| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20221026032624.30871-13-quic_bjorande@quicinc.com>
Date: Tue, 25 Oct 2022 20:26:24 -0700
From: Bjorn Andersson <quic_bjorande@...cinc.com>
To: Rob Clark <robdclark@...il.com>,
Abhinav Kumar <quic_abhinavk@...cinc.com>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
CC: Sean Paul <sean@...rly.run>, David Airlie <airlied@...il.com>,
"Daniel Vetter" <daniel@...ll.ch>,
Rob Herring <robh+dt@...nel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@...aro.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...ainline.org>,
"Kuogee Hsieh" <quic_khsieh@...cinc.com>,
Sankeerth Billakanti <quic_sbillaka@...cinc.com>,
Johan Hovold <johan@...nel.org>,
<linux-arm-msm@...r.kernel.org>, <dri-devel@...ts.freedesktop.org>,
<freedreno@...ts.freedesktop.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH v3 12/12] arm64: dts: qcom: sa8295-adp: Enable DP instances
From: Bjorn Andersson <bjorn.andersson@...aro.org>
The SA8295P ADP has, among other interfaces, six MiniDP connectors which
are connected to MDSS0 DP2 and DP3, and MDSS1 DP0 through DP3.
Enable Display Clock controllers, MDSS instanced, MDPs, DP controllers,
DP PHYs and link them all together.
Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@...cinc.com>
---
Changes since v2:
- New patch on list
arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 244 ++++++++++++++++++++++-
1 file changed, 242 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
index 2c62ba6a49c5..f35345115c85 100644
--- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
@@ -23,6 +23,90 @@ aliases {
chosen {
stdout-path = "serial0:115200n8";
};
+
+ dp2-connector {
+ compatible = "dp-connector";
+ label = "DP2";
+ type = "mini";
+
+ hpd-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+
+ port {
+ dp2_connector_in: endpoint {
+ remote-endpoint = <&mdss1_dp0_phy_out>;
+ };
+ };
+ };
+
+ dp3-connector {
+ compatible = "dp-connector";
+ label = "DP3";
+ type = "mini";
+
+ hpd-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+
+ port {
+ dp3_connector_in: endpoint {
+ remote-endpoint = <&mdss1_dp1_phy_out>;
+ };
+ };
+ };
+
+ edp0-connector {
+ compatible = "dp-connector";
+ label = "EDP0";
+ type = "mini";
+
+ hpd-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+
+ port {
+ edp0_connector_in: endpoint {
+ remote-endpoint = <&mdss0_dp2_phy_out>;
+ };
+ };
+ };
+
+ edp1-connector {
+ compatible = "dp-connector";
+ label = "EDP1";
+ type = "mini";
+
+ hpd-gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+
+ port {
+ edp1_connector_in: endpoint {
+ remote-endpoint = <&mdss0_dp3_phy_out>;
+ };
+ };
+ };
+
+ edp2-connector {
+ compatible = "dp-connector";
+ label = "EDP2";
+ type = "mini";
+
+ hpd-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+
+ port {
+ edp2_connector_in: endpoint {
+ remote-endpoint = <&mdss1_dp2_phy_out>;
+ };
+ };
+ };
+
+ edp3-connector {
+ compatible = "dp-connector";
+ label = "EDP3";
+ type = "mini";
+
+ hpd-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+
+ port {
+ edp3_connector_in: endpoint {
+ remote-endpoint = <&mdss1_dp3_phy_out>;
+ };
+ };
+ };
};
&apps_rsc {
@@ -156,13 +240,169 @@ vreg_l7g: ldo7 {
vreg_l8g: ldo8 {
regulator-name = "vreg_l8g";
- regulator-min-microvolt = <880000>;
- regulator-max-microvolt = <880000>;
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l11g: ldo11 {
+ regulator-name = "vreg_l11g";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
};
+&dispcc0 {
+ status = "okay";
+};
+
+&dispcc1 {
+ status = "okay";
+};
+
+&mdss0 {
+ status = "okay";
+};
+
+&mdss0_dp2 {
+ status = "okay";
+
+ data-lanes = <0 1 2 3>;
+
+ ports {
+ port@1 {
+ reg = <1>;
+ mdss0_dp2_phy_out: endpoint {
+ remote-endpoint = <&edp0_connector_in>;
+ };
+ };
+ };
+};
+
+&mdss0_dp2_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l8g>;
+ vdda-pll-supply = <&vreg_l3g>;
+};
+
+&mdss0_dp3 {
+ status = "okay";
+
+ data-lanes = <0 1 2 3>;
+
+ ports {
+ port@1 {
+ reg = <1>;
+ mdss0_dp3_phy_out: endpoint {
+ remote-endpoint = <&edp1_connector_in>;
+ };
+ };
+ };
+};
+
+&mdss0_dp3_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l8g>;
+ vdda-pll-supply = <&vreg_l3g>;
+};
+
+&mdss1 {
+ status = "okay";
+};
+
+&mdss1_dp0 {
+ status = "okay";
+
+ data-lanes = <0 1 2 3>;
+
+ ports {
+ port@1 {
+ reg = <1>;
+ mdss1_dp0_phy_out: endpoint {
+ remote-endpoint = <&dp2_connector_in>;
+ };
+ };
+ };
+};
+
+&mdss1_dp0_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l11g>;
+ vdda-pll-supply = <&vreg_l3g>;
+};
+
+&mdss1_dp1 {
+ status = "okay";
+
+ data-lanes = <0 1 2 3>;
+
+ ports {
+ port@1 {
+ reg = <1>;
+ mdss1_dp1_phy_out: endpoint {
+ remote-endpoint = <&dp3_connector_in>;
+ };
+ };
+ };
+};
+
+&mdss1_dp1_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l11g>;
+ vdda-pll-supply = <&vreg_l3g>;
+};
+
+&mdss1_dp2 {
+ status = "okay";
+
+ data-lanes = <0 1 2 3>;
+
+ ports {
+ port@1 {
+ reg = <1>;
+ mdss1_dp2_phy_out: endpoint {
+ remote-endpoint = <&edp2_connector_in>;
+ };
+ };
+ };
+};
+
+&mdss1_dp2_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l11g>;
+ vdda-pll-supply = <&vreg_l3g>;
+};
+
+&mdss1_dp3 {
+ status = "okay";
+
+ data-lanes = <0 1 2 3>;
+
+ ports {
+ port@1 {
+ reg = <1>;
+ mdss1_dp3_phy_out: endpoint {
+ remote-endpoint = <&edp3_connector_in>;
+ };
+ };
+ };
+};
+
+&mdss1_dp3_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l11g>;
+ vdda-pll-supply = <&vreg_l3g>;
+};
+
&qup2 {
status = "okay";
};
--
2.37.3
Powered by blists - more mailing lists