| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221101145426.251680-24-vkuznets@redhat.com>
Date: Tue, 1 Nov 2022 15:54:01 +0100
From: Vitaly Kuznetsov <vkuznets@...hat.com>
To: kvm@...r.kernel.org, Paolo Bonzini <pbonzini@...hat.com>,
Sean Christopherson <seanjc@...gle.com>
Cc: Wanpeng Li <wanpengli@...cent.com>,
Jim Mattson <jmattson@...gle.com>,
Michael Kelley <mikelley@...rosoft.com>,
Siddharth Chandrasekaran <sidcha@...zon.de>,
Yuan Yao <yuan.yao@...ux.intel.com>,
Maxim Levitsky <mlevitsk@...hat.com>,
linux-hyperv@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v13 23/48] KVM: x86: hyper-v: L2 TLB flush
Handle L2 TLB flush requests by going through all vCPUs and checking
whether there are vCPUs running the same VM_ID with a VP_ID specified
in the requests. Perform synthetic exit to L2 upon finish.
Note, while checking VM_ID/VP_ID of running vCPUs seem to be a bit
racy, we count on the fact that KVM flushes the whole L2 VPID upon
transition. Also, KVM_REQ_HV_TLB_FLUSH request needs to be done upon
transition between L1 and L2 to make sure all pending requests are
always processed.
For the reference, Hyper-V TLFS refers to the feature as "Direct
Virtual Flush".
Note, nVMX/nSVM code does not handle VMCALL/VMMCALL from L2 yet.
Reviewed-by: Sean Christopherson <seanjc@...gle.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@...hat.com>
---
arch/x86/kvm/hyperv.c | 80 ++++++++++++++++++++++++++++++++++++-------
arch/x86/kvm/hyperv.h | 3 --
arch/x86/kvm/trace.h | 21 +++++++-----
3 files changed, 80 insertions(+), 24 deletions(-)
diff --git a/arch/x86/kvm/hyperv.c b/arch/x86/kvm/hyperv.c
index 058e14564389..3715a6f026a2 100644
--- a/arch/x86/kvm/hyperv.c
+++ b/arch/x86/kvm/hyperv.c
@@ -34,6 +34,7 @@
#include <linux/eventfd.h>
#include <asm/apicdef.h>
+#include <asm/mshyperv.h>
#include <trace/events/kvm.h>
#include "trace.h"
@@ -1832,18 +1833,16 @@ static int kvm_hv_get_tlb_flush_entries(struct kvm *kvm, struct kvm_hv_hcall *hc
entries, consumed_xmm_halves, offset);
}
-static void hv_tlb_flush_enqueue(struct kvm_vcpu *vcpu, u64 *entries, int count)
+static void hv_tlb_flush_enqueue(struct kvm_vcpu *vcpu,
+ struct kvm_vcpu_hv_tlb_flush_fifo *tlb_flush_fifo,
+ u64 *entries, int count)
{
- struct kvm_vcpu_hv_tlb_flush_fifo *tlb_flush_fifo;
struct kvm_vcpu_hv *hv_vcpu = to_hv_vcpu(vcpu);
u64 flush_all_entry = KVM_HV_TLB_FLUSHALL_ENTRY;
if (!hv_vcpu)
return;
- /* kvm_hv_flush_tlb() is not ready to handle requests for L2s yet */
- tlb_flush_fifo = &hv_vcpu->tlb_flush_fifo[HV_L1_TLB_FLUSH_FIFO];
-
spin_lock(&tlb_flush_fifo->write_lock);
/*
@@ -1912,6 +1911,7 @@ static u64 kvm_hv_flush_tlb(struct kvm_vcpu *vcpu, struct kvm_hv_hcall *hc)
struct hv_tlb_flush_ex flush_ex;
struct hv_tlb_flush flush;
DECLARE_BITMAP(vcpu_mask, KVM_MAX_VCPUS);
+ struct kvm_vcpu_hv_tlb_flush_fifo *tlb_flush_fifo;
/*
* Normally, there can be no more than 'KVM_HV_TLB_FLUSH_FIFO_SIZE'
* entries on the TLB flush fifo. The last entry, however, needs to be
@@ -1962,7 +1962,8 @@ static u64 kvm_hv_flush_tlb(struct kvm_vcpu *vcpu, struct kvm_hv_hcall *hc)
}
trace_kvm_hv_flush_tlb(flush.processor_mask,
- flush.address_space, flush.flags);
+ flush.address_space, flush.flags,
+ is_guest_mode(vcpu));
valid_bank_mask = BIT_ULL(0);
sparse_banks[0] = flush.processor_mask;
@@ -1993,7 +1994,7 @@ static u64 kvm_hv_flush_tlb(struct kvm_vcpu *vcpu, struct kvm_hv_hcall *hc)
trace_kvm_hv_flush_tlb_ex(flush_ex.hv_vp_set.valid_bank_mask,
flush_ex.hv_vp_set.format,
flush_ex.address_space,
- flush_ex.flags);
+ flush_ex.flags, is_guest_mode(vcpu));
valid_bank_mask = flush_ex.hv_vp_set.valid_bank_mask;
all_cpus = flush_ex.hv_vp_set.format !=
@@ -2037,19 +2038,57 @@ static u64 kvm_hv_flush_tlb(struct kvm_vcpu *vcpu, struct kvm_hv_hcall *hc)
* vcpu->arch.cr3 may not be up-to-date for running vCPUs so we can't
* analyze it here, flush TLB regardless of the specified address space.
