lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <b7bac0b3-3c91-1026-d435-6b5e9d6492f3@gmail.com>
Date:   Fri, 28 Oct 2022 16:41:45 +0200
From:   Johan Jonker <jbx6244@...il.com>
To:     kever.yang@...k-chips.com, heiko@...ech.de
Cc:     sjg@...omium.org, philipp.tomsich@...ll.eu,
        zhangqing@...k-chips.com, hjc@...k-chips.com, robh+dt@...nel.org,
        krzysztof.kozlowski+dt@...aro.org, daniel.lezcano@...aro.org,
        tglx@...utronix.de, arnd@...db.de, olof@...om.net, soc@...nel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        linux-rockchip@...ts.infradead.org
Subject: [PATCH v2 3/4] ARM: dts: rockchip: add rk3128.dtsi

Add basic rk3128 support.

Features:
  Quad-core ARM Cortex-A7MP Core processor
  Clock & reset unit
  Power management unit
  Interrupt controller
  DMAC
  6x 64 bits Timers
  4x PWMs
  1x 32 bits watchdog

Internal memory:
  Internal BootRom
  Internal SRAM 8KB

External memory:
  Dynamic Memory Interface (DDR3/DDR3L/LPDDR2)
  Nand Flash Interface
  eMMC Interface
  SD/MMC Interface

Connectivity:
  SDIO interface
  SPI Controller
  3x UART controller
  4x I2C controllers
  4x groups of GPIO (GPIO0~GPIO3), 32 GPIOs per group
  USB Host2.0
  USB OTG2.0

Signed-off-by: Johan Jonker <jbx6244@...il.com>
---

NOT TESTED WITH HARDWARE
NO THERMAL PROTECTION

---

Changed V2:
  remove aliases
  add gic interrupts mask defines
  add virtual timer interrupts
---
 arch/arm/boot/dts/rk3128.dtsi | 916 ++++++++++++++++++++++++++++++++++
 1 file changed, 916 insertions(+)
 create mode 100644 arch/arm/boot/dts/rk3128.dtsi

diff --git a/arch/arm/boot/dts/rk3128.dtsi b/arch/arm/boot/dts/rk3128.dtsi
new file mode 100644
index 000000000..0480144c1
--- /dev/null
+++ b/arch/arm/boot/dts/rk3128.dtsi
@@ -0,0 +1,916 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd
+ */
+
+#include <dt-bindings/clock/rk3128-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+/ {
+	compatible = "rockchip,rk3128";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@f00 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf00>;
+			clock-latency = <40000>;
+			clocks = <&cru ARMCLK>;
+			operating-points = <
+				/* KHz    uV */
+				 816000 1000000
+			>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu1: cpu@f01 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf01>;
+		};
+
+		cpu2: cpu@f02 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf02>;
+		};
+
+		cpu3: cpu@f03 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf03>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		arm,cpu-registers-not-fw-configured;
+		clock-frequency = <24000000>;
+	};
+
+	xin24m: oscillator {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	pmu: syscon@...a0000 {
+		compatible = "rockchip,rk3128-pmu", "syscon", "simple-mfd";
+		reg = <0x100a0000 0x1000>;
+	};
+
+	gic: interrupt-controller@...39000 {
+		compatible = "arm,cortex-a7-gic";
+		reg = <0x10139000 0x1000>,
+		      <0x1013a000 0x1000>,
+		      <0x1013c000 0x2000>,
+		      <0x1013e000 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+	};
+
+	usb_otg: usb@...80000 {
+		compatible = "rockchip,rk3128-usb", "rockchip,rk3066-usb", "snps,dwc2";
+		reg = <0x10180000 0x40000>;
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG>;
+		clock-names = "otg";
+		dr_mode = "otg";
+		phys = <&usb2phy_otg>;
+		phy-names = "usb2-phy";
+		status = "disabled";
+	};
+
+	usb_host_ehci: usb@...c0000 {
+		compatible = "generic-ehci";
