Message-ID: <Y2FfKCKZ3N8rOqcT@kroah.com>
Date:   Tue, 1 Nov 2022 19:02:16 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     Elliot Berman <quic_eberman@...cinc.com>
Cc:     Bjorn Andersson <quic_bjorande@...cinc.com>,
        Murali Nalajala <quic_mnalajal@...cinc.com>,
        Trilok Soni <quic_tsoni@...cinc.com>,
        Srivatsa Vaddagiri <quic_svaddagi@...cinc.com>,
        Carl van Schaik <quic_cvanscha@...cinc.com>,
        Prakruthi Deepak Heragu <quic_pheragu@...cinc.com>,
        Andy Gross <agross@...nel.org>,
        Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
        Jassi Brar <jassisinghbrar@...il.com>,
        linux-arm-kernel@...ts.infradead.org,
        Mark Rutland <mark.rutland@....com>,
        Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
        Sudeep Holla <sudeep.holla@....com>,
        Marc Zyngier <maz@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Jonathan Corbet <corbet@....net>,
        Will Deacon <will@...nel.org>,
        Catalin Marinas <catalin.marinas@....com>,
        Arnd Bergmann <arnd@...db.de>,
        Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
        Amol Maheshwari <amahesh@....qualcomm.com>,
        Kalle Valo <kvalo@...nel.org>, devicetree@...r.kernel.org,
        linux-doc@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH v6 10/21] gunyah: rsc_mgr: Add resource manager RPC core

On Wed, Oct 26, 2022 at 11:58:35AM -0700, Elliot Berman wrote:
> The resource manager is a special virtual machine which is always
> running on a Gunyah system. It provides APIs for creating and destroying
> VMs, secure memory management, sharing/lending of memory between VMs,
> and setup of inter-VM communication. Calls to the resource manager are
> made via message queues.
> 
> This patch implements the basic probing and RPC mechanism to make those
> API calls. Request/response calls can be made with gh_rm_call.
> Drivers can also register to notifications pushed by RM via
> gh_rm_register_notifier
> 
> Specific API calls that resource manager supports will be implemented in
> subsequent patches.
> 
> Signed-off-by: Elliot Berman <quic_eberman@...cinc.com>
> ---
>  MAINTAINERS                    |   2 +-
>  drivers/virt/gunyah/Kconfig    |  15 +
>  drivers/virt/gunyah/Makefile   |   3 +
>  drivers/virt/gunyah/rsc_mgr.c  | 602 +++++++++++++++++++++++++++++++++
>  drivers/virt/gunyah/rsc_mgr.h  |  34 ++
>  include/linux/gunyah_rsc_mgr.h |  26 ++
>  6 files changed, 681 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/virt/gunyah/rsc_mgr.c
>  create mode 100644 drivers/virt/gunyah/rsc_mgr.h
>  create mode 100644 include/linux/gunyah_rsc_mgr.h
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 586539eadd3b..e072a0d2e553 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -8945,7 +8945,7 @@ F:	Documentation/virt/gunyah/
>  F:	arch/arm64/gunyah/
>  F:	drivers/mailbox/gunyah-msgq.c
>  F:	drivers/virt/gunyah/
> -F:	include/linux/gunyah.h
> +F:	include/linux/gunyah*.h
>  
>  HABANALABS PCI DRIVER
>  M:	Oded Gabbay <ogabbay@...nel.org>
> diff --git a/drivers/virt/gunyah/Kconfig b/drivers/virt/gunyah/Kconfig
> index 127156a678a6..4de88d80aa7b 100644
> --- a/drivers/virt/gunyah/Kconfig
> +++ b/drivers/virt/gunyah/Kconfig
> @@ -10,3 +10,18 @@ config GUNYAH
>  
>  	  Say Y/M here to enable the drivers needed to interact in a Gunyah
>  	  virtual environment.
> +
> +config GUNYAH_RESORUCE_MANAGER
> +	tristate "Gunyah Resource Manager"
> +	select MAILBOX
> +	select GUNYAH_MESSAGE_QUEUES
> +	depends on GUNYAH
> +	default y

You only have "default y" if your machine can not boot without it.
Please do not add that here.

