| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 2 Nov 2022 20:53:44 -0400
From: Richard Acayan <mailingradian@...il.com>
To: Konrad Dybcio <konrad.dybcio@...ainline.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Vinod Koul <vkoul@...nel.org>,
Robin Murphy <robin.murphy@....com>,
Chanho Park <chanho61.park@...sung.com>,
Thierry Reding <treding@...dia.com>,
Stephan Gerhold <stephan.gerhold@...nkonzept.com>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Robert Marko <robimarko@...il.com>,
Das Srinagesh <quic_gurus@...cinc.com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-msm@...r.kernel.org
Cc: ~postmarketos/upstreaming@...ts.sr.ht, phone-devel@...r.kernel.org,
Richard Acayan <mailingradian@...il.com>
Subject: Re: [PATCH 4/4] arm64: dts: qcom: add sdm670 and pixel 3a device
trees
On Wed, Nov 02, 2022 at 09:26:13PM +0100, Konrad Dybcio wrote:
> On 02/11/2022 00:57, Richard Acayan wrote:
>> The Qualcomm Snapdragon 670 has been out for a while. Add a device tree
>> for it and the Google Pixel 3a as the first device.
>>
>> The Pixel 3a has the same bootloader issue as the Pixel 3 and will not work
>> on Android 10 bootloaders or later until it gets fixed for the Pixel 3.
>>
>> SoC Initial Features:
>> - power management
>> - clocks
>> - pinctrl
>> - eMMC
>> - USB 2.0
>> - GENI I2C
>> - IOMMU
>> - RPMh
>> - interrupts
>>
>> Device-Specific Initial Features:
>> - side buttons (keys)
>> - regulators
>> - touchscreen
>>
>> Signed-off-by: Richard Acayan <mailingradian@...il.com>
>> ---
>> arch/arm64/boot/dts/qcom/Makefile | 1 +
>> .../boot/dts/qcom/sdm670-google-sargo.dts | 519 +++++++
>> arch/arm64/boot/dts/qcom/sdm670.dtsi | 1216 +++++++++++++++++
>> 3 files changed, 1736 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
>> create mode 100644 arch/arm64/boot/dts/qcom/sdm670.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>> index b0558d3389e5..4eb5d8829efb 100644
>> --- a/arch/arm64/boot/dts/qcom/Makefile
>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>> @@ -124,6 +124,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-voyager.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += sdm632-fairphone-fp3.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += sdm636-sony-xperia-ganges-mermaid.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += sdm660-xiaomi-lavender.dtb
>> +dtb-$(CONFIG_ARCH_QCOM) += sdm670-google-sargo.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r1.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb
>> diff --git a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
>> new file mode 100644
>> index 000000000000..fa3dee78e442
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
>> @@ -0,0 +1,519 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Device tree for Google Pixel 3a, adapted from google-blueline device tree,
>> + * xiaomi-lavender device tree, and oneplus-common device tree.
>> + *
>> + * Copyright (c) 2022, Richard Acayan. All rights reserved.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/input/input.h>
>> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
>> +#include <dt-bindings/power/qcom-rpmpd.h>
>> +#include "sdm670.dtsi"
>> +#include "pm660.dtsi"
>> +#include "pm660l.dtsi"
>> +
>> +/delete-node/ &mpss_region;
>> +/delete-node/ &venus_mem;
>> +/delete-node/ &wlan_msa_mem;
>> +/delete-node/ &cdsp_mem;
>> +/delete-node/ &mba_region;
>> +/delete-node/ &adsp_mem;
>> +/delete-node/ &ipa_fw_mem;
>> +/delete-node/ &ipa_gsi_mem;
>> +/delete-node/ &gpu_mem;
>> +
>> +/ {
>> + model = "Google Pixel 3a";
>> + compatible = "google,sargo", "qcom,sdm670";
>> + qcom,board-id = <0x00041e05 0>;
>> + qcom,msm-id = <321 0x20001>;
>> +
>> + aliases { };
>> +
>> + chosen {
>> + stdout-path = "serial0:115200n8";
>> +
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> +
>> + framebuffer@...00000 {
>> + compatible = "simple-framebuffer";
>> + reg = <0x0 0x9c000000 0x0 (1080 * 2220 * 4)>;
>> + width = <1080>;
>> + height = <2220>;
>> + stride = <(1080 * 4)>;
>> + format = "a8r8g8b8";
>> + };
>> + };
>> +
>> + reserved-memory {
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> +
>> + mpss_region: mpss@...00000 {
>
> Please call the nodes memory@
Ignoring.
