| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <6d35dceb-a414-7d3b-722c-5507d27b7ce4@amd.com>
Date: Wed, 26 Oct 2022 14:01:38 -0500
From: Terry Bowman <Terry.Bowman@....com>
To: Dan Williams <dan.j.williams@...el.com>,
alison.schofield@...el.com, vishal.l.verma@...el.com,
dave.jiang@...el.com, ira.weiny@...el.com, bwidawsk@...nel.org
Cc: linux-cxl@...r.kernel.org, linux-kernel@...r.kernel.org,
bhelgaas@...gle.com, rafael@...nel.org, lenb@...nel.org,
Jonathan.Cameron@...wei.com, dave@...olabs.net, rrichter@....com
Subject: Re: [PATCH 3/5] cxl/pci: Discover and cache pointer to RCD dport's
CXL RAS registers
On 10/22/22 17:44, Dan Williams wrote:
> Terry Bowman wrote:
>> CXL RAS information resides in a RAS capability structure located in
>> CXL.cache and CXL.mem registers.[1] The RAS capability provides CXL
>> specific error information that can be helpful in debugging. This
>> information is not currently logged but needs to be logged during PCIe AER
>> error handling.
>>
>> Update the CXL driver to find and cache a pointer to the CXL RAS
>> capability. The RAS registers resides in the downport's component register
>> block. Note:RAS registers are not in the upport. The component registers
>> can be found by first using the RCRB to goto the downport. Next, the
>> downport's 64-bit BAR[0] will point to the component register block.
>>
>> [1] CXL3.0 Spec, '8.2.5 CXL.cache and CXL.mem Registers'
>>
>> Signed-off-by: Terry Bowman <terry.bowman@....com>
>> ---
>> drivers/cxl/cxl.h | 4 +++
>> drivers/cxl/cxlmem.h | 1 +
>> drivers/cxl/pci.c | 72 ++++++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 77 insertions(+)
>>
>> diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
>> index 7d507ab80a78..69b50131ad86 100644
>> --- a/drivers/cxl/cxl.h
>> +++ b/drivers/cxl/cxl.h
>> @@ -36,6 +36,10 @@
>> #define CXL_CM_CAP_CAP_ID_HDM 0x5
>> #define CXL_CM_CAP_CAP_HDM_VERSION 1
>>
>> +/* CXL 3.0 8.2.4.2 CXL RAS Capability Header */
>> +#define CXL_CM_CAP_ID_RAS 0x2
>> +#define CXL_CM_CAP_SIZE_RAS 0x5C
>> +
>> /* HDM decoders CXL 2.0 8.2.5.12 CXL HDM Decoder Capability Structure */
>> #define CXL_HDM_DECODER_CAP_OFFSET 0x0
>> #define CXL_HDM_DECODER_COUNT_MASK GENMASK(3, 0)
>> diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
>> index 079db2e15acc..515273e224ea 100644
>> --- a/drivers/cxl/cxlmem.h
>> +++ b/drivers/cxl/cxlmem.h
>> @@ -243,6 +243,7 @@ struct cxl_dev_state {
>> u64 next_persistent_bytes;
>>
>> struct cxl_register_map aer_map;
>> + struct cxl_register_map ras_map;
>>
>> resource_size_t component_reg_phys;
>> u64 serial;
>> diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
>> index 2287b5225862..7f717fb47a36 100644
>> --- a/drivers/cxl/pci.c
>> +++ b/drivers/cxl/pci.c
>> @@ -586,6 +586,78 @@ void cxl_pci_aer_init(struct cxl_memdev *cxlmd)
>> }
>> EXPORT_SYMBOL_NS_GPL(cxl_pci_aer_init, CXL);
>>
>> +static resource_size_t cxl_get_dport_ras_base(struct cxl_memdev *cxlmd)
>> +{
>> + resource_size_t component_reg_phys, offset = 0;
>> + struct cxl_dev_state *cxlds = cxlmd->cxlds;
>> + void *cap_hdr_addr, *comp_reg_mapped;
>> + u32 cap_hdr, ras_cap_hdr;
>> + int cap_ndx;
>> +
>> + comp_reg_mapped = ioremap(cxlds->component_reg_phys +