> +	help
> +	  The resource manager (RM) is a privileged application VM supporting
> +	  the Gunyah Hypervisor. Enable this driver to support communicating
> +	  with Gunyah RM. This is typically required for a VM running under
> +	  Gunyah wanting to have Gunyah-awareness.
> +
> +	  Say Y/M here if unsure.
> +
> diff --git a/drivers/virt/gunyah/Makefile b/drivers/virt/gunyah/Makefile
> index 2ac4ee64b89d..2c18b0a56413 100644
> --- a/drivers/virt/gunyah/Makefile
> +++ b/drivers/virt/gunyah/Makefile
> @@ -1 +1,4 @@
>  obj-$(CONFIG_GUNYAH) += gunyah.o
> +
> +gunyah_rsc_mgr-y += rsc_mgr.o
> +obj-$(CONFIG_GUNYAH_RESORUCE_MANAGER) += gunyah_rsc_mgr.o
> diff --git a/drivers/virt/gunyah/rsc_mgr.c b/drivers/virt/gunyah/rsc_mgr.c
> new file mode 100644
> index 000000000000..a9fde703cbbe
> --- /dev/null
> +++ b/drivers/virt/gunyah/rsc_mgr.c
> @@ -0,0 +1,602 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#define pr_fmt(fmt) "gh_rsc_mgr: " fmt

This is a driver, you should never need this as you should be using the
dev_*() calls, not pr_*() calls as you always have access to a struct
device, right?

So you can drop this.


> +
> +#include <linux/of.h>
> +#include <linux/slab.h>
> +#include <linux/mutex.h>
> +#include <linux/sched.h>
> +#include <linux/gunyah.h>
> +#include <linux/module.h>
> +#include <linux/of_irq.h>
> +#include <linux/kthread.h>
> +#include <linux/notifier.h>
> +#include <linux/workqueue.h>
> +#include <linux/completion.h>
> +#include <linux/gunyah_rsc_mgr.h>
> +#include <linux/platform_device.h>
> +
> +#include "rsc_mgr.h"
> +
> +/* Resource Manager Header */
> +struct gh_rm_rpc_hdr {
> +	u8 version : 4, hdr_words : 4;
> +	u8 type : 2, fragments : 6;

Ick, that's hard to read.  One variable per line please?

And why the bit packed stuff?  Are you sure this is the way to do this?
Why not use a bitmask instead?

> +	u16 seq;
> +	u32 msg_id;
> +} __packed;
> +
> +/* Standard reply header */
> +struct gh_rm_rpc_reply_hdr {
> +	struct gh_rm_rpc_hdr rpc_hdr;
> +	u32 err_code;
> +} __packed;
> +
> +/* RPC Header versions */
> +#define GH_RM_RPC_HDR_VERSION_ONE	0x1
> +
> +/* RPC Header words */
> +#define GH_RM_RPC_HDR_WORDS		0x2
> +
> +/* RPC Message types */
> +#define GH_RM_RPC_TYPE_CONT		0x0
> +#define GH_RM_RPC_TYPE_REQ		0x1
> +#define GH_RM_RPC_TYPE_RPLY		0x2
> +#define GH_RM_RPC_TYPE_NOTIF		0x3
> +
> +#define GH_RM_MAX_NUM_FRAGMENTS		62
> +
> +#define GH_RM_MAX_MSG_SIZE	(GH_MSGQ_MAX_MSG_SIZE - sizeof(struct gh_rm_rpc_hdr))
> +
> +/**
> + * struct gh_rm_connection - Represents a complete message from resource manager
> + * @payload: Combined payload of all the fragments (msg headers stripped off).
> + * @size: Size of the payload.
> + * @ret: Linux return code, set in case there was an error processing connection
> + * @msg_id: Message ID from the header.
> + * @type: GH_RM_RPC_TYPE_RPLY or GH_RM_RPC_TYPE_NOTIF.
> + * @num_fragments: total number of fragments expected to be received.
> + * @fragments_received: fragments received so far.
> + * @rm_error: For request/reply sequences with standard replies.
> + * @seq: Sequence ID for the main message.
> + * @seq_done: Signals caller that the RM reply has been received
> + */
> +struct gh_rm_connection {
> +	void *payload;
> +	size_t size;
> +	int ret;
> +	u32 msg_id;
> +	u8 type;
> +
> +	u8 num_fragments;
> +	u8 fragments_received;
> +
> +	/* only for req/reply sequence */
> +	u32 rm_error;
> +	u16 seq;
> +	struct completion seq_done;
> +};
> +
> +struct gh_rm_notif_complete {
> +	struct gh_rm_connection *conn;
> +	struct work_struct work;
> +};
> +
> +struct gh_rsc_mgr {
> +	struct gunyah_resource tx_ghrsc, rx_ghrsc;
> +	struct gh_msgq msgq;
> +	struct mbox_client msgq_client;
> +	struct gh_rm_connection *active_rx_connection;
> +	int last_tx_ret;
> +
> +	struct idr call_idr;
> +	struct mutex call_idr_lock;
> +
> +	struct mutex send_lock;
> +
> +	struct work_struct recv_work;
> +};
> +
> +static struct gh_rsc_mgr *__rsc_mgr;