+		reg = <0x101c0000 0x20000>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		phys = <&usb2phy_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host_ohci: usb@...e0000 {
+		compatible = "generic-ohci";
+		reg = <0x101e0000 0x20000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		phys = <&usb2phy_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	sdmmc: mmc@...14000 {
+		compatible = "rockchip,rk3128-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x10214000 0x4000>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		dmas = <&pdma 10>;
+		dma-names = "rx-tx";
+		fifo-depth = <256>;
+		max-frequency = <150000000>;
+		resets = <&cru SRST_SDMMC>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	sdio: mmc@...18000 {
+		compatible = "rockchip,rk3128-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x10218000 0x4000>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		dmas = <&pdma 11>;
+		dma-names = "rx-tx";
+		fifo-depth = <256>;
+		max-frequency = <150000000>;
+		resets = <&cru SRST_SDIO>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	emmc: mmc@...1c000 {
+		compatible = "rockchip,rk3128-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x1021c000 0x4000>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		dmas = <&pdma 12>;
+		dma-names = "rx-tx";
+		fifo-depth = <256>;
+		max-frequency = <150000000>;
+		resets = <&cru SRST_EMMC>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	nfc: nand-controller@...00000 {
+		compatible = "rockchip,rk3128-nfc", "rockchip,rk2928-nfc";
+		reg = <0x10500000 0x4000>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>;
+		clock-names = "ahb", "nfc";
+		pinctrl-names = "default";
+		pinctrl-0 = <&flash_ale &flash_bus8 &flash_cle &flash_cs0
+			     &flash_dqs &flash_rdn &flash_rdy &flash_wrn>;
+		status = "disabled";
+	};
+
+	cru: clock-controller@...00000 {
+		compatible = "rockchip,rk3128-cru";
+		reg = <0x20000000 0x1000>;
+		clocks = <&xin24m>;
+		clock-names = "xin24m";
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		assigned-clocks = <&cru PLL_GPLL>;
+		assigned-clock-rates = <594000000>;
+	};
+
+	grf: syscon@...08000 {
+		compatible = "rockchip,rk3128-grf", "syscon", "simple-mfd";
+		reg = <0x20008000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		usb2phy: usb2phy@17c {
+			compatible = "rockchip,rk3128-usb2phy";
+			reg = <0x017c 0x0c>;
+			clocks = <&cru SCLK_OTGPHY0>;
+			clock-names = "phyclk";
+			clock-output-names = "usb480m_phy";
+			#clock-cells = <0>;
+			status = "disabled";
+
+			usb2phy_host: host-port {
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "linestate";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			usb2phy_otg: otg-port {
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "otg-bvalid", "otg-id",
+						  "linestate";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+	};
+
+	timer0: timer@...44000 {
+		compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer";
+		reg = <0x20044000 0x20>;
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_TIMER>, <&xin24m>;
+		clock-names = "pclk", "timer";
+	};
+
+	timer1: timer@...44020 {
+		compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer";
+		reg = <0x20044020 0x20>;
+		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_TIMER>, <&xin24m>;
+		clock-names = "pclk", "timer";
+	};
+
+	timer2: timer@...44040 {
+		compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer";
+		reg = <0x20044040 0x20>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_TIMER>, <&xin24m>;
