->display_info;
> > + struct vc4_dev *vc4 = to_vc4_dev(connector->dev);
> >
> > if (clock > vc4_hdmi->variant->max_pixel_clock)
> > return MODE_CLOCK_HIGH;
> >
> > - if (vc4_hdmi->disable_4kp60 && clock > HDMI_14_MAX_TMDS_CLK)
> > + if (!vc4->hvs->vc5_hdmi_enable_scrambling && clock > HDMI_14_MAX_TMDS_CLK)
> > return MODE_CLOCK_HIGH;
> >
> > if (info->max_tmds_clock && clock > (info->max_tmds_clock * 1000))
> > @@ -3428,14 +3429,6 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
> > vc4_hdmi->disable_wifi_frequencies =
> > of_property_read_bool(dev->of_node, "wifi-2.4ghz-coexistence");
> >
> > - if (variant->max_pixel_clock == 600000000) {
> > - struct vc4_dev *vc4 = to_vc4_dev(drm);
> > - unsigned long max_rate = rpi_firmware_clk_get_max_rate(vc4->hvs->core_clk);
> > -
> > - if (max_rate < 550000000)
> > - vc4_hdmi->disable_4kp60 = true;
> > - }
> > -
> > ret = devm_pm_runtime_enable(dev);
> > if (ret)
> > return ret;
> > diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
> > index db823efb2563..e3619836ca17 100644
> > --- a/drivers/gpu/drm/vc4/vc4_hdmi.h
> > +++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
> > @@ -156,14 +156,6 @@ struct vc4_hdmi {
> > */
> > bool disable_wifi_frequencies;
> >
> > - /*
> > - * Even if HDMI0 on the RPi4 can output modes requiring a pixel
> > - * rate higher than 297MHz, it needs some adjustments in the
> > - * config.txt file to be able to do so and thus won't always be
> > - * available.
> > - */
> > - bool disable_4kp60;
> > -
> > struct cec_adapter *cec_adap;
> > struct cec_msg cec_rx_msg;
> > bool cec_tx_ok;
> > diff --git a/drivers/gpu/drm/vc4/vc4_hvs.c b/drivers/gpu/drm/vc4/vc4_hvs.c
> > index 4ac9f5a2d5f9..300ac0b57571 100644
> > --- a/drivers/gpu/drm/vc4/vc4_hvs.c
> > +++ b/drivers/gpu/drm/vc4/vc4_hvs.c
> > @@ -28,6 +28,8 @@
> > #include <drm/drm_drv.h>
> > #include <drm/drm_vblank.h>
> >
> > +#include <soc/bcm2835/raspberrypi-firmware.h>
> > +
> > #include "vc4_drv.h"
> > #include "vc4_regs.h"
> >
> > @@ -791,12 +793,33 @@ static int vc4_hvs_bind(struct device *dev, struct device *master, void *data)
> > hvs->regset.nregs = ARRAY_SIZE(hvs_regs);
> >
> > if (vc4->is_vc5) {
> > + struct rpi_firmware *firmware;
> > + struct device_node *node;
> > + unsigned long max_rate;
>
> As commented on patch 4, the value returned by
> rpi_firmware_clk_get_max_rate is only an unsigned int.
> I guess in this case it is passed into the clock frame work which
> wants unsigned long, but do we need to keep it as an unsigned long?
>
> > +
> > + node = rpi_firmware_find_node();
> > + if (!node)
> > + return -EINVAL;
> > +
> > + firmware = rpi_firmware_get(node);
> > + of_node_put(node);
> > + if (!firmware)
> > + return -EPROBE_DEFER;
> > +
> > hvs->core_clk = devm_clk_get(&pdev->dev, NULL);
> > if (IS_ERR(hvs->core_clk)) {
> > dev_err(&pdev->dev, "Couldn't get core clock\n");
> > return PTR_ERR(hvs->core_clk);
> > }
> >
> > + max_rate = rpi_firmware_clk_get_max_rate(firmware,
> > + RPI_FIRMWARE_CORE_CLK_ID);
> > + rpi_firmware_put(firmware);
> > + if (max_rate >= 550000000)
> > + hvs->vc5_hdmi_enable_scrambling = true;
> > +
> > + hvs->max_core_rate = max_rate;
>
> I was going to query the reason for storing this value, but it's used
> when we get to patch 7/7.
> I won't quibble about having it as an unused value for 2 patches.
>
> If you're happy in both cases, then I'll send an R-b.
>
> Dave
>
> > ret = clk_prepare_enable(hvs->core_clk);
> > if (ret) {
> > dev_err(&pdev->dev, "Couldn't enable the core clock\n");
> >
> > --
> > b4 0.10.1
Powered by blists - more mailing lists