Sorry, no, you don't get to just limit yourself to one of these.  Please
make this properly handle any number of "resource managers", static
variables like this is not ok.

> +SRCU_NOTIFIER_HEAD_STATIC(gh_rm_notifier);

Why do you need a notifier list?

Who will register for this?  For what?  Why?

> +static int gh_rm_drv_probe(struct platform_device *pdev)
> +{
> +	struct gh_rsc_mgr *rsc_mgr;
> +	int ret;
> +
> +	rsc_mgr = devm_kzalloc(&pdev->dev, sizeof(*rsc_mgr), GFP_KERNEL);
> +	if (!rsc_mgr)
> +		return -ENOMEM;
> +	platform_set_drvdata(pdev, rsc_mgr);
> +
> +	mutex_init(&rsc_mgr->call_idr_lock);
> +	idr_init(&rsc_mgr->call_idr);
> +	mutex_init(&rsc_mgr->send_lock);
> +
> +	ret = gh_msgq_platform_probe_direction(pdev, GUNYAH_RESOURCE_TYPE_MSGQ_TX, 0,
> +						&rsc_mgr->tx_ghrsc);
> +	if (ret)
> +		return ret;
> +
> +	ret = gh_msgq_platform_probe_direction(pdev, GUNYAH_RESOURCE_TYPE_MSGQ_RX, 1,
> +						&rsc_mgr->rx_ghrsc);
> +	if (ret)
> +		return ret;
> +
> +	rsc_mgr->msgq_client.dev = &pdev->dev;

So your client device is the platform device, and not a new bridge
device that you create instead?  Why?


> +	rsc_mgr->msgq_client.tx_block = true;
> +	rsc_mgr->msgq_client.rx_callback = gh_rm_msgq_rx_data;
> +	rsc_mgr->msgq_client.tx_done = gh_rm_msgq_tx_done;
> +
> +	ret = gh_msgq_init(&pdev->dev, &rsc_mgr->msgq, &rsc_mgr->msgq_client,
> +				&rsc_mgr->tx_ghrsc, &rsc_mgr->rx_ghrsc);
> +	if (ret)
> +		return ret;
> +
> +	__rsc_mgr = rsc_mgr;
> +
> +	return 0;
> +}
> +static struct platform_driver gh_rm_driver = {
> +	.probe = gh_rm_drv_probe,
> +	.remove = gh_rm_drv_remove,
> +	.driver = {
> +		.name = "gh_rsc_mgr",
> +		.of_match_table = gh_rm_of_match,
> +	},

Wait, why is this a platform driver?  This is binding to a real device
on a real bus, not a random platform description in DT, right?

Or is it controlled by your DT?  I can't figure that out here, sorry.

thanks,

greg k-h

Powered by blists - more mailing lists