>
>
>> + reg = <0 0x8b000000 0 0x9800000>;
>> + no-map;
>> + };
>> +
>> + venus_mem: venus@...00000 {
>> + reg = <0 0x94800000 0 0x500000>;
>> + no-map;
>> + };
>> +
>> + wlan_msa_mem: wlan-msa@...00000 {
>> + reg = <0 0x94d00000 0 0x100000>;
>> + no-map;
>> + };
>> +
>> + cdsp_mem: cdsp@...00000 {
>> + reg = <0 0x94e00000 0 0x800000>;
>> + no-map;
>> + };
>> +
>> + mba_region: mba@...00000 {
>> + reg = <0 0x95600000 0 0x200000>;
>> + no-map;
>> + };
>> +
>> + adsp_mem: adsp@...00000 {
>> + reg = <0 0x95800000 0 0x2200000>;
>> + no-map;
>> + };
>> +
>> + ipa_fw_mem: ipa-fw@...00000 {
>> + reg = <0 0x97a00000 0 0x10000>;
>> + no-map;
>> + };
>> +
>> + ipa_gsi_mem: ipa-gsi@...10000 {
>> + reg = <0 0x97a10000 0 0x5000>;
>> + no-map;
>> + };
>> +
>> + gpu_mem: gpu@...15000 {
>> + reg = <0 0x97a15000 0 0x2000>;
>> + no-map;
>> + };
>> +
>> + framebuffer-region@...00000 {
>> + reg = <0 0x9c000000 0 0x2400000>;
>> + no-map;
>> + };
>> +
>> + /* Also includes ramoops regions */
>
> Isn't that counter-intuitive? Linux won't see it as ramoops then.
Well, if it doesn't work, I don't want to pretend that it does.
The last time I tested ramoops time I tested ramoops was when there was
no simplefb, usb, or mmc. I could only test ramoops with an Android
recovery, and it didn't seem to function. I'll test the ramoops region
again before the next version and add it if it works.
>
>
>> + debug_info_mem: debug-info@...00000 {
>> + reg = <0 0xa1800000 0 0x411000>;
>> + no-map;
>> + };
>> + };
>> +
>> + /*
>> + * Supply map from xiaomi-lavender specifies this as the supply for
>> + * ldob1, ldob9, ldob10, ldoa2, and ldoa3, while downstream specifies
>> + * this as a power domain. Set this as a fixed regulator with the same
>> + * voltage as lavender until display is needed to avoid unneccessarily
>> + * using a deprecated binding (regulator-fixed-domain).
>> + */
>> + vreg_s2b_1p05: vreg-s2b-regulator {
>> + compatible = "regulator-fixed";
>> + regulator-name = "vreg_s2b";
>> + regulator-min-microvolt = <1050000>;
>> + regulator-max-microvolt = <1050000>;
>> + };
>> +
>> + vph_pwr: vph-pwr-regulator {
>> + compatible = "regulator-fixed";
>> + regulator-name = "vph_pwr";
>> + regulator-min-microvolt = <3312000>;
>> + regulator-max-microvolt = <3312000>;
>> +
>> + regulator-always-on;
>> + regulator-boot-on;
>> + };
>> +
>> + gpio-keys {
>> + compatible = "gpio-keys";
>> + autorepeat;
>> +
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&vol_up_pin>;
>> +
>> + key-vol-up {
>> + label = "Volume Up";
>> + linux,code = <KEY_VOLUMEUP>;
>> + gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>;
>> + };
>> + };
>> +
>> + /*
>> + * The touchscreen regulator seems to be controlled somehow by a gpio.
>> + * Model it as a fixed regulator and keep it on. Without schematics we
>> + * don't know how this is actually wired up...
>> + */
>> + ts_1p8_supply: ts-1p8-regulator {
>> + compatible = "regulator-fixed";
>> + regulator-name = "ts_1p8_supply";
>> +
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> +
>> + gpio = <&pm660_gpios 12 GPIO_ACTIVE_HIGH>;
>> + enable-active-high;
>> + };
>> +};
>> +
>> +&apps_rsc {
>> + pm660l-regulators {
>
> New bindings changes dictate use of regulator-0 regulator-1 etc
>
> node names. Also, is there any particular reason PMIC_B goes before
>
> PMIC_A?
