[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CADnq5_PmwiOecVqfpy17V4viYA5wt8WbEDOFPo70VSdmGTjOew@mail.gmail.com>
Date: Tue, 1 Nov 2022 12:06:55 -0400
From: Alex Deucher <alexdeucher@...il.com>
To: Filip Moc <dev@...6.cz>
Cc: Harry Wentland <harry.wentland@....com>,
Leo Li <sunpeng.li@....com>,
Rodrigo Siqueira <Rodrigo.Siqueira@....com>,
David Airlie <airlied@...ux.ie>,
"Pan, Xinhui" <Xinhui.Pan@....com>, linux-kernel@...r.kernel.org,
amd-gfx@...ts.freedesktop.org, dri-devel@...ts.freedesktop.org,
Alex Deucher <alexander.deucher@....com>,
Christian König <christian.koenig@....com>
Subject: Re: [PATCH] drm/amd/display: add parameter backlight_min
On Tue, Nov 1, 2022 at 11:42 AM Filip Moc <dev@...6.cz> wrote:
>
> Hello Alex,
>
> thank you for your response.
>
> Yes, I have HP ENVY x360 Convertible 13-ay1xxx, and backlight_min=2
> seems to work the best in my case.
>
> I added a dmi based quirk table. So far with support only for display 0
> to make it simple. Support for more displays in quirk table can be added
> later if ever needed.
>
> According to [1] HP ENVY x360 Convertible 13-ag0xxx also needs a quirk
> so I'm going to use this to cover both:
> DMI_EXACT_MATCH(DMI_SYS_VENDOR, "HP")
> DMI_MATCH(DMI_PRODUCT_NAME, "HP ENVY x360 Convertible 13-")
You might want to add an additional check for the panel name/vendor
from the EDID as well in case HP uses multiple panels from different
vendors on that system.
Alex
>
> So far it seems to be working fine.
> I'll send this in v2 once I do some final tweaks and do more tests.
>
> [1] https://bugzilla.kernel.org/show_bug.cgi?id=203439#c5
>
> Filip
>
>
> V Mon, Oct 31, 2022 at 11:36:09AM -0400, Alex Deucher napsal(a):
> > On Sun, Oct 30, 2022 at 5:26 AM Filip Moc <dev@...6.cz> wrote:
> > >
> > > There are some devices on which amdgpu won't allow user to set brightness
> > > to sufficiently low values even though the hardware would support it just
> > > fine.
> > >
> > > This usually happens in two cases when either configuration of brightness
> > > levels via ACPI/ATIF is not available and amdgpu falls back to defaults
> > > (currently 12 for minimum level) which may be too high for some devices or
> > > even the configuration via ATIF is available but the minimum brightness
> > > level provided by the manufacturer is set to unreasonably high value.
> > >
> > > In either case user can use this new module parameter to adjust the
> > > minimum allowed backlight brightness level.
> > >
> > > Link: https://bugzilla.kernel.org/show_bug.cgi?id=203439
> > > Signed-off-by: Filip Moc <dev@...6.cz>
> >
> > Does your system require an override and if so, what is it? It would
> > be good to add a quirk for your system as well so that other users of
> > the same system wouldn't need to manually figure out an apply the
> > settings.
