linux-kernel - [PATCH RESEND v2 10/13] dt-bindings: phy: qcom,qmp-usb: rename current bindings

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 28 Oct 2022 18:04:32 +0200
From:   Johan Hovold <johan+linaro@...nel.org>
To:     Vinod Koul <vkoul@...nel.org>
Cc:     Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konrad.dybcio@...ainline.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
        linux-arm-msm@...r.kernel.org, linux-phy@...ts.infradead.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        Johan Hovold <johan+linaro@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH RESEND v2 10/13] dt-bindings: phy: qcom,qmp-usb: rename current bindings

The current QMP USB PHY bindings are based on the original MSM8996
binding which provided multiple PHYs per IP block and these in turn were
described by child nodes.

Later QMP USB PHY blocks only provide a single PHY and the remnant child
node does not really reflect the hardware.

The original MSM8996 binding also ended up describing the individual
register blocks as belonging to either the wrapper node or the PHY child
nodes.

This is an unnecessary level of detail which has lead to problems when
later IP blocks using different register layouts have been forced to fit
the original mould rather than updating the binding. The bindings are
arguable also incomplete as they only the describe register blocks used
by the current Linux drivers (e.g. does not include the per lane PCS
registers).

In preparation for adding new bindings for SC8280XP which further
bindings can be based on, rename the current bindings after MSM8996 and
add a reference to the SC8280XP bindings.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Signed-off-by: Johan Hovold <johan+linaro@...nel.org>
---
 ...com,qmp-usb-phy.yaml => qcom,msm8996-qmp-usb3-phy.yaml} | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
 rename Documentation/devicetree/bindings/phy/{qcom,qmp-usb-phy.yaml => qcom,msm8996-qmp-usb3-phy.yaml} (97%)

diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-usb-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml
similarity index 97%
rename from Documentation/devicetree/bindings/phy/qcom,qmp-usb-phy.yaml
rename to Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml
index 7acb4b7de7f9..58ac84de8eee 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qmp-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/phy/qcom,qmp-usb-phy.yaml#
+$id: http://devicetree.org/schemas/phy/qcom,msm8996-qmp-usb3-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm QMP PHY controller (USB)
+title: Qualcomm QMP PHY controller (USB, MSM8996)
 
 maintainers:
   - Vinod Koul <vkoul@...nel.org>
@@ -13,6 +13,9 @@ description:
   QMP PHY controller supports physical layer functionality for a number of
   controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
 
+  Note that these bindings are for SoCs up to SC8180X. For newer SoCs, see
+  qcom,sc8280xp-qmp-usb3-uni-phy.yaml.
+
 properties:
   compatible:
     enum:
-- 
2.37.3