Renamed for v2.
If I remember correctly, the reason was that bob supplies other
regulators. You couldn't probe a regulator when I was putting this
together. Something must have changed on next, but these can be in their
proper order now.
>
>
>> + compatible = "qcom,pm660l-rpmh-regulators";
>> + qcom,pmic-id = "b";
>> +
>> + vdd-s1-supply = <&vph_pwr>;
>> + vdd-s2-supply = <&vph_pwr>;
>> + vdd-s3-s4-supply = <&vph_pwr>;
>> + vdd-s5-supply = <&vph_pwr>;
>> +
>> + vdd-l1-l9-l10-supply = <&vreg_s2b_1p05>;
>> + vdd-l2-supply = <&vreg_bob>;
>> + vdd-l3-l5-l7-l8-supply = <&vreg_bob>;
>> + vdd-l4-l6-supply = <&vreg_bob>;
>> + vdd-bob-supply = <&vph_pwr>;
>> +
>> + /* LDOs */
>> + vreg_l1b_0p89: ldo1 {
>> + regulator-min-microvolt = <880000>;
>> + regulator-max-microvolt = <900000>;
>> + regulator-enable-ramp-delay = <250>;
>> + };
>> +
>> + vreg_l2b_2p38: ldo2 {
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <2960000>;
>> + regulator-enable-ramp-delay = <250>;
>> + };
>> +
>> + vreg_l3b_2p93: ldo3 {
>> + regulator-min-microvolt = <2850000>;
>> + regulator-max-microvolt = <3008000>;
>> + regulator-enable-ramp-delay = <250>;
>> + };
>> +
>> + vreg_l4b_2p96: ldo4 {
>> + regulator-min-microvolt = <2960000>;
>> + regulator-max-microvolt = <2960000>;
>> + regulator-enable-ramp-delay = <250>;
>> + };
>> +
>> + vreg_l5b_2p96: ldo5 {
>> + regulator-min-microvolt = <2960000>;
>> + regulator-max-microvolt = <2960000>;
>> + regulator-enable-ramp-delay = <250>;
>> + };
>> +
>> + vreg_l6b_3p15: ldo6 {
>> + regulator-min-microvolt = <3008000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-enable-ramp-delay = <250>;
>> + };
>> +
>> + vreg_l7b_3p1: ldo7 {
>> + regulator-min-microvolt = <3088000>;
>> + regulator-max-microvolt = <3100000>;
>> + regulator-enable-ramp-delay = <250>;
>> + };
>> +
>> + vreg_l8b_3p3: ldo8 {
>> + regulator-min-microvolt = <3300000>;
>> + regulator-max-microvolt = <3312000>;
>> + regulator-enable-ramp-delay = <250>;
>> + };
>> +
>> + /*
>> + * Downstream specifies a fixed voltage of 3.312 V, but the
>> + * PMIC4 BOB ranges don't support that. Widen the range a
>> + * little to avoid adding a new BOB regulator type.
>
> Maybe the upstream driver is wrong then. Could somebody with docs recheck
> that?
I'm not sure if this is relevant, but the RPM regulator driver doesn't
support 3.312 V either.
>
> And also pm8350 & pm8350c ranges while at it, pretty please?
>
>
>> + */
>> + vreg_bob: bob {
>> + regulator-min-microvolt = <3296000>;
>> + regulator-max-microvolt = <3328000>;
>> + regulator-enable-ramp-delay = <500>;
>> + };
>> + };
>> +
>> + pm660-regulators {
>> + compatible = "qcom,pm660-rpmh-regulators";
>> + qcom,pmic-id = "a";
>> +
>> + vdd-s1-supply = <&vph_pwr>;
>> + vdd-s2-supply = <&vph_pwr>;
>> + vdd-s3-supply = <&vph_pwr>;
>> + vdd-s4-supply = <&vph_pwr>;
>> + vdd-s5-supply = <&vph_pwr>;
>> + vdd-s6-supply = <&vph_pwr>;
>> +
>> + vdd-l1-l6-l7-supply = <&vreg_s6a_1p29>;
>> + vdd-l2-l3-supply = <&vreg_s2b_1p05>;
>> + vdd-l5-supply = <&vreg_s2b_1p05>;
>> + vdd-l8-l9-l10-l11-l12-l13-l14-supply = <&vreg_s4a_1p92>;
>> + vdd-l15-l16-l17-l18-l19-supply = <&vreg_bob>;
>> +
>> + /*
>> + * S1A (FTAPC0), S2A (FTAPC1), S3A (HFAPC1) are managed
>> + * by the Core Power Reduction hardened (CPRh) and the
>> + * Operating State Manager (OSM) HW automatically.
