[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20221028135150.6rkih4d67trs23h4@baldur>
Date: Fri, 28 Oct 2022 08:51:51 -0500
From: Bjorn Andersson <andersson@...nel.org>
To: Robert Foss <robert.foss@...aro.org>
Cc: agross@...nel.org, bjorn.andersson@...aro.org,
konrad.dybcio@...ainline.org, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, robdclark@...il.com,
quic_abhinavk@...cinc.com, dmitry.baryshkov@...aro.org,
sean@...rly.run, airlied@...ux.ie, daniel@...ll.ch,
quic_kalyant@...cinc.com, swboyd@...omium.org,
angelogioacchino.delregno@...ainline.org, loic.poulain@...aro.org,
quic_vpolimer@...cinc.com, vkoul@...nel.org, dianders@...omium.org,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, dri-devel@...ts.freedesktop.org,
freedreno@...ts.freedesktop.org,
Jonathan Marek <jonathan@...ek.ca>, vinod.koul@...aro.org,
quic_jesszhan@...cinc.com
Subject: Re: [PATCH v1 8/9] arm64: dts: qcom: sm8350-hdk: Enable display &
dsi nodes
On Fri, Oct 28, 2022 at 02:08:11PM +0200, Robert Foss wrote:
> Enable the display subsystem and the dsi0 output for
> the sm8350-hdk board.
>
> Signed-off-by: Robert Foss <robert.foss@...aro.org>
> ---
> arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> index e6deb08c6da0..6e07feb4b3b2 100644
> --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> @@ -213,10 +213,32 @@ &cdsp {
> firmware-name = "qcom/sm8350/cdsp.mbn";
> };
>
> +&dispcc {
> + status = "okay";
> +};
> +
> +&dsi0 {
If you prefix the label for the dsi controller and phy with mdss_ they
sort nicely together with the other display nodes.
Regards,
Bjorn
> + status = "okay";
> + vdda-supply = <&vreg_l6b_1p2>;
> +};
> +
> +&dsi0_phy {
> + status = "okay";
> + vdds-supply = <&vreg_l5b_0p88>;
> +};
> +
> &gpi_dma1 {
> status = "okay";
> };
>
> +&mdss {
> + status = "okay";
> +};
> +
> +&mdss_mdp {
> + status = "okay";
> +};
> +
> &mpss {
> status = "okay";
> firmware-name = "qcom/sm8350/modem.mbn";
> --
> 2.34.1
>
Powered by blists - more mailing lists