| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221027103104.74576-1-prabhakar.mahadev-lad.rj@bp.renesas.com>
Date: Thu, 27 Oct 2022 11:31:00 +0100
From: Prabhakar <prabhakar.csengg@...il.com>
To: Sakari Ailus <sakari.ailus@...ux.intel.com>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
Jacopo Mondi <jacopo@...ndi.org>,
Niklas Söderlund <niklas.soderlund@...natech.se>,
Hans Verkuil <hverkuil-cisco@...all.nl>
Cc: Geert Uytterhoeven <geert+renesas@...der.be>,
linux-media@...r.kernel.org, devicetree@...r.kernel.org,
linux-renesas-soc@...r.kernel.org, linux-kernel@...r.kernel.org,
Prabhakar <prabhakar.csengg@...il.com>,
Biju Das <biju.das.jz@...renesas.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
Subject: [PATCH v4 0/4] Add driver for CSI2 and CRU modules found on Renesas RZ/G2L SoC
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
Hi All,
This patch series aims to add driver support to CRU module found
on Renesas RZ/G2L SoC.
The Camera Data Receiving Unit (CRU) consists of a MIPI CSI-2
block and an Image Processing block. The Image Processing block
can receive video data received from the external Digital Parallel
Interface or MIPI CSI-2 block, and perform appropriate image
processing for each.
More details:
* https://renesas.info/wiki/File:CRU.png
* https://www.renesas.com/document/mah/rzg2l-group-rzg2lc-group-users-manual-hardware-0?language=en&r=1467981
Currently the driver has been tested using yavta and Gstreamer
on RZ/G2L SMARC EVK using the ov5645 sensor on CSI2 interface
only.
root@...rc-rzg2l:~# media-ctl -p
Media controller API version 6.0.0
Media device information
------------------------
driver rzg2l_cru
model renesas,rzg2l-cru
serial
bus info platform:10830000.video
hw revision 0x0
driver version 6.0.0
Device topology
- entity 1: csi-10830400.csi2 (2 pads, 2 links)
type V4L2 subdev subtype Unknown flags 0
device node name /dev/v4l-subdev0
pad0: Sink
[fmt:UYVY8_1X16/320x240 field:none colorspace:srgb]
<- "ov5645 0-003c":0 [ENABLED,IMMUTABLE]
pad1: Source
[fmt:UYVY8_1X16/320x240 field:none colorspace:srgb]
-> "cru-ip-10830000.video":0 []
- entity 4: ov5645 0-003c (1 pad, 1 link)
type V4L2 subdev subtype Sensor flags 0
device node name /dev/v4l-subdev1
pad0: Source
[fmt:unknown/0x0
crop:(0,0)/1920x1080]
-> "csi-10830400.csi2":0 [ENABLED,IMMUTABLE]
- entity 8: cru-ip-10830000.video (2 pads, 2 links)
type V4L2 subdev subtype Unknown flags 0
device node name /dev/v4l-subdev2
pad0: Sink
[fmt:UYVY8_1X16/320x240 field:none colorspace:srgb]
<- "csi-10830400.csi2":1 []
pad1: Source
[fmt:UYVY8_1X16/320x240 field:none colorspace:srgb]
-> "CRU output":0 []
- entity 17: CRU output (1 pad, 1 link)
type Node subtype V4L flags 0
device node name /dev/video0
pad0: Sink
<- "cru-ip-10830000.video":1 []
root@...rc-rzg2l:~# v4l2-compliance -s
v4l2-compliance 1.22.1-4864, 64 bits, 64-bit time_t
v4l2-compliance SHA: 47c8c377cf29 2021-10-23 15:12:35
Compliance test for rzg2l_cru device /dev/video0:
Driver Info:
Driver name : rzg2l_cru
Card type [ 116.765448] rzg2l-cru 10830000.video: ================= START STATUS =================
: RZG2L_CRU
[ 116.775369] rzg2l-cru 10830000.video: ================== END STATUS ==================
Bus info : platform:10830000.video
Driver version : 6.0.0
Capabilities : 0xa4200001
Video Capture
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x24200001
Video Capture
Streaming
Extended Pix Format
Media Driver Info:
Driver name : rzg2l_cru