>> + */
>> +
>> + vreg_s4a_1p92: smps4 {
>> + regulator-min-microvolt = <1808000>;
>> + regulator-max-microvolt = <2040000>;
>> + regulator-enable-ramp-delay = <200>;
>> + };
>> +
>> + vreg_s6a_1p29: smps6 {
>> + regulator-min-microvolt = <1224000>;
>> + regulator-max-microvolt = <1352000>;
>> + regulator-enable-ramp-delay = <150>;
>> + };
>> +
>> + /* LDOs */
>> + vreg_l1a_1p225: ldo1 {
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1250000>;
>> + regulator-enable-ramp-delay = <250>;
>> + };
>> +
>> + vreg_l2a_1p0: ldo2 {
>> + regulator-min-microvolt = <1000000>;
>> + regulator-max-microvolt = <1000000>;
>> + regulator-enable-ramp-delay = <250>;
>> + };
>> +
>> + vreg_l3a_1p0: ldo3 {
>> + regulator-min-microvolt = <1000000>;
>> + regulator-max-microvolt = <1000000>;
>> + regulator-enable-ramp-delay = <250>;
>> + };
>> +
>> + vreg_l5a_0p8: ldo5 {
>> + regulator-min-microvolt = <800000>;
>> + regulator-max-microvolt = <800000>;
>> + regulator-enable-ramp-delay = <250>;
>> + };
>> +
>> + vreg_l6a_1p28: ldo6 {
>> + regulator-min-microvolt = <1248000>;
>> + regulator-max-microvolt = <1304000>;
>> + regulator-enable-ramp-delay = <250>;
>> + };
>> +
>> + vreg_l7a_1p2: ldo7 {
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1200000>;
>> + regulator-enable-ramp-delay = <250>;
>> + };
>> +
>> + vreg_l8a_1p8: ldo8 {
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-enable-ramp-delay = <250>;
>> + };
>> +
>> + vreg_l9a_1p8: ldo9 {
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-enable-ramp-delay = <250>;
>> + };
>> +
>> + vreg_l10a_1p8: ldo10 {
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-enable-ramp-delay = <250>;
>> + };
>> +
>> + vreg_l11a_1p8: ldo11 {
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-enable-ramp-delay = <250>;
>> + };
>> +
>> + vreg_l12a_1p8: ldo12 {
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-enable-ramp-delay = <250>;
>> + };
>> +
>> + vreg_l13a_1p8: ldo13 {
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-enable-ramp-delay = <250>;
>> + };
>> +
>> + vreg_l14a_1p8: ldo14 {
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-enable-ramp-delay = <250>;
>> + };
>> +
>> + vreg_l15a_2p38: ldo15 {
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <2950000>;
>> + regulator-enable-ramp-delay = <250>;
>> + };
>> +
>> + vreg_l16a_2p7: ldo16 {
>> + regulator-min-microvolt = <2696000>;
>> + regulator-max-microvolt = <2696000>;
>> + regulator-enable-ramp-delay = <250>;
>> + };
>> +
>> + vreg_l17a_2p38: ldo17 {
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <2950000>;
>> + regulator-enable-ramp-delay = <250>;
>> + };
>> +
>> + vreg_l19a_3p3: ldo19 {
>> + regulator-min-microvolt = <3000000>;
>> + regulator-max-microvolt = <3312000>;
>> + regulator-enable-ramp-delay = <250>;
>> + };
>> + };
>> +};
>> +
>> +&gpi_dma1 {
>> + status = "okay";
>> +};
>> +
>> +&qupv3_id_1 {
>> + status = "okay";
>> +};
>
> Please sort the & references alphabetically.
Sorted for v2.
>
>
>> +
>> +&i2c9 {
>> + status = "okay";
>
> status should be the last property (still before subnodes - otherwise you'll
> get a DTC error).
>
> This applies to all occurences.
Moved.