+		clock-names = "pclk", "timer";
+	};
+
+	timer3: timer@...44060 {
+		compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer";
+		reg = <0x20044060 0x20>;
+		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_TIMER>, <&xin24m>;
+		clock-names = "pclk", "timer";
+	};
+
+	timer4: timer@...44080 {
+		compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer";
+		reg = <0x20044080 0x20>;
+		interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_TIMER>, <&xin24m>;
+		clock-names = "pclk", "timer";
+	};
+
+	timer5: timer@...440a0 {
+		compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer";
+		reg = <0x200440a0 0x20>;
+		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_TIMER>, <&xin24m>;
+		clock-names = "pclk", "timer";
+	};
+
+	watchdog: watchdog@...4c000 {
+		compatible = "rockchip,rk3128-wdt", "snps,dw-wdt";
+		reg = <0x2004c000 0x100>;
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_WDT>;
+		status = "disabled";
+	};
+
+	pwm0: pwm@...50000 {
+		compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
+		reg = <0x20050000 0x10>;
+		clocks = <&cru PCLK_PWM>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@...50010 {
+		compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
+		reg = <0x20050010 0x10>;
+		clocks = <&cru PCLK_PWM>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@...50020 {
+		compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
+		reg = <0x20050020 0x10>;
+		clocks = <&cru PCLK_PWM>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm2_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@...50030 {
+		compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
+		reg = <0x20050030 0x10>;
+		clocks = <&cru PCLK_PWM>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@...56000 {
+		compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
+		reg = <0x20056000 0x1000>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@...5a000 {
+		compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
+		reg = <0x2005a000 0x1000>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@...5e000 {
+		compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
+		reg = <0x2005e000 0x1000>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	uart0: serial@...60000 {
+		compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart";
+		reg = <0x20060000 0x100>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&pdma 2>, <&pdma 3>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart1: serial@...64000 {
+		compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart";
+		reg = <0x20064000 0x100>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&pdma 4>, <&pdma 5>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart2: serial@...68000 {
+		compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart";
+		reg = <0x20068000 0x100>;
+		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&pdma 6>, <&pdma 7>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2_xfer>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	saradc: saradc@...6c000 {
+		compatible = "rockchip,saradc";
+		reg = <0x2006c000 0x100>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
+		#io-channel-cells = <1>;
+		status = "disabled";
+	};
+
+	i2c0: i2c@...72000 {
+		compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
+		reg = <20072000 0x1000>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi0: spi@...74000 {
+		compatible = "rockchip,rk3128-spi", "rockchip,rk3066-spi";
+		reg = <0x20074000 0x1000>;
