| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221103212854.2334393-1-sean.anderson@seco.com>
Date: Thu, 3 Nov 2022 17:28:53 -0400
From: Sean Anderson <sean.anderson@...o.com>
To: "David S . Miller" <davem@...emloft.net>, netdev@...r.kernel.org
Cc: devicetree@...r.kernel.org, Michael Ellerman <mpe@...erman.id.au>,
linux-kernel@...r.kernel.org, Rob Herring <robh+dt@...nel.org>,
Christophe Leroy <christophe.leroy@...roup.eu>,
linuxppc-dev@...ts.ozlabs.org, Nicholas Piggin <npiggin@...il.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Sean Anderson <sean.anderson@...o.com>,
Camelia Alexandra Groza <camelia.groza@....com>
Subject: [PATCH net-next] powerpc: dts: t208x: Disable 10G on MAC1 and MAC2
There aren't enough resources to run these ports at 10G speeds. Just
keep the pcs changes, and revert the rest. This is not really correct,
since the hardware could support 10g in some other configuration...
Fixes: 36926a7d70c2 ("powerpc: dts: t208x: Mark MAC1 and MAC2 as 10G")
Reported-by: Camelia Alexandra Groza <camelia.groza@....com>
Signed-off-by: Sean Anderson <sean.anderson@...o.com>
---
.../boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi | 45 -------------------
.../boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi | 45 -------------------
arch/powerpc/boot/dts/fsl/t2081si-post.dtsi | 6 ++-
3 files changed, 4 insertions(+), 92 deletions(-)
delete mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
delete mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
deleted file mode 100644
index 6b3609574b0f..000000000000
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
+++ /dev/null
@@ -1,45 +0,0 @@
-// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later
-/*
- * QorIQ FMan v3 10g port #2 device tree stub [ controller @ offset 0x400000 ]
- *
- * Copyright 2022 Sean Anderson <sean.anderson@...o.com>
- * Copyright 2012 - 2015 Freescale Semiconductor Inc.
- */
-
-fman@...000 {
- fman0_rx_0x08: port@...00 {
- cell-index = <0x8>;
- compatible = "fsl,fman-v3-port-rx";
- reg = <0x88000 0x1000>;
- fsl,fman-10g-port;
- };
-
- fman0_tx_0x28: port@...00 {
- cell-index = <0x28>;
- compatible = "fsl,fman-v3-port-tx";
- reg = <0xa8000 0x1000>;
- fsl,fman-10g-port;
- };
-
- ethernet@...00 {
- cell-index = <0>;
- compatible = "fsl,fman-memac";
- reg = <0xe0000 0x1000>;
- fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
- ptp-timer = <&ptp_timer0>;
- pcsphy-handle = <&pcsphy0>, <&pcsphy0>;
- pcs-handle-names = "sgmii", "xfi";
- };
-
- mdio@...00 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
- reg = <0xe1000 0x1000>;
- fsl,erratum-a011043; /* must ignore read errors */
-
- pcsphy0: ethernet-phy@0 {
- reg = <0x0>;
- };
- };
-};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
deleted file mode 100644
index 28ed1a85a436..000000000000
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
+++ /dev/null
@@ -1,45 +0,0 @@
-// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later
-/*
- * QorIQ FMan v3 10g port #3 device tree stub [ controller @ offset 0x400000 ]
- *
- * Copyright 2022 Sean Anderson <sean.anderson@...o.com>
- * Copyright 2012 - 2015 Freescale Semiconductor Inc.
- */
-
-fman@...000 {
- fman0_rx_0x09: port@...00 {
- cell-index = <0x9>;
- compatible = "fsl,fman-v3-port-rx";
- reg = <0x89000 0x1000>;
- fsl,fman-10g-port;
- };
-
- fman0_tx_0x29: port@...00 {
- cell-index = <0x29>;
- compatible = "fsl,fman-v3-port-tx";
- reg = <0xa9000 0x1000>;
- fsl,fman-10g-port;
- };
-
- ethernet@...00 {
- cell-index = <1>;
- compatible = "fsl,fman-memac";
- reg = <0xe2000 0x1000>;
- fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
- ptp-timer = <&ptp_timer0>;
- pcsphy-handle = <&pcsphy1>, <&pcsphy1>;
- pcs-handle-names = "sgmii", "xfi";
- };
-
- mdio@...00 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
- reg = <0xe3000 0x1000>;
- fsl,erratum-a011043; /* must ignore read errors */
-
- pcsphy1: ethernet-phy@0 {
- reg = <0x0>;
- };
- };
-};
diff --git a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
index 74e17e134387..fed3879fa0aa 100644
--- a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
@@ -609,8 +609,8 @@ usb1: usb@...000 {
/include/ "qoriq-bman1.dtsi"
/include/ "qoriq-fman3-0.dtsi"
-/include/ "qoriq-fman3-0-10g-2.dtsi"
-/include/ "qoriq-fman3-0-10g-3.dtsi"
+/include/ "qoriq-fman3-0-1g-2.dtsi"
+/include/ "qoriq-fman3-0-1g-3.dtsi"
/include/ "qoriq-fman3-0-1g-2.dtsi"
/include/ "qoriq-fman3-0-1g-3.dtsi"
/include/ "qoriq-fman3-0-1g-4.dtsi"
@@ -619,9 +619,11 @@ usb1: usb@...000 {
/include/ "qoriq-fman3-0-10g-1.dtsi"
fman@...000 {
enet0: ethernet@...00 {
+ pcs-handle-names = "sgmii", "xfi";
};
enet1: ethernet@...00 {
+ pcs-handle-names = "sgmii", "xfi";
};
enet2: ethernet@...00 {
--
2.35.1.1320.gc452695387.dirty
Powered by blists - more mailing lists