>
>
>> + clock-frequency = <100000>;
>> +
>> + synaptics-rmi4-i2c@20 {
>> + compatible = "syna,rmi4-i2c";
>> + reg = <0x20>;
>> + #address-cells = <0x1>;
>> + #size-cells = <0x0>;
>> + interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
>> +
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&touchscreen_default>;
>> +
>> + /* VDD supply isn't specified, bind it to power */
>
> I don't think it would explode if you just removed it then?
Confirmed and removed for v2.
>
>
>> + vdd-supply = <&vph_pwr>;
>> + vio-supply = <&ts_1p8_supply>;
>> +
>> + syna,reset-delay-ms = <200>;
>> + syna,startup-delay-ms = <200>;
>> +
>> + rmi4-f01@1 {
>> + reg = <0x01>;
>> + syna,nosleep-mode = <1>;
>> + };
>> +
>> + rmi4-f12@12 {
>> + reg = <0x12>;
>> + touchscreen-x-mm = <62>;
>> + touchscreen-y-mm = <127>;
>> + syna,sensor-type = <1>;
>> + };
>> + };
>> +};
>> +
>> +&gcc {
>> + protected-clocks = <GCC_QSPI_CORE_CLK>,
>> + <GCC_QSPI_CORE_CLK_SRC>,
>> + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>;
>> +};
>> +
>> +&pm660l_gpios {
>> + vol_up_pin: vol-up-state {
>> + pins = "gpio7";
>> + function = "normal";
>> + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
>> + input-enable;
>> + bias-pull-up;
>> + };
>> +};
>> +
>> +&pon_pwrkey {
>> + status = "okay";
>> +};
>> +
>> +&pon_resin {
>> + status = "okay";
>> + linux,code = <KEY_VOLUMEDOWN>;
>> +};
>> +
>> +&sdhc_1 {
>> + status = "okay";
>> + supports-cqe;
>> + mmc-hs200-1_8v;
>> + mmc-hs400-1_8v;
>> + mmc-ddr-1_8v;
>> +
>> + qcom,ddr-config = <0xc3040873>;
>> +
>> + vmmc-supply = <&vreg_l4b_2p96>;
>> + vqmmc-supply = <&vreg_l8a_1p8>;
>> +};
>> +
>> +&tlmm {
>> + gpio-reserved-ranges = <0 4>, <81 4>;
>> +
>> + touchscreen_default: ts-default-state {
>> + ts-reset-pins {
>> + pins = "gpio99";
>> + function = "gpio";
>> + drive-strength = <2>;
>> + bias-pull-up;
>> + output-high;
>> + };
>> +
>> + ts-irq-pins {
>> + pins = "gpio125";
>> + function = "gpio";
>> + drive-strength = <2>;
>> + bias-disable;
>> + };
>> +
>> + ts-switch-pins {
>> + pins = "gpio135";
>> + function = "gpio";
>> + drive-strength = <2>;
>> + bias-disable;
>> + output-low;
>> + };
>> + };
>> +};
>> +
>> +&usb_1_hsphy {
>> + status = "okay";
>> +
>> + vdd-supply = <&vreg_l1b_0p89>;
>> + vdda-pll-supply = <&vreg_l10a_1p8>;
>> + vdda-phy-dpdm-supply = <&vreg_l7b_3p1>;
>> +};
>> +
>> +&usb_1 {
>> + status = "okay";
>> +
>> + qcom,select-utmi-as-pipe-clk;
>> +};
>> +
>> +&usb_1_dwc3 {
>> + /* Only peripheral works for now */
>> + dr_mode = "peripheral";
>> +
>> + /* Do not assume that sdm670.dtsi will never support USB 3.0 */
>> + phys = <&usb_1_hsphy>;
>> + phy-names = "usb2-phy";
>> + maximum-speed = "high-speed";
>> +};
>> diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi
>> new file mode 100644
>> index 000000000000..4450ece839a0
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi
>> @@ -0,0 +1,1216 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * SDM670 SoC device tree source, adapted from SDM845 SoC device tree
>> + *
>> + * Copyright (c) 2018, The Linux Foundation. All rights reserved.
>> + * Copyright (c) 2022, Richard Acayan. All rights reserved.
