| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221027204347.529913-30-dima@arista.com>
Date: Thu, 27 Oct 2022 21:43:40 +0100
From: Dmitry Safonov <dima@...sta.com>
To: linux-kernel@...r.kernel.org, David Ahern <dsahern@...nel.org>,
Eric Dumazet <edumazet@...gle.com>
Cc: Dmitry Safonov <dima@...sta.com>,
Andy Lutomirski <luto@...capital.net>,
Ard Biesheuvel <ardb@...nel.org>,
Bob Gilligan <gilligan@...sta.com>,
Dan Carpenter <dan.carpenter@...cle.com>,
"David S. Miller" <davem@...emloft.net>,
Dmitry Safonov <0x7f454c46@...il.com>,
Eric Biggers <ebiggers@...nel.org>,
"Eric W. Biederman" <ebiederm@...ssion.com>,
Francesco Ruggeri <fruggeri@...sta.com>,
Herbert Xu <herbert@...dor.apana.org.au>,
Hideaki YOSHIFUJI <yoshfuji@...ux-ipv6.org>,
Ivan Delalande <colona@...sta.com>,
Jakub Kicinski <kuba@...nel.org>,
Leonard Crestez <cdleonard@...il.com>,
Paolo Abeni <pabeni@...hat.com>,
Salam Noureddine <noureddine@...sta.com>,
Shuah Khan <shuah@...nel.org>, netdev@...r.kernel.org,
linux-crypto@...r.kernel.org
Subject: [PATCH v3 29/36] selftest/tcp-ao: Add a test for MKT matching
Add TCP-AO tests on connect()/accept() pair.
SNMP counters exposed by kernel are very useful here to verify the
expected behavior of TCP-AO.
Signed-off-by: Dmitry Safonov <dima@...sta.com>
---
tools/testing/selftests/net/tcp_ao/Makefile | 2 +-
.../selftests/net/tcp_ao/connect-deny.c | 217 ++++++++++++++++++
2 files changed, 218 insertions(+), 1 deletion(-)
create mode 100644 tools/testing/selftests/net/tcp_ao/connect-deny.c
diff --git a/tools/testing/selftests/net/tcp_ao/Makefile b/tools/testing/selftests/net/tcp_ao/Makefile
index a178bde0af08..5064e34ebe38 100644
--- a/tools/testing/selftests/net/tcp_ao/Makefile
+++ b/tools/testing/selftests/net/tcp_ao/Makefile
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-TEST_BOTH_AF := connect icmps-discard icmps-accept
+TEST_BOTH_AF := connect icmps-discard icmps-accept connect-deny
TEST_IPV4_PROGS := $(TEST_BOTH_AF:%=%_ipv4)
TEST_IPV6_PROGS := $(TEST_BOTH_AF:%=%_ipv6)
diff --git a/tools/testing/selftests/net/tcp_ao/connect-deny.c b/tools/testing/selftests/net/tcp_ao/connect-deny.c
new file mode 100644
index 000000000000..8f1b067e611f
--- /dev/null
+++ b/tools/testing/selftests/net/tcp_ao/connect-deny.c
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Author: Dmitry Safonov <dima@...sta.com> */
+#include <inttypes.h>
+#include "aolib.h"
+
+typedef uint8_t fault_t;
+#define F_TIMEOUT 1
+#define F_KEYREJECT 2
+
+#define fault(type) (inj == type)
+
+static void try_accept(const char *tst_name, unsigned int port, const char *pwd,
+ union tcp_addr addr, uint8_t prefix,
+ uint8_t sndid, uint8_t rcvid, const char *cnt_name,
+ fault_t inj)
+{
+ uint64_t before_cnt, after_cnt;
+ int lsk, err, sk = 0;
+ time_t timeout;
+
+ lsk = test_listen_socket(this_ip_addr, port, 1);
+
+ if (pwd && test_set_ao(lsk, pwd, 0, addr, prefix, sndid, rcvid))
+ test_error("setsockopt(TCP_AO)");
+
+ if (cnt_name)
+ before_cnt = netstat_get_one(cnt_name, NULL);
+
+ synchronize_threads(); /* preparations done */
+
+ timeout = fault(F_TIMEOUT) ? TEST_RETRANSMIT_SEC : TEST_TIMEOUT_SEC;
+ err = test_wait_fd(lsk, timeout, 0);
+ if (err < 0)
+ test_error("test_wait_fd()");
+ else if (!err) {
+ if (!fault(F_TIMEOUT))
+ test_fail("timeouted for accept()");
+ } else {
+ if (fault(F_TIMEOUT))
+ test_fail("ready to accept");
+
+ sk = accept(lsk, NULL, NULL);
+ if (sk < 0) {
+ test_error("accept()");
+ } else {
+ if (fault(F_TIMEOUT))
+ test_fail("%s: accepted", tst_name);
+ }
+ }
+
+ close(lsk);
+
+ if (!cnt_name)
+ goto out;
+
+ after_cnt = netstat_get_one(cnt_name, NULL);
+
+ if (after_cnt <= before_cnt) {
+ test_fail("%s: %s counter did not increase: %zu <= %zu",
+ tst_name, cnt_name, after_cnt, before_cnt);
+ } else {
+ test_ok("%s: counter %s increased %zu => %zu",
+ tst_name, cnt_name, before_cnt, after_cnt);
+ }
+
+out:
+ synchronize_threads(); /* close() */
+ if (sk > 0)
+ close(sk);
+}
+
+static void *server_fn(void *arg)
+{
+ union tcp_addr wrong_addr, network_addr;
+ unsigned int port = test_server_port;
+
+ if (inet_pton(TEST_FAMILY, TEST_WRONG_IP, &wrong_addr) != 1)
