[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <Y1ueEYJk2epT/g4J@kroah.com>
Date: Fri, 28 Oct 2022 11:17:05 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: Neal Liu <neal_liu@...eedtech.com>
Cc: Lei Yu <yulei.sh@...edance.com>, Felipe Balbi <balbi@...nel.org>,
Joel Stanley <joel@....id.au>,
Andrew Jeffery <andrew@...id.au>,
Henry Tian <tianxiaofeng@...edance.com>,
Jakob Koschel <jakobkoschel@...il.com>,
"linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-aspeed@...ts.ozlabs.org" <linux-aspeed@...ts.ozlabs.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Ryan Chen <ryan_chen@...eedtech.com>
Subject: Re: [PATCH] usb: gadget: aspeed: fix buffer overflow
On Fri, Oct 28, 2022 at 09:04:52AM +0000, Neal Liu wrote:
> > > Thanks for your feedback.
> > > I tried to reproduce it on my side, and it cannot be reproduce it.
> > > Here are my test sequences:
> > > 1. emulate one of the vhub port to usb ethernet through Linux gadget
> > > (ncm)
> >
> > We are using rndis instead of ncm.
> >
> > > 2. connect BMC vhub to Host
> > > 3. BMC & Host can ping each other (both usb eth dev default mtu is
> > > 1500) 4. Set BMC mtu to 1000 (Host OS cannot set usb eth dev mtu to
> > > 2000, it's maxmtu is 1500)
> >
> > Not sure if it's related, but in my case (USB rndis, Debian 10 OS) it should be
> > able to set MTU to 2000.
>
> Using rndis is able to set MTU to 2000, and the issue can be reproduced.
Please NEVER use rndis anymore. I need to go just delete that driver
from the tree.
It is insecure-by-design and will cause any system that runs it to be
instantly compromised and it can not be fixed. Never trust it.
Even for data throughput tests, I wouldn't trust it as it does odd
things with packet sizes as you show here.
thanks,
greg k-h
Powered by blists - more mailing lists