>> + */
>> +
>> +#include <dt-bindings/clock/qcom,gcc-sdm845.h>
>> +#include <dt-bindings/clock/qcom,rpmh.h>
>> +#include <dt-bindings/dma/qcom-gpi.h>
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/phy/phy-qcom-qusb2.h>
>> +#include <dt-bindings/power/qcom-rpmpd.h>
>> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
>> +
>> +/ {
>> + interrupt-parent = <&intc>;
>> +
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> +
>> + aliases { };
>> +
>> + chosen { };
>> +
>> + memory@...00000 {
>> + device_type = "memory";
>> + /* We expect the bootloader to fill in the size */
>> + reg = <0 0x80000000 0 0>;
>> + };
>> +
>> + reserved-memory {
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> +
>> + hyp_mem: hyp-mem@...00000 {
>> + reg = <0 0x85700000 0 0x600000>;
>> + no-map;
>> + };
>> +
>> + xbl_mem: xbl-mem@...00000 {
>> + reg = <0 0x85e00000 0 0x100000>;
>> + no-map;
>> + };
>> +
>> + aop_mem: aop-mem@...c0000 {
>> + reg = <0 0x85fc0000 0 0x20000>;
>> + no-map;
>> + };
>> +
>> + aop_cmd_db_mem: aop-cmd-db-mem@...e0000 {
>> + compatible = "qcom,cmd-db";
>> + reg = <0x0 0x85fe0000 0 0x20000>;
>> + no-map;
>> + };
>> +
>> + camera_mem: camera-mem@...00000 {
>> + reg = <0 0x8ab00000 0 0x500000>;
>> + no-map;
>> + };
>> +
>> + mpss_region: mpss@...00000 {
>> + reg = <0 0x8b000000 0 0x7e00000>;
>> + no-map;
>> + };
>> +
>> + venus_mem: venus@...00000 {
>> + reg = <0 0x92e00000 0 0x500000>;
>> + no-map;
>> + };
>> +
>> + wlan_msa_mem: wlan-msa@...00000 {
>> + reg = <0 0x93300000 0 0x100000>;
>> + no-map;
>> + };
>> +
>> + cdsp_mem: cdsp@...00000 {
>> + reg = <0 0x93400000 0 0x800000>;
>> + no-map;
>> + };
>> +
>> + mba_region: mba@...00000 {
>> + reg = <0 0x93c00000 0 0x200000>;
>> + no-map;
>> + };
>> +
>> + adsp_mem: adsp@...00000 {
>> + reg = <0 0x93e00000 0 0x1e00000>;
>> + no-map;
>> + };
>> +
>> + ipa_fw_mem: ipa-fw@...00000 {
>> + reg = <0 0x95c00000 0 0x10000>;
>> + no-map;
>> + };
>> +
>> + ipa_gsi_mem: ipa-gsi@...10000 {
>> + reg = <0 0x95c10000 0 0x5000>;
>> + no-map;
>> + };
>> +
>> + gpu_mem: gpu@...15000 {
>> + reg = <0 0x95c15000 0 0x2000>;
>> + no-map;
>> + };
>> +
>> + spss_mem: spss@...00000 {
>> + reg = <0 0x97b00000 0 0x100000>;
>> + no-map;
>> + };
>> +
>> + qseecom_mem: qseecom@...00000 {
>> + reg = <0 0x9e400000 0 0x1400000>;
>> + no-map;
>> + };
>> + };
>> +
>> + cpus {
>> + #address-cells = <2>;
>> + #size-cells = <0>;
>> +
>> + CPU0: cpu@0 {
>> + device_type = "cpu";
>> + compatible = "qcom,kryo360";
>> + reg = <0x0 0x0>;
>> + enable-method = "psci";
>> + power-domains = <&CPU_PD0>;
>> + power-domain-names = "psci";
>> + next-level-cache = <&L2_0>;
>> + L2_0: l2-cache {
>> + compatible = "cache";
>> + next-level-cache = <&L3_0>;
>> + L3_0: l3-cache {
>> + compatible = "cache";
>> + };
>> + };
>> + };
>> +
>> + CPU1: cpu@100 {
>> + device_type = "cpu";
>> + compatible = "qcom,kryo360";
>> + reg = <0x0 0x100>;
>> + enable-method = "psci";
>> + power-domains = <&CPU_PD1>;
>> + power-domain-names = "psci";
>> + next-level-cache = <&L2_100>;
>> + L2_100: l2-cache {
>> + compatible = "cache";
>> + next-level-cache = <&L3_0>;
>> + };
>> + };
>> +
>> + CPU2: cpu@200 {
>> + device_type = "cpu";
>> + compatible = "qcom,kryo360";
>> + reg = <0x0 0x200>;
>> + enable-method = "psci";
>> + power-domains = <&CPU_PD2>;
>> + power-domain-names = "psci";
>> + next-level-cache = <&L2_200>;
>> + L2_200: l2-cache {
>> + compatible = "cache";
>> + next-level-cache = <&L3_0>;
>> + };