Model : renesas,rzg2l-cru
Serial :
Bus info : platform:10830000.video
Media version : 6.0.0
Hardware revision: 0x00000000 (0)
Driver version : 6.0.0
Interface Info:
ID : 0x03000013
Type : V4L Video
Entity Info:
ID : 0x00000011 (17)
Name : CRU output
Function : V4L2 I/O
Pad 0x01000012 : 0: Sink
Link 0x02000017: from remote pad 0x100000a of entity 'cru-ip-10830000.video' (Video Pixel Formatter): Data, Enabled
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
test VIDIOC_QUERYCAP: OK
test invalid ioctls: OK
Allow for multiple opens:
test second /dev/video0 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 1 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls (Input 0):
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
test VIDIOC_QUERYCTRL: OK (Not Supported)
test VIDIOC_G/S_CTRL: OK (Not Supported)
test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Format ioctls (Input 0):
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK
Codec ioctls (Input 0):
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls (Input 0):
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
test Requests: OK (Not Supported)
Test input 0:
Streaming ioctls:
test read/write: OK (Not Supported)
test blocking wait: OK
test MMAP (no poll): OK
test MMAP (select): OK
test MMAP (epoll): OK
test USERPTR (no poll): OK (Not Supported)
test USERPTR (select): OK (Not Supported)
test DMABUF: Cannot test, specify --expbuf-device
Total for rzg2l_cru device /dev/video0: 53, Succeeded: 53, Failed: 0, Warnings: 0
root@...rc-rzg2l:~#
v3 -> v4
* Included RB tag from Rob for binding patch
* Implemented post_streamoff callback in CSI driver
* Undo the configuration if s_stream(1) fails
* Made sure we call post_streamoff in the error path if s_stream(1) failed
v2 -> v3:
* Updated clock names in DT binding doc
* Included presetn reset signal and added reset-names in CSI binding
* Renamed csi20 -> csi in DT binding doc
* Included RB tag from Krzysztof for patch#1
* Switched to runtime PM for both CSI and CRU drivers
* Implemented pre_streamon callback in CSI driver
* Got rid of rzg2l_csi2_cmn_rstb_deassert()/
rzg2l_csi2_dphy_setting/rzg2l_csi2_mipi_link_setting() from CSI driver
* Switched to for-loop instead of if block for getting CSI timings
* Fixed rzg2l_csi2_set_format() as pointed by Laurent
* Copied all colorspace-related fields received from userspace (colorspace,
xfer_func, ycbcr_enc and quantization) in rzg2l_csi2_set_format.
* Initialised pad in rzg2l_csi2_init_config()
* Introduced RZG2L_CSI2_DEFAULT_WIDTH/HEIGHT/FMT macros
* Dropped RZG2L_CSI2_SOURCE_VC0-RZG2L_CSI2_SOURCE_VC3 macros
* Modeled CRU IP block as a subdev
* Dropped explicitly selecting VIDEO_RZG2L_CSI2 for VIDEO_RZG2L_CRU config
* Replaced v4l2_dev_to_cru macro with inline function notifier_to_cru()
* Dropped id parameter from rvin_mc_parse_of()
* Renamed rzg2l_cru_csi2_init() -> rzg2l_cru_media_init()
* Used dev_err_probe() in rzg2l_cru_probe()
* Replaced devm_reset_control_get() -> devm_reset_control_get_exclusive()
* Prefixed HW_BUFFER_MAX and HW_BUFFER_DEFAULT macros with RZG2L_CRU_
* Moved asserting presetn signal from rzg2l_cru_dma_register() to rzg2l_cru_start_streaming_vq()
* Dropped VB2_READ from VB2 io_modes
* Used dev_dbg() in rzg2l_cru_video_register() and rzg2l_cru_video_unregister()
* Got rid of rzg2l_cru_notify()
* Dropped V4L2_CAP_READWRITE from device caps
* Introduced rzg2l_cru_v4l2_init() for initialization.