*/
- if (all_cpus) {
- kvm_for_each_vcpu(i, v, kvm)
- hv_tlb_flush_enqueue(v, tlb_flush_entries, hc->rep_cnt);
+ if (all_cpus && !is_guest_mode(vcpu)) {
+ kvm_for_each_vcpu(i, v, kvm) {
+ tlb_flush_fifo = kvm_hv_get_tlb_flush_fifo(v, false);
+ hv_tlb_flush_enqueue(v, tlb_flush_fifo,
+ tlb_flush_entries, hc->rep_cnt);
+ }
kvm_make_all_cpus_request(kvm, KVM_REQ_HV_TLB_FLUSH);
- } else {
+ } else if (!is_guest_mode(vcpu)) {
sparse_set_to_vcpu_mask(kvm, sparse_banks, valid_bank_mask, vcpu_mask);
for_each_set_bit(i, vcpu_mask, KVM_MAX_VCPUS) {
v = kvm_get_vcpu(kvm, i);
if (!v)
continue;
- hv_tlb_flush_enqueue(v, tlb_flush_entries, hc->rep_cnt);
+ tlb_flush_fifo = kvm_hv_get_tlb_flush_fifo(v, false);
+ hv_tlb_flush_enqueue(v, tlb_flush_fifo,
+ tlb_flush_entries, hc->rep_cnt);
+ }
+
+ kvm_make_vcpus_request_mask(kvm, KVM_REQ_HV_TLB_FLUSH, vcpu_mask);
+ } else {
+ struct kvm_vcpu_hv *hv_v;
+
+ bitmap_zero(vcpu_mask, KVM_MAX_VCPUS);
+
+ kvm_for_each_vcpu(i, v, kvm) {
+ hv_v = to_hv_vcpu(v);
+
+ /*
+ * The following check races with nested vCPUs entering/exiting
+ * and/or migrating between L1's vCPUs, however the only case when
+ * KVM *must* flush the TLB is when the target L2 vCPU keeps
+ * running on the same L1 vCPU from the moment of the request until
+ * kvm_hv_flush_tlb() returns. TLB is fully flushed in all other
+ * cases, e.g. when the target L2 vCPU migrates to a different L1
+ * vCPU or when the corresponding L1 vCPU temporary switches to a
+ * different L2 vCPU while the request is being processed.