>> + };
>> +
>> + CPU3: cpu@300 {
>> + device_type = "cpu";
>> + compatible = "qcom,kryo360";
>> + reg = <0x0 0x300>;
>> + enable-method = "psci";
>> + power-domains = <&CPU_PD3>;
>> + power-domain-names = "psci";
>> + next-level-cache = <&L2_300>;
>> + L2_300: l2-cache {
>> + compatible = "cache";
>> + next-level-cache = <&L3_0>;
>> + };
>> + };
>> +
>> + CPU4: cpu@400 {
>> + device_type = "cpu";
>> + compatible = "qcom,kryo360";
>> + reg = <0x0 0x400>;
>> + enable-method = "psci";
>> + power-domains = <&CPU_PD4>;
>> + power-domain-names = "psci";
>> + next-level-cache = <&L2_400>;
>> + L2_400: l2-cache {
>> + compatible = "cache";
>> + next-level-cache = <&L3_0>;
>> + };
>> + };
>> +
>> + CPU5: cpu@500 {
>> + device_type = "cpu";
>> + compatible = "qcom,kryo360";
>> + reg = <0x0 0x500>;
>> + enable-method = "psci";
>> + power-domains = <&CPU_PD5>;
>> + power-domain-names = "psci";
>> + next-level-cache = <&L2_500>;
>> + L2_500: l2-cache {
>> + compatible = "cache";
>> + next-level-cache = <&L3_0>;
>> + };
>> + };
>> +
>> + CPU6: cpu@600 {
>> + device_type = "cpu";
>> + compatible = "qcom,kryo360";
>> + reg = <0x0 0x600>;
>> + enable-method = "psci";
>> + power-domains = <&CPU_PD6>;
>> + power-domain-names = "psci";
>> + next-level-cache = <&L2_600>;
>> + L2_600: l2-cache {
>> + compatible = "cache";
>> + next-level-cache = <&L3_0>;
>> + };
>> + };
>> +
>> + CPU7: cpu@700 {
>> + device_type = "cpu";
>> + compatible = "qcom,kryo360";
>> + reg = <0x0 0x700>;
>> + enable-method = "psci";
>> + power-domains = <&CPU_PD7>;
>> + power-domain-names = "psci";
>> + next-level-cache = <&L2_700>;
>> + L2_700: l2-cache {
>> + compatible = "cache";
>> + next-level-cache = <&L3_0>;
>> + };
>> + };
>> +
>> + cpu-map {
>> + cluster0 {
>> + core0 {
>> + cpu = <&CPU0>;
>> + };
>> +
>> + core1 {
>> + cpu = <&CPU1>;
>> + };
>> +
>> + core2 {
>> + cpu = <&CPU2>;
>> + };
>> +
>> + core3 {
>> + cpu = <&CPU3>;
>> + };
>> +
>> + core4 {
>> + cpu = <&CPU4>;
>> + };
>> +
>> + core5 {
>> + cpu = <&CPU5>;
>> + };
>> +
>> + core6 {
>> + cpu = <&CPU6>;
>> + };
>> +
>> + core7 {
>> + cpu = <&CPU7>;
>> + };
>> + };
>> + };
>> +
>> + idle-states {
>> + entry-method = "psci";
>> +
>> + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
>> + compatible = "arm,idle-state";
>> + idle-state-name = "little-rail-power-collapse";
>> + arm,psci-suspend-param = <0x40000004>;
>> + entry-latency-us = <702>;
>> + exit-latency-us = <915>;
>> + min-residency-us = <1617>;
>> + local-timer-stop;
>> + };
>> +
>> + BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
>> + compatible = "arm,idle-state";
>> + idle-state-name = "big-rail-power-collapse";
>> + arm,psci-suspend-param = <0x40000004>;
>> + entry-latency-us = <526>;
>> + exit-latency-us = <1854>;
>> + min-residency-us = <2380>;
>> + local-timer-stop;
>> + };
>> + };
>> +
>> + domain-idle-states {
>> + CLUSTER_SLEEP_0: cluster-sleep-0 {
>> + compatible = "domain-idle-state";
>> + arm,psci-suspend-param = <0x4100c244>;
>> + entry-latency-us = <3263>;
>> + exit-latency-us = <6562>;
>> + min-residency-us = <9825>;
>> + };
>> + };
>> + };
>> +
>> + timer {
>> + compatible = "arm,armv8-timer";
>> + interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
>> + <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
>> + <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
>> + <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
>> + };
>> +
>> + clocks {
>
> Please sort nodes alphabetically.
