lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20221102231037.GA6902@bhelgaas>
Date:   Wed, 2 Nov 2022 18:10:37 -0500
From:   Bjorn Helgaas <helgaas@...nel.org>
To:     Richard Zhu <hongxing.zhu@....com>
Cc:     l.stach@...gutronix.de, bhelgaas@...gle.com,
        lorenzo.pieralisi@....com, linux-pci@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        kernel@...gutronix.de, linux-imx@....com
Subject: Re: [PATCH v1] PCI: imx6: Set MSI enable bit of RC in resume

On Tue, Nov 01, 2022 at 03:59:55PM +0800, Richard Zhu wrote:
> The MSI Enable bit controls delivery of MSI interrupts from components
> below the Root Port. This bit might lost during the suspend, should be
> re-configured during resume.

Just out of curiosity, why would this bit "get lost" during suspend?

Don't the normal save and restore in the suspend/resume paths take
care of this?  Are there other bits that might get lost?

> Encapsulate the MSI enable set into a standalone function, and invoke it
> in both probe and resume.
> 
> Signed-off-by: Richard Zhu <hongxing.zhu@....com>
> ---
>  drivers/pci/controller/dwc/pci-imx6.c | 24 +++++++++++++++++-------
>  1 file changed, 17 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 2616585ca5f8..dba15546075f 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -1041,6 +1041,21 @@ static void imx6_pcie_pm_turnoff(struct imx6_pcie *imx6_pcie)
>  	usleep_range(1000, 10000);
>  }
>  
> +static void pci_imx_set_msi_en(struct dw_pcie *pci)
> +{
> +	u8 offset;
> +	u16 val;
> +
> +	if (pci_msi_enabled()) {
> +		offset = dw_pcie_find_capability(pci, PCI_CAP_ID_MSI);
> +		dw_pcie_dbi_ro_wr_en(pci);
> +		val = dw_pcie_readw_dbi(pci, offset + PCI_MSI_FLAGS);
> +		val |= PCI_MSI_FLAGS_ENABLE;
> +		dw_pcie_writew_dbi(pci, offset + PCI_MSI_FLAGS, val);
> +		dw_pcie_dbi_ro_wr_dis(pci);
> +	}
> +}
> +
>  static int imx6_pcie_suspend_noirq(struct device *dev)
>  {
>  	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
> @@ -1073,6 +1088,7 @@ static int imx6_pcie_resume_noirq(struct device *dev)
>  	if (imx6_pcie->link_is_up)
>  		imx6_pcie_start_link(imx6_pcie->pci);
>  
> +	pci_imx_set_msi_en(imx6_pcie->pci);
>  	return 0;
>  }
>  
> @@ -1090,7 +1106,6 @@ static int imx6_pcie_probe(struct platform_device *pdev)
>  	struct resource *dbi_base;
>  	struct device_node *node = dev->of_node;
>  	int ret;
> -	u16 val;
>  
>  	imx6_pcie = devm_kzalloc(dev, sizeof(*imx6_pcie), GFP_KERNEL);
>  	if (!imx6_pcie)
> @@ -1282,12 +1297,7 @@ static int imx6_pcie_probe(struct platform_device *pdev)
>  	if (ret < 0)
>  		return ret;
>  
> -	if (pci_msi_enabled()) {
> -		u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_MSI);
> -		val = dw_pcie_readw_dbi(pci, offset + PCI_MSI_FLAGS);
> -		val |= PCI_MSI_FLAGS_ENABLE;
> -		dw_pcie_writew_dbi(pci, offset + PCI_MSI_FLAGS, val);
> -	}
> +	pci_imx_set_msi_en(pci);
>  
>  	return 0;
>  }
> -- 
> 2.25.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