>> + CXL_CM_OFFSET, CXL_COMPONENT_REG_BLOCK_SIZE);
>> + if (!comp_reg_mapped)
>> + return 0;
>> +
>> + cap_hdr_addr = comp_reg_mapped;
>> + cap_hdr = readl(cap_hdr_addr);
>> + for (cap_ndx = 0;
>> + cap_ndx < FIELD_GET(CXL_CM_CAP_HDR_ARRAY_SIZE_MASK, cap_hdr);
>> + cap_ndx++) {
>> + ras_cap_hdr = readl(cap_hdr_addr + cap_ndx*sizeof(u32));
>> +
>> + if (FIELD_GET(CXL_CM_CAP_HDR_ID_MASK, ras_cap_hdr) == CXL_CM_CAP_ID_RAS) {
>> + pr_debug("RAS cap header = %X @ %pa, cap_ndx = %d\n",
>> + ras_cap_hdr, cap_hdr_addr, cap_ndx);
>> + break;
>> + }
>> + }
>> +
>> + offset = CXL_CM_OFFSET + PCI_EXT_CAP_NEXT(ras_cap_hdr);
>> +
>> + iounmap(comp_reg_mapped);
>> +
>> + if (FIELD_GET(CXL_CM_CAP_HDR_ID_MASK, ras_cap_hdr) != CXL_CM_CAP_ID_RAS)
>> + return 0;
>> +
>> + pr_debug("Found RAS capability @ %llX (%X)\n",
>> + component_reg_phys + offset, *((u32 *)(comp_reg_mapped + offset)));
>> +
>> + return component_reg_phys + offset;
>
> For the RAS capability in the cxl_pci device this patch needs to be
> reconciled with this effort:
>
> https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore.kernel.org%2Flinux-cxl%2F166336972295.3803215.1047199449525031921.stgit%40djiang5-desk3.ch.intel.com%2F&data=05%7C01%7Cterry.bowman%40amd.com%7C33092f731a854d7a9a5b08dab47f1075%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C638020755070581692%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=84oOACCwh4XtndFKOUV%2FltpJjFnp4lsFQgw75UMphHQ%3D&reserved=0
>
> I think we will want RCD and VH RAS capability reporting to happen in
> the same place, and that can not be cxl_pci because cxl_pci has no way
> to find the RAS registers on its own. It needs the help from cxl_mem to
> do the upstream cxl_port associtation first.
>
> Given CXL switches will have their own RAS capabilities to report it
> feels like the cxl_port driver is where all of this should be
> centralized.
>
>
I'm working on merging the patchsets now.
I'm merging the following:
Dave Jiang's onto 6.1.0-rc1+, provides RAS mapping.
Roberts series ontop of Dave's, provides RCD discovery.
And this patchset ontop of Robert's, provides AER and RAS logging
Regards,
Terry
>> +}
>> +
>> +static int cxl_setup_dport_ras(struct cxl_memdev *cxlmd, resource_size_t resource)
>> +{
>> + struct cxl_register_map *map = &cxlmd->cxlds->ras_map;
>> + struct pci_dev *pdev = to_pci_dev(&cxlmd->dev);
>> +
>> + if (!resource) {
>> + pr_err("%s():%d: RAS resource ptr is NULL\n", __func__, __LINE__);
>> + return -EINVAL;
>> + }
>> +
>> + map->base = devm_cxl_iomap_block(&pdev->dev, resource, CXL_CM_CAP_SIZE_RAS);
>> + if (!map->base)
>> + return -ENOMEM;
>> +
>> + return 0;
>> +}
>> +
>> +void cxl_pci_ras_init(struct cxl_memdev *cxlmd)
>> +{
>> + resource_size_t cap;
>> +
>> + /*
>> + * TODO - CXL2.0 will need change to support PCI config space.
>> + */
>> + if (!is_rcd(cxlmd))
>> + return;
>> +
>> + cap = cxl_get_dport_ras_base(cxlmd);
>> + cxl_setup_dport_ras(cxlmd, cap);
>> +}
>> +EXPORT_SYMBOL_NS_GPL(cxl_pci_ras_init, CXL);
>> +
>> static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>> {
>> struct cxl_register_map map;
>> --
>> 2.34.1
>>
>
>
Powered by blists - more mailing lists