lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <ef719b46-18af-f567-2665-f563c953fb34@linaro.org>
Date:   Thu, 3 Nov 2022 16:28:07 -0400
From:   Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To:     Naresh Solanki <naresh.solanki@...ements.com>,
        linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
        Lee Jones <lee@...nel.org>, Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Patrick Rudolph <patrick.rudolph@...ements.com>
Cc:     Marcello Sylvester Bauer <sylv@...v.io>
Subject: Re: [PATCH v7 1/2] dt-bindings: mfd: Add bindings for MAX5970 and
 MAX5978

On 03/11/2022 16:25, Naresh Solanki wrote:
> From: Marcello Sylvester Bauer <sylv@...v.io>
> 
> The MAX597x is a hot swap controller with configurable fault protection.
> It also has 10bit ADC for current & voltage measurements.
> 
> Signed-off-by: Patrick Rudolph <patrick.rudolph@...ements.com>
> Signed-off-by: Marcello Sylvester Bauer <sylv@...v.io>
> Signed-off-by: Naresh Solanki <Naresh.Solanki@...ements.com>
> ---
>  .../bindings/mfd/maxim,max5970.yaml           | 163 ++++++++++++++++++
>  1 file changed, 163 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/maxim,max5970.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mfd/maxim,max5970.yaml b/Documentation/devicetree/bindings/mfd/maxim,max5970.yaml
> new file mode 100644
> index 000000000000..bf3db2484723
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/maxim,max5970.yaml
> @@ -0,0 +1,163 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/maxim,max5970.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Regulator for MAX5970 smart switch from Maxim Integrated.
> +
> +maintainers:
> +  - Patrick Rudolph <patrick.rudolph@...ements.com>
> +
> +description: |
> +  The smart switch provides no output regulation, but independent fault protection
> +  and voltage and current sensing.
> +  Programming is done through I2C bus.
> +
> +  Datasheets:
> +    https://datasheets.maximintegrated.com/en/ds/MAX5970.pdf
> +    https://datasheets.maximintegrated.com/en/ds/MAX5978.pdf
> +
> +properties:
> +  compatible:
> +    enum:
> +      - maxim,max5970
> +      - maxim,max5978
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  leds:
> +    type: object
> +    description:
> +      Properties for single channel.
> +
> +    patternProperties:
> +      "^led@[0-3]$":
> +        $ref: /schemas/leds/common.yaml#
> +        type: object
> +
> +    additionalProperties: true
> +
> +  vss1-supply:
> +    description: Supply of the first channel.
> +
> +  vss2-supply:
> +    description: Supply of the first channel.
> +
> +  "#io-channel-cells":
> +    const: 1
> +
> +  regulators:
> +    type: object
> +    description:
> +      Properties for single channel.
> +
> +    patternProperties:
> +      "^(sw[0-1])$":
> +        $ref: /schemas/regulator/regulator.yaml#
> +        type: object
> +
> +      shunt-resistor-micro-ohms:
> +        description: |
> +          The value of curent sense resistor in microohms.
> +          Must be specified for each channel.
> +
> +    additionalProperties: true

We did not finish discussion and you already sent v7... It's waste of
your effort. Don't send patches too often and do not send new version
while still discussing.

Best regards,
Krzysztof

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