[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <90b7e0e0-a354-f64d-8c53-aa80df684a3a@somainline.org>
Date: Sat, 29 Oct 2022 16:29:05 +0200
From: Konrad Dybcio <konrad.dybcio@...ainline.org>
To: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
andersson@...nel.org
Cc: robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
johan+linaro@...nel.org, quic_jprakash@...cinc.com,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, steev@...i.org
Subject: Re: [PATCH v2 12/12] arm64: dts: qcom: sc8280xp-x13s: Add thermal
zone support
On 29.10.2022 07:14, Manivannan Sadhasivam wrote:
> Add thermal zone support by making use of the thermistor SYS_THERM6.
> Based on experiments, this thermistor seems to reflect the actual
> surface temperature of the laptop.
>
> For the cooling device, all BIG CPU cores are throttle down to keep the
s/throttle/throttled
Is it okay to let the 4xA78C run at full throttle in thermal emergencies though?
> temperature at a sane level.
>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
> ---
> .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 46 +++++++++++++++++++
> 1 file changed, 46 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> index ca77c19c6d0d..96e2fa72f782 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> @@ -29,6 +29,52 @@ backlight {
> pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
> };
>
> + thermal-zones {
> + skin-temp-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <0>;
> + thermal-sensors = <&pmk8280_adc_tm 5>;
> +
> + trips {
> + skin_temp_alert0: trip-point0 {
> + temperature = <55000>;
> + hysteresis = <1000>;
> + type = "passive";
> + };
> +
> + skin_temp_alert1: trip-point1 {
> + temperature = <58000>;
> + hysteresis = <1000>;
> + type = "passive";
> + };
> +
> + skin-temp-crit {
> + temperature = <73000>;
Ouch, I didn't know we were serving burnt fingers at the cafeteria today :D
Or maybe this just looks scary.. The laptop looks plastic, so maybe it won't cause instant
burns?
Konrad
> + hysteresis = <1000>;
> + type = "critical";
> + };
> + };
> +
> + cooling-maps {
> + map0 {
> + trip = <&skin_temp_alert0>;
> + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> +
> + map1 {
> + trip = <&skin_temp_alert1>;
> + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> + };
> + };
> +
> vreg_edp_bl: regulator-edp-bl {
> compatible = "regulator-fixed";
>
Powered by blists - more mailing lists