> >
> > Alex
> >
> >
> > > ---
> > > drivers/gpu/drm/amd/amdgpu/amdgpu.h | 3 +++
> > > drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 15 +++++++++++++++
> > > drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 15 +++++++++++++++
> > > 3 files changed, 33 insertions(+)
> > >
> > > diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
> > > index 0e6ddf05c23c..c5445402c49d 100644
> > > --- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h
> > > +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
> > > @@ -200,6 +200,9 @@ extern uint amdgpu_dc_debug_mask;
> > > extern uint amdgpu_dc_visual_confirm;
> > > extern uint amdgpu_dm_abm_level;
> > > extern int amdgpu_backlight;
> > > +#ifdef CONFIG_DRM_AMD_DC
> > > +extern int amdgpu_backlight_override_min[];
> > > +#endif
> > > extern struct amdgpu_mgpu_info mgpu_info;
> > > extern int amdgpu_ras_enable;
> > > extern uint amdgpu_ras_mask;
> > > diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> > > index 16f6a313335e..f2fb549ac52f 100644
> > > --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> > > +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> > > @@ -43,6 +43,7 @@
> > > #include "amdgpu_irq.h"
> > > #include "amdgpu_dma_buf.h"
> > > #include "amdgpu_sched.h"
> > > +#include "amdgpu_dm.h"
> > > #include "amdgpu_fdinfo.h"
> > > #include "amdgpu_amdkfd.h"
> > >
> > > @@ -853,6 +854,20 @@ int amdgpu_backlight = -1;
> > > MODULE_PARM_DESC(backlight, "Backlight control (0 = pwm, 1 = aux, -1 auto (default))");
> > > module_param_named(backlight, amdgpu_backlight, bint, 0444);
> > >
> > > +/**
> > > + * DOC: backlight_min (array of int)
> > > + * Override minimum allowed backlight brightness signal (per display).
> > > + * Must be less than the maximum brightness signal.
> > > + * Negative value means no override.
> > > + *
> > > + * Defaults to all -1 (no override on any display).
> > > + */
> > > +#ifdef CONFIG_DRM_AMD_DC
> > > +int amdgpu_backlight_override_min[AMDGPU_DM_MAX_NUM_EDP] = {[0 ... (AMDGPU_DM_MAX_NUM_EDP-1)] = -1};
> > > +MODULE_PARM_DESC(backlight_min, "Override minimum backlight brightness signal (0..max-1, -1 = no override (default))");
> > > +module_param_array_named(backlight_min, amdgpu_backlight_override_min, int, NULL, 0444);
> > > +#endif
> > > +
> > > /**
> > > * DOC: tmz (int)
> > > * Trusted Memory Zone (TMZ) is a method to protect data being written
> > > diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> > > index eb4ce7216104..e2c36ba93d05 100644
> > > --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> > > +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> > > @@ -3911,6 +3911,21 @@ static void amdgpu_dm_update_backlight_caps(struct amdgpu_display_manager *dm,
> > > dm->backlight_caps[bl_idx].min_input_signal = AMDGPU_DM_DEFAULT_MIN_BACKLIGHT;
> > > dm->backlight_caps[bl_idx].max_input_signal = AMDGPU_DM_DEFAULT_MAX_BACKLIGHT;
> > > #endif
> > > +
> > > + if (amdgpu_backlight_override_min[bl_idx] >= 0) {
> > > + if (amdgpu_backlight_override_min[bl_idx] < dm->backlight_caps[bl_idx].max_input_signal) {
> > > + DRM_INFO("amdgpu: backlight[%i]: overriding minimum brightness from %i to %i\n",
> > > + bl_idx,
> > > + dm->backlight_caps[bl_idx].min_input_signal,
> > > + amdgpu_backlight_override_min[bl_idx]);
> > > + dm->backlight_caps[bl_idx].min_input_signal = amdgpu_backlight_override_min[bl_idx];
> > > + } else {
> > > + DRM_ERROR("amdgpu: backlight[%i]: minimum brightness override (%i) is not below maximum (%i)\n",
> > > + bl_idx,
> > > + amdgpu_backlight_override_min[bl_idx],
> > > + dm->backlight_caps[bl_idx].max_input_signal);
> > > + }
> > > + }
> > > }
> > >
> > > static int get_brightness_range(const struct amdgpu_dm_backlight_caps *caps,
> > >
> > > base-commit: d8c03bfe146fd5e081a252cd34f3f12ca0255357
> > > --
> > > 2.30.2
> > >
Powered by blists - more mailing lists