[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20221103174743.16827-1-r-ravikumar@ti.com>
Date: Thu, 3 Nov 2022 23:17:41 +0530
From: Rahul T R <r-ravikumar@...com>
To: <nm@...com>
CC: <vigneshr@...com>, <kristo@...nel.org>, <robh+dt@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>,
<linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<r-ravikumar@...com>, <jkridner@...il.com>
Subject: [PATCH v7 0/2] Enable RPi header on j721e sk
The following series of patches enables RPi header
on j721e sk. It is a 40 pin io expasion header which
brings out i2c5, ehrpwm 2,3 and some pins of gpio 0,1
v7:
- Rebased to next-20221103
- Move setting status diable to main dtsi
v6:
- Rebased to 6.1-rc1
v5:
- Enable only gpio's and i2c on the RPi Header
as per the discussion in the v4
v4:
- Correct the node name in dt binding example
v3:
- Change node name from clock to clock-controller
- Add correct description for clock-controller node
v2:
- Add full path for clock property $ref
- Remove the discription for clock pattern property,
since $ref is added
- Remove the label in the example
- Fix the indentation in the example
Rahul T R (1):
arm64: dts: ti: k3-j721e-sk: Add pinmux for RPi Header
Vijay Pothukuchi (1):
arm64: dts: ti: k3-j721e-main: Add dts nodes for EHRPWMs
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 68 ++++++++++++++++++++++-
arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 59 ++++++++++++++++++++
2 files changed, 126 insertions(+), 1 deletion(-)
--
2.38.0
Powered by blists - more mailing lists