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&pdma 8>, <&pdma 9>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi0_tx &spi0_rx &spi0_clk &spi0_cs0 &spi0_cs1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	pdma: dma-controller@...78000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x20078000 0x4000>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+		arm,pl330-broken-no-flushp;
+		clocks = <&cru ACLK_DMAC>;
+		clock-names = "apb_pclk";
+		#dma-cells = <1>;
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3128-pinctrl";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio0: gpio@...7c000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x2007c000 0x100>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@...80000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20080000 0x100>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@...84000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20084000 0x100>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@...88000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20088000 0x100>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO3>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_default: pcfg-pull-default {
+			bias-pull-pin-default;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		emmc {
+			emmc_clk: emmc-clk {
+				rockchip,pins = <2 RK_PA7 2 &pcfg_pull_none>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins = <1 RK_PC6 2 &pcfg_pull_default>;
+			};
+
+			emmc_cmd1: emmc-cmd1 {
+				rockchip,pins = <2 RK_PA4 2 &pcfg_pull_default>;
+			};
+
+			emmc_pwr: emmc-pwr {
+				rockchip,pins = <2 RK_PA5 2 &pcfg_pull_default>;
+			};
+
+			emmc_bus1: emmc-bus1 {
+				rockchip,pins = <1 RK_PD0 2 &pcfg_pull_default>;
+			};
+
+			emmc_bus4: emmc-bus4 {
+				rockchip,pins = <1 RK_PD0 2 &pcfg_pull_default>,
+						<1 RK_PD1 2 &pcfg_pull_default>,
+						<1 RK_PD2 2 &pcfg_pull_default>,
+						<1 RK_PD3 2 &pcfg_pull_default>;
+			};
+
+			emmc_bus8: emmc-bus8 {
+				rockchip,pins = <1 RK_PD0 2 &pcfg_pull_default>,
+						<1 RK_PD1 2 &pcfg_pull_default>,
+						<1 RK_PD2 2 &pcfg_pull_default>,
+						<1 RK_PD3 2 &pcfg_pull_default>,
+						<1 RK_PD4 2 &pcfg_pull_default>,
+						<1 RK_PD5 2 &pcfg_pull_default>,
+						<1 RK_PD6 2 &pcfg_pull_default>,
+						<1 RK_PD7 2 &pcfg_pull_default>;
+			};
+		};
+
+		gmac {
+			rgmii_pins: rgmii-pins {
+				rockchip,pins = <2 RK_PB0 3 &pcfg_pull_default>,
+						<2 RK_PB1 3 &pcfg_pull_default>,
+						<2 RK_PB3 3 &pcfg_pull_default>,
+						<2 RK_PB4 3 &pcfg_pull_default>,
+						<2 RK_PB5 3 &pcfg_pull_default>,
+						<2 RK_PB6 3 &pcfg_pull_default>,
+						<2 RK_PC0 3 &pcfg_pull_default>,
+						<2 RK_PC1 3 &pcfg_pull_default>,
+						<2 RK_PC2 3 &pcfg_pull_default>,
+						<2 RK_PC3 3 &pcfg_pull_default>,
+						<2 RK_PD1 3 &pcfg_pull_default>,
+						<2 RK_PC4 4 &pcfg_pull_default>,
+						<2 RK_PC5 4 &pcfg_pull_default>,
+						<2 RK_PC6 4 &pcfg_pull_default>,
+						<2 RK_PC7 4 &pcfg_pull_default>;
+			};
+
+			rmii_pins: rmii-pins {
+				rockchip,pins = <2 RK_PB0 3 &pcfg_pull_default>,
+						<2 RK_PB4 3 &pcfg_pull_default>,
+						<2 RK_PB5 3 &pcfg_pull_default>,
+						<2 RK_PB6 3 &pcfg_pull_default>,
+						<2 RK_PB7 3 &pcfg_pull_default>,
+						<2 RK_PC0 3 &pcfg_pull_default>,
+						<2 RK_PC1 3 &pcfg_pull_default>,
+						<2 RK_PC2 3 &pcfg_pull_default>,
+						<2 RK_PC3 3 &pcfg_pull_default>,
+						<2 RK_PD1 3 &pcfg_pull_default>;
+			};
+		};
+
+		hdmi {
+			hdmii2c_xfer: hdmii2c-xfer {