+ */
+ if (!hv_v || hv_v->nested.vm_id != hv_vcpu->nested.vm_id)
+ continue;
+
+ if (!all_cpus &&
+ !hv_is_vp_in_sparse_set(hv_v->nested.vp_id, valid_bank_mask,
+ sparse_banks))
+ continue;
+
+ __set_bit(i, vcpu_mask);
+ tlb_flush_fifo = kvm_hv_get_tlb_flush_fifo(v, true);
+ hv_tlb_flush_enqueue(v, tlb_flush_fifo,
+ tlb_flush_entries, hc->rep_cnt);
}
kvm_make_vcpus_request_mask(kvm, KVM_REQ_HV_TLB_FLUSH, vcpu_mask);
@@ -2239,10 +2278,25 @@ static void kvm_hv_hypercall_set_result(struct kvm_vcpu *vcpu, u64 result)
static int kvm_hv_hypercall_complete(struct kvm_vcpu *vcpu, u64 result)
{
+ u32 tlb_lock_count = 0;
+ int ret;
+
+ if (hv_result_success(result) && is_guest_mode(vcpu) &&
+ kvm_hv_is_tlb_flush_hcall(vcpu) &&
+ kvm_read_guest(vcpu->kvm, to_hv_vcpu(vcpu)->nested.pa_page_gpa,
+ &tlb_lock_count, sizeof(tlb_lock_count)))
+ result = HV_STATUS_INVALID_HYPERCALL_INPUT;
+
trace_kvm_hv_hypercall_done(result);
kvm_hv_hypercall_set_result(vcpu, result);
++vcpu->stat.hypercalls;
- return kvm_skip_emulated_instruction(vcpu);
+
+ ret = kvm_skip_emulated_instruction(vcpu);
+
+ if (tlb_lock_count)
+ kvm_x86_ops.nested_ops->hv_inject_synthetic_vmexit_post_tlb_flush(vcpu);
+
+ return ret;
}
static int kvm_hv_hypercall_complete_userspace(struct kvm_vcpu *vcpu)
diff --git a/arch/x86/kvm/hyperv.h b/arch/x86/kvm/hyperv.h
index 5f9c76b45f46..7706e203ff43 100644
--- a/arch/x86/kvm/hyperv.h
+++ b/arch/x86/kvm/hyperv.h
@@ -159,9 +159,6 @@ static inline struct kvm_vcpu_hv_tlb_flush_fifo *kvm_hv_get_tlb_flush_fifo(struc
int i = is_guest_mode ? HV_L2_TLB_FLUSH_FIFO :
HV_L1_TLB_FLUSH_FIFO;
- /* KVM does not handle L2 TLB flush requests yet */
- WARN_ON_ONCE(i != HV_L1_TLB_FLUSH_FIFO);
-
return &hv_vcpu->tlb_flush_fifo[i];
}
diff --git a/arch/x86/kvm/trace.h b/arch/x86/kvm/trace.h
index bc25589ad588..09f3392dd830 100644
--- a/arch/x86/kvm/trace.h
+++ b/arch/x86/kvm/trace.h
@@ -1547,38 +1547,41 @@ TRACE_EVENT(kvm_hv_timer_state,
* Tracepoint for kvm_hv_flush_tlb.
*/
TRACE_EVENT(kvm_hv_flush_tlb,
- TP_PROTO(u64 processor_mask, u64 address_space, u64 flags),
- TP_ARGS(processor_mask, address_space, flags),
+ TP_PROTO(u64 processor_mask, u64 address_space, u64 flags, bool guest_mode),
+ TP_ARGS(processor_mask, address_space, flags, guest_mode),
TP_STRUCT__entry(
__field(u64, processor_mask)
__field(u64, address_space)
__field(u64, flags)
+ __field(bool, guest_mode)
),
TP_fast_assign(
__entry->processor_mask = processor_mask;
__entry->address_space = address_space;
__entry->flags = flags;
+ __entry->guest_mode = guest_mode;
),
- TP_printk("processor_mask 0x%llx address_space 0x%llx flags 0x%llx",
+ TP_printk("processor_mask 0x%llx address_space 0x%llx flags 0x%llx %s",
__entry->processor_mask, __entry->address_space,
- __entry->flags)
+ __entry->flags, __entry->guest_mode ? "(L2)" : "")
);
/*
* Tracepoint for kvm_hv_flush_tlb_ex.
*/
TRACE_EVENT(kvm_hv_flush_tlb_ex,
- TP_PROTO(u64 valid_bank_mask, u64 format, u64 address_space, u64 flags),
- TP_ARGS(valid_bank_mask, format, address_space, flags),
+ TP_PROTO(u64 valid_bank_mask, u64 format, u64 address_space, u64 flags, bool guest_mode),
+ TP_ARGS(valid_bank_mask, format, address_space, flags, guest_mode),
TP_STRUCT__entry(
__field(u64, valid_bank_mask)
__field(u64, format)
__field(u64, address_space)
__field(u64, flags)
+ __field(bool, guest_mode)
),
TP_fast_assign(
@@ -1586,12 +1589,14 @@ TRACE_EVENT(kvm_hv_flush_tlb_ex,
__entry->format = format;
__entry->address_space = address_space;
__entry->flags = flags;
+ __entry->guest_mode = guest_mode;
),
TP_printk("valid_bank_mask 0x%llx format 0x%llx "
- "address_space 0x%llx flags 0x%llx",
+ "address_space 0x%llx flags 0x%llx %s",
__entry->valid_bank_mask, __entry->format,
- __entry->address_space, __entry->flags)
+ __entry->address_space, __entry->flags,
+ __entry->guest_mode ? "(L2)" : "")
);
/*
--
2.37.3
Powered by blists - more mailing lists