* Got rid v4l2_pipeline_pm_get() and used PM in ov5645 sensor driver. Patch posted
https://patchwork.linuxtv.org/project/linux-media/patch/20220927201634.750141-1-prabhakar.mahadev-lad.rj@bp.renesas.com/
v1 -> v2:
* Dropped media prefix from subject
* Renamed node name csi20 -> csi
* Used 4 spaces for indentation in example node
* Dropped reset-names and interrupt-names properties
* Dropped oneOf from compatible
* Included RB tags from Laurent
* Marked port0/1 as required for cru node
* Sorted Kconfig select
* Prefixed generic names for struct/variables with rzg2_csi2
* Dropped unnecessary checks for remote source
* Dropped exporting functions
* Moved lane validation to probe
* Split up rzg2l_csi2_dphy_setting() and rzg2l_csi2_mipi_link_setting()
* Used rzg2l_csi2_write() wherever possible
* Dropped stream_count/lock members from csi2 struct
* Used active subdev state instead of manually storing format in driver
* Implemented init_cfg/enum_frame_size/enum_mbus_code callbacks
* Dropped check for bus_type of remote source
* Switched to manually turning ON/OFF the clocks instead of pm_runtime so that
the mipi/dhpy initialization happens as per the HW manual
* Hardcoded VC0 usage for now as streams API is under development
v1:
- https://patchwork.kernel.org/project/linux-renesas-soc/cover/20220801214718.16943-1-prabhakar.mahadev-lad.rj@bp.renesas.com/
RFC v2:
- https://patchwork.kernel.org/project/linux-renesas-soc/cover/20220121010543.31385-1-prabhakar.mahadev-lad.rj@bp.renesas.com/
RFC v1:
- https://patchwork.kernel.org/project/linux-renesas-soc/cover/20211207012351.15754-1-prabhakar.mahadev-lad.rj@bp.renesas.com/
Cheers,
Prabhakar
Lad Prabhakar (4):
media: dt-bindings: Document Renesas RZ/G2L CSI-2 block
media: dt-bindings: Document Renesas RZ/G2L CRU block
media: platform: Add Renesas RZ/G2L MIPI CSI-2 receiver driver
media: platform: Add Renesas RZ/G2L CRU driver
.../bindings/media/renesas,rzg2l-cru.yaml | 157 +++
.../bindings/media/renesas,rzg2l-csi2.yaml | 149 +++
drivers/media/platform/renesas/Kconfig | 1 +
drivers/media/platform/renesas/Makefile | 1 +
.../media/platform/renesas/rzg2l-cru/Kconfig | 33 +
.../media/platform/renesas/rzg2l-cru/Makefile | 6 +
.../platform/renesas/rzg2l-cru/rzg2l-core.c | 372 ++++++
.../platform/renesas/rzg2l-cru/rzg2l-cru.h | 163 +++
.../platform/renesas/rzg2l-cru/rzg2l-csi2.c | 869 +++++++++++++
.../platform/renesas/rzg2l-cru/rzg2l-ip.c | 277 +++++
.../platform/renesas/rzg2l-cru/rzg2l-video.c | 1087 +++++++++++++++++
11 files changed, 3115 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
create mode 100644 Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
create mode 100644 drivers/media/platform/renesas/rzg2l-cru/Kconfig
create mode 100644 drivers/media/platform/renesas/rzg2l-cru/Makefile
create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-core.c
create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-cru.h
create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-csi2.c
create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-ip.c
create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-video.c
--
2.25.1
Powered by blists - more mailing lists