+				rockchip,pins = <0 RK_PA6 2 &pcfg_pull_none>,
+						<0 RK_PA7 2 &pcfg_pull_none>;
+			};
+
+			hdmi_hpd: hdmi-hpd {
+				rockchip,pins = <0 RK_PB7 1 &pcfg_pull_none>;
+			};
+
+			hdmi_cec: hdmi-cec {
+				rockchip,pins = <0 RK_PC4 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>,
+						<0 RK_PA1 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins = <0 RK_PA2 1 &pcfg_pull_none>,
+						<0 RK_PA3 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c2 {
+			i2c2_xfer: i2c2-xfer {
+				rockchip,pins = <2 RK_PC4 3 &pcfg_pull_none>,
+						<2 RK_PC5 3 &pcfg_pull_none>;
+			};
+		};
+
+		i2c3 {
+			i2c3_xfer: i2c3-xfer {
+				rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>,
+						<0 RK_PA7 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2s {
+			i2s_bus: i2s-bus {
+				rockchip,pins = <0 RK_PB0 1 &pcfg_pull_none>,
+						<0 RK_PB1 1 &pcfg_pull_none>,
+						<0 RK_PB3 1 &pcfg_pull_none>,
+						<0 RK_PB4 1 &pcfg_pull_none>,
+						<0 RK_PB5 1 &pcfg_pull_none>,
+						<0 RK_PB6 1 &pcfg_pull_none>;
+			};
+
+			i2s1_bus: i2s1-bus {
+				rockchip,pins = <1 RK_PA0 1 &pcfg_pull_none>,
+						<1 RK_PA1 1 &pcfg_pull_none>,
+						<1 RK_PA2 1 &pcfg_pull_none>,
+						<1 RK_PA3 1 &pcfg_pull_none>,
+						<1 RK_PA4 1 &pcfg_pull_none>,
+						<1 RK_PA5 1 &pcfg_pull_none>;
+			};
+		};
+
+		lcdc {
+			lcdc_dclk: lcdc-dclk {
+				rockchip,pins = <2 RK_PB0 1 &pcfg_pull_none>;
+			};
+
+			lcdc_den: lcdc-den {
+				rockchip,pins = <2 RK_PB3 1 &pcfg_pull_none>;
+			};
+
+			lcdc_hsync: lcdc-hsync {
+				rockchip,pins = <2 RK_PB1 1 &pcfg_pull_none>;
+			};
+
+			lcdc_vsync: lcdc-vsync {
+				rockchip,pins = <2 RK_PB2 1 &pcfg_pull_none>;
+			};
+
+			lcdc_rgb24: lcdc-rgb24 {
+				rockchip,pins = <2 RK_PB4 1 &pcfg_pull_none>,
+						<2 RK_PB5 1 &pcfg_pull_none>,
+						<2 RK_PB6 1 &pcfg_pull_none>,
+						<2 RK_PB7 1 &pcfg_pull_none>,
+						<2 RK_PC0 1 &pcfg_pull_none>,
+						<2 RK_PC1 1 &pcfg_pull_none>,
+						<2 RK_PC2 1 &pcfg_pull_none>,
+						<2 RK_PC3 1 &pcfg_pull_none>,
+						<2 RK_PC4 1 &pcfg_pull_none>,
+						<2 RK_PC5 1 &pcfg_pull_none>,
+						<2 RK_PC6 1 &pcfg_pull_none>,
+						<2 RK_PC7 1 &pcfg_pull_none>,
+						<2 RK_PD0 1 &pcfg_pull_none>,
+						<2 RK_PD1 1 &pcfg_pull_none>;
+			};
+		};
+
+		nfc {
+			flash_ale:flash-ale {
+				rockchip,pins = <2 RK_PA0 1 &pcfg_pull_none>;
+			};
+
+			flash_cle:flash-cle {
+				rockchip,pins = <2 RK_PA1 1 &pcfg_pull_none>;
+			};
+
+			flash_wrn:flash-wrn {
+				rockchip,pins = <2 RK_PA2 1 &pcfg_pull_none>;
+			};
+
+			flash_rdn:flash-rdn {
+				rockchip,pins = <2 RK_PA3 1 &pcfg_pull_none>;
+			};
+
+			flash_rdy:flash-rdy {
+				rockchip,pins = <2 RK_PA4 1 &pcfg_pull_none>;
+			};
+
+			flash_cs0:flash-cs0 {
+				rockchip,pins = <2 RK_PA6 1 &pcfg_pull_none>;
+			};
+
+			flash_dqs:flash-dqs {
+				rockchip,pins = <2 RK_PA7 1 &pcfg_pull_none>;
+			};
+
+			flash_bus8: flash-bus8 {
+				rockchip,pins = <1 RK_PD0 1 &pcfg_pull_none>,
+						<1 RK_PD1 1 &pcfg_pull_none>,
+						<1 RK_PD2 1 &pcfg_pull_none>,
+						<1 RK_PD3 1 &pcfg_pull_none>,
+						<1 RK_PD4 1 &pcfg_pull_none>,
+						<1 RK_PD5 1 &pcfg_pull_none>,
+						<1 RK_PD6 1 &pcfg_pull_none>,
+						<1 RK_PD7 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins = <0 RK_PD2 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins = <0 RK_PD3 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm2 {
+			pwm2_pin: pwm2-pin {
+				rockchip,pins = <0 RK_PD4 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm3 {