Sorted for next version.
>
>
>> + xo_board: xo-board {
>> + compatible = "fixed-clock";
>> + #clock-cells = <0>;
>> + clock-frequency = <38400000>;
>
> clock-frequency should be moved to the board DTS to indicate it's not
>
> a part of the SoC itself, but rather it sits on the board.
I don't know if you got this, because it wasn't sent to you directly,
but this thread suggests that the entire clocks should perhaps move:
https://lore.kernel.org/linux-arm-msm/bb2e92c8-8e19-8840-c1ec-8c7ef667fdbf@quicinc.com/
Full context:
https://lore.kernel.org/linux-arm-msm/Y1GCs6uCz5o9az+v@gerhold.net/
Should I move the entire clocks node?
>
>
>> + clock-output-names = "xo_board";
>
> This should actually not be necessary, if you pass "xo" to rpmcc..
Confirmed, it is not.
>
>
>
>> + };
>> +
>> + sleep_clk: sleep-clk {
>> + compatible = "fixed-clock";
>> + #clock-cells = <0>;
>> + clock-frequency = <32764>;
>> + };
>> + };
>> +
>> + firmware {
>> + scm {
>> + compatible = "qcom,scm-sdm670", "qcom,scm";
>> + };
>> + };
>> +
>> + psci {
>> + compatible = "arm,psci-1.0";
>> + method = "smc";
>> +
>> + CPU_PD0: power-domain-cpu0 {
>> + #power-domain-cells = <0>;
>> + power-domains = <&CLUSTER_PD>;
>> + domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
>> + };
>> +
>> + CPU_PD1: power-domain-cpu1 {
>> + #power-domain-cells = <0>;
>> + power-domains = <&CLUSTER_PD>;
>> + domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
>> + };
>> +
>> + CPU_PD2: power-domain-cpu2 {
>> + #power-domain-cells = <0>;
>> + power-domains = <&CLUSTER_PD>;
>> + domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
>> + };
>> +
>> + CPU_PD3: power-domain-cpu3 {
>> + #power-domain-cells = <0>;
>> + power-domains = <&CLUSTER_PD>;
>> + domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
>> + };
>> +
>> + CPU_PD4: power-domain-cpu4 {
>> + #power-domain-cells = <0>;
>> + power-domains = <&CLUSTER_PD>;
>> + domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
>> + };
>> +
>> + CPU_PD5: power-domain-cpu5 {
>> + #power-domain-cells = <0>;
>> + power-domains = <&CLUSTER_PD>;
>> + domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
>> + };
>> +
>> + CPU_PD6: power-domain-cpu6 {
>> + #power-domain-cells = <0>;
>> + power-domains = <&CLUSTER_PD>;
>> + domain-idle-states = <&BIG_CPU_SLEEP_0>;
>> + };
>> +
>> + CPU_PD7: power-domain-cpu7 {
>> + #power-domain-cells = <0>;
>> + power-domains = <&CLUSTER_PD>;
>> + domain-idle-states = <&BIG_CPU_SLEEP_0>;
>> + };
>> +
>> + CLUSTER_PD: power-domain-cluster {
>> + #power-domain-cells = <0>;
>> + domain-idle-states = <&CLUSTER_SLEEP_0>;
>> + };
>> + };
>> +
>> + soc: soc@0 {
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges = <0 0 0 0 0x10 0>;
>> + dma-ranges = <0 0 0 0 0x10 0>;
>> + compatible = "simple-bus";
>> +
>> + gcc: clock-controller@...000 {
>> + compatible = "qcom,gcc-sdm670";
>> + reg = <0 0x00100000 0 0x1f0000>;
>> + clocks = <&rpmhcc RPMH_CXO_CLK