linux-kernel - Re: [PATCH] powerpc: dts: turris1x.dts: Add channel labels for temperature sensor

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20221101224348.xkpzucskunn46i5z@pali>
Date:   Tue, 1 Nov 2022 23:43:48 +0100
From:   Pali Rohár <pali@...nel.org>
To:     Michael Ellerman <mpe@...erman.id.au>,
        Nicholas Piggin <npiggin@...il.com>,
        Christophe Leroy <christophe.leroy@...roup.eu>
Cc:     linuxppc-dev@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
        linux-hwmon@...r.kernel.org,
        Marek Behún <kabel@...nel.org>,
        Josef Schlehofer <josef.schlehofer@....cz>
Subject: Re: [PATCH] powerpc: dts: turris1x.dts: Add channel labels for
 temperature sensor

Michael, could you take this patch?

On Sunday 09 October 2022 14:05:06 Pali Rohár wrote:
> On Friday 30 September 2022 14:46:18 Pali Rohár wrote:
> > + CC hwmon ML
> > 
> > On Friday 30 September 2022 14:39:01 Pali Rohár wrote:
> > > Channel 0 of SA56004ED chip refers to internal SA56004ED chip sensor (chip
> > > itself is located on the board) and channel 1 of SA56004ED chip refers to
> > > external sensor which is connected to temperature diode of the P2020 CPU.
> > > 
> > > Fixes: 54c15ec3b738 ("powerpc: dts: Add DTS file for CZ.NIC Turris 1.x routers")
> > > Signed-off-by: Pali Rohár <pali@...nel.org>
> > > ---
> > > With this change userspace 'sensors' applications prints labels:
> > > 
> > >     $ sensors
> > >     sa56004-i2c-0-4c
> > >     Adapter: MPC adapter (i2c@...0)
> > >     board:        +34.2°C  (low  =  +0.0°C, high = +70.0°C)
> > >                            (crit = +85.0°C, hyst = +75.0°C)
> > >     cpu:          +58.9°C  (low  =  +0.0°C, high = +70.0°C)
> > >                            (crit = +85.0°C, hyst = +75.0°C)
> > > 
> > > And without this change it prints just generic tempX names:
> > > 
> > >     $ sensors
> > >     sa56004-i2c-0-4c
> > >     Adapter: MPC adapter (i2c@...0)
> > >     temp1:        +43.0°C  (low  =  +0.0°C, high = +70.0°C)
> > >                            (crit = +85.0°C, hyst = +75.0°C)
> > >     temp2:        +63.4°C  (low  =  +0.0°C, high = +70.0°C)
> > >                            (crit = +85.0°C, hyst = +75.0°C)
> > > ---
> > >  arch/powerpc/boot/dts/turris1x.dts | 14 ++++++++++++++
> > >  1 file changed, 14 insertions(+)
> > > 
> > > diff --git a/arch/powerpc/boot/dts/turris1x.dts b/arch/powerpc/boot/dts/turris1x.dts
> > > index 4033c554b06a..5b5278c32e43 100644
> > > --- a/arch/powerpc/boot/dts/turris1x.dts
> > > +++ b/arch/powerpc/boot/dts/turris1x.dts
> > > @@ -69,6 +69,20 @@
> > >  				interrupt-parent = <&gpio>;
> > >  				interrupts = <12 IRQ_TYPE_LEVEL_LOW>, /* GPIO12 - ALERT pin */
> > >  					     <13 IRQ_TYPE_LEVEL_LOW>; /* GPIO13 - CRIT pin */
> > > +				#address-cells = <1>;
> > > +				#size-cells = <0>;
> > > +
> > > +				/* Local temperature sensor (SA56004ED internal) */
> > > +				channel@0 {
> > > +					reg = <0>;
> > > +					label = "board";
> > > +				};
> > > +
> > > +				/* Remote temperature sensor (D+/D- connected to P2020 CPU Temperature Diode) */
> > > +				channel@1 {
> > > +					reg = <1>;
> > > +					label = "cpu";
> > > +				};
> > 
> > I'm not sure if you want UPPERCASE, lowercase, PascalCase, kebab-case
> > or snake_case format of labels. Or if you want also "temp" or
> > "temperature" keyword in the label. So please adjust label to the
> > preferred one, if proposed format is not the correct.
> 
> Ok, if nobody complains then please take this patch as is.
> 
> > >  			};
> > >  
> > >  			/* DDR3 SPD/EEPROM */
> > > -- 
> > > 2.20.1
> > >