+			pwm3_pin: pwm3-pin {
+				rockchip,pins = <3 RK_PD2 1 &pcfg_pull_none>;
+			};
+		};
+
+		sdio {
+			sdio_clk: sdio-clk {
+				rockchip,pins = <1 RK_PA0 2 &pcfg_pull_none>;
+			};
+
+			sdio_cmd: sdio-cmd {
+				rockchip,pins = <0 RK_PA3 2 &pcfg_pull_default>;
+			};
+
+			sdio_pwren: sdio-pwren {
+				rockchip,pins = <0 RK_PD6 1 &pcfg_pull_default>;
+			};
+
+			sdio_bus4: sdio-bus4 {
+				rockchip,pins = <1 RK_PA1 2 &pcfg_pull_default>,
+						<1 RK_PA2 2 &pcfg_pull_default>,
+						<1 RK_PA4 2 &pcfg_pull_default>,
+						<1 RK_PA5 2 &pcfg_pull_default>;
+			};
+		};
+
+		sdmmc {
+			sdmmc_clk: sdmmc-clk {
+				rockchip,pins = <1 RK_PC0 1 &pcfg_pull_none>;
+			};
+
+			sdmmc_cmd: sdmmc-cmd {
+				rockchip,pins = <1 RK_PB7 1 &pcfg_pull_default>;
+			};
+
+			sdmmc_wp: sdmmc-wp {
+				rockchip,pins = <1 RK_PA7 1 &pcfg_pull_default>;
+			};
+
+			sdmmc_pwren: sdmmc-pwren {
+				rockchip,pins = <1 RK_PB6 1 &pcfg_pull_default>;
+			};
+
+			sdmmc_bus4: sdmmc-bus4 {
+				rockchip,pins = <1 RK_PC2 1 &pcfg_pull_default>,
+						<1 RK_PC3 1 &pcfg_pull_default>,
+						<1 RK_PC4 1 &pcfg_pull_default>,
+						<1 RK_PC5 1 &pcfg_pull_default>;
+			};
+		};
+
+		spdif {
+			spdif_tx: spdif-tx {
+				rockchip,pins = <3 RK_PD3 1 &pcfg_pull_none>;
+			};
+		};
+
+		spi0 {
+			spi0_clk: spi0-clk {
+				rockchip,pins = <1 RK_PB0 1 &pcfg_pull_default>;
+			};
+
+			spi0_cs0: spi0-cs0 {
+				rockchip,pins = <1 RK_PB3 1 &pcfg_pull_default>;
+			};
+
+			spi0_tx: spi0-tx {
+				rockchip,pins = <1 RK_PB1 1 &pcfg_pull_default>;
+			};
+
+			spi0_rx: spi0-rx {
+				rockchip,pins = <1 RK_PB2 1 &pcfg_pull_default>;
+			};
+
+			spi0_cs1: spi0-cs1 {
+				rockchip,pins = <1 RK_PB4 1 &pcfg_pull_default>;
+			};
+
+			spi1_clk: spi1-clk {
+				rockchip,pins = <2 RK_PA0 2 &pcfg_pull_default>;
+			};
+
+			spi1_cs0: spi1-cs0 {
+				rockchip,pins = <1 RK_PD6 3 &pcfg_pull_default>;
+			};
+
+			spi1_tx: spi1-tx {
+				rockchip,pins = <1 RK_PD5 3 &pcfg_pull_default>;
+			};
+
+			spi1_rx: spi1-rx {
+				rockchip,pins = <1 RK_PD4 3 &pcfg_pull_default>;
+			};
+
+			spi1_cs1: spi1-cs1 {
+				rockchip,pins = <1 RK_PD7 3 &pcfg_pull_default>;
+			};
+
+			spi2_clk: spi2-clk {
+				rockchip,pins = <0 RK_PB1 2 &pcfg_pull_default>;
+			};
+
+			spi2_cs0: spi2-cs0 {
+				rockchip,pins = <0 RK_PB6 2 &pcfg_pull_default>;
+			};
+
+			spi2_tx: spi2-tx {
+				rockchip,pins = <0 RK_PB3 2 &pcfg_pull_default>;
+			};
+
+			spi2_rx: spi2-rx {
+				rockchip,pins = <0 RK_PB5 2 &pcfg_pull_default>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins = <2 RK_PD2 2 &pcfg_pull_default>,
+						<2 RK_PD3 2 &pcfg_pull_none>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins = <2 RK_PD5 2 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins = <0 RK_PC1 2 &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins = <1 RK_PB1 2 &pcfg_pull_default>,
+						<1 RK_PB2 2 &pcfg_pull_default>;
+			};
+
+			uart1_cts: uart1-cts {
+				rockchip,pins = <1 RK_PB0 2 &pcfg_pull_none>;
+			};
+
+			uart1_rts: uart1-rts {
+				rockchip,pins = <1 RK_PB3 2 &pcfg_pull_none>;
+			};
+		};
+
+		uart2 {
+			uart2_xfer: uart2-xfer {
+				rockchip,pins = <1 RK_PC2 2 &pcfg_pull_default>,
+						<1 RK_PC3 2 &pcfg_pull_none>;
+			};
+
+			uart2_cts: uart2-cts {
+				rockchip,pins = <0 RK_PD1 1 &pcfg_pull_none>;
+			};
+
+			uart2_rts: uart2-rts {
+				rockchip,pins = <0 RK_PD0 1 &pcfg_pull_none>;
+			};
+		};
+	};
+};
--
2.20.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