+ test_error("Can't convert ip address %s", TEST_WRONG_IP);
+
+ try_accept("Non-AO server + AO client", port++, NULL,
+ this_ip_dest, -1, 100, 100, "TCPAOKeyNotFound", F_TIMEOUT);
+
+ try_accept("AO server + Non-AO client", port++, "password",
+ this_ip_dest, -1, 100, 100, "TCPAORequired", F_TIMEOUT);
+
+ try_accept("Wrong password", port++, "password2",
+ this_ip_dest, -1, 100, 100, "TCPAOBad", F_TIMEOUT);
+
+ try_accept("Wrong rcv id", port++, "password",
+ this_ip_dest, -1, 100, 101, "TCPAOKeyNotFound", F_TIMEOUT);
+
+ try_accept("Wrong snd id", port++, "password",
+ this_ip_dest, -1, 101, 100, "TCPAOGood", F_TIMEOUT);
+
+ try_accept("Server: Wrong addr", port++, "password",
+ wrong_addr, -1, 100, 100, "TCPAOKeyNotFound", F_TIMEOUT);
+
+ try_accept("Client: Wrong addr", port++, NULL,
+ this_ip_dest, -1, 100, 100, NULL, F_TIMEOUT);
+
+ try_accept("rcv id != snd id", port++, "password",
+ this_ip_dest, -1, 200, 100, "TCPAOGood", 0);
+
+ if (inet_pton(TEST_FAMILY, TEST_NETWORK, &network_addr) != 1)
+ test_error("Can't convert ip address %s", TEST_NETWORK);
+
+ try_accept("Server: prefix match", port++, "password",
+ network_addr, 16, 100, 100, "TCPAOGood", 0);
+
+ try_accept("Client: prefix match", port++, "password",
+ this_ip_dest, -1, 100, 100, "TCPAOGood", 0);
+
+ /* client exits */
+ synchronize_threads();
+ return NULL;
+}
+
+static void try_connect(const char *tst_name, unsigned int port,
+ const char *pwd, union tcp_addr addr, uint8_t prefix,
+ uint8_t sndid, uint8_t rcvid, fault_t inj)
+{
+ time_t timeout;
+ int sk, ret;
+
+ sk = socket(test_family, SOCK_STREAM, IPPROTO_TCP);
+ if (sk < 0)
+ test_error("socket()");
+
+ if (pwd && test_set_ao(sk, pwd, 0, addr, prefix, sndid, rcvid))
+ test_error("setsockopt(TCP_AO)");
+
+ synchronize_threads(); /* preparations done */
+
+ timeout = fault(F_TIMEOUT) ? TEST_RETRANSMIT_SEC : TEST_TIMEOUT_SEC;
+ ret = _test_connect_socket(sk, this_ip_dest, port, timeout);
+
+ if (ret < 0) {
+ if (fault(F_KEYREJECT) && ret == -EKEYREJECTED) {
+ test_ok("%s: connect() was prevented", tst_name);
+ goto out;
+ } else if (ret == -ECONNREFUSED &&
+ (fault(F_TIMEOUT) || fault(F_KEYREJECT))) {
+ test_ok("%s: refused to connect", tst_name);
+ goto out;
+ } else {
+ test_error("%s: connect() returned %d", tst_name, ret);
+ }
+ }
+
+ if (ret == 0) {
+ if (fault(F_TIMEOUT))
+ test_ok("%s", tst_name);
+ else
+ test_fail("%s: failed to connect()", tst_name);
+ } else {
+ if (fault(F_TIMEOUT) || fault(F_KEYREJECT))
+ test_fail("%s: connected", tst_name);
+ else
+ test_ok("%s: connected", tst_name);
+ }
+
+out:
+ synchronize_threads(); /* close() */
+
+ if (ret > 0)
+ close(sk);
+}
+
+static void *client_fn(void *arg)
+{
+ union tcp_addr wrong_addr, network_addr;
+ unsigned int port = test_server_port;
+
+ if (inet_pton(TEST_FAMILY, TEST_WRONG_IP, &wrong_addr) != 1)
+ test_error("Can't convert ip address %s", TEST_WRONG_IP);
+
+ try_connect("Non-AO server + AO client", port++, "password",
+ this_ip_dest, -1, 100, 100, F_TIMEOUT);
+
+ try_connect("AO server + Non-AO client", port++, NULL,
+ this_ip_dest, -1, 100, 100, F_TIMEOUT);
+
+ try_connect("Wrong password", port++, "password",
+ this_ip_dest, -1, 100, 100, F_TIMEOUT);
+
+ try_connect("Wrong rcv id", port++, "password",
+ this_ip_dest, -1, 100, 100, F_TIMEOUT);
+
+ try_connect("Wrong snd id", port++, "password",
+ this_ip_dest, -1, 100, 100, F_TIMEOUT);
+
+ try_connect("Server: Wrong addr", port++, "password",
+ this_ip_dest, -1, 100, 100, F_TIMEOUT);
+
+ try_connect("Client: Wrong addr", port++, "password",
+ wrong_addr, -1, 100, 100, F_KEYREJECT);
+
+ try_connect("rcv id != snd id", port++, "password",
+ this_ip_dest, -1, 100, 200, 0);
+
+ if (inet_pton(TEST_FAMILY, TEST_NETWORK, &network_addr) != 1)
+ test_error("Can't convert ip address %s", TEST_NETWORK);
+
+ try_connect("Server: prefix match", port++, "password",
+ this_ip_dest, -1, 100, 100, 0);
+
+ try_connect("Client: prefix match", port++, "password",
+ network_addr, 16, 100, 100, 0);
+
+ return NULL;
+}
+
+int main(int argc, char *argv[])
+{
+ test_init(19, server_fn, client_fn);
+ return 0;
+}
--
2.38.1
Powered by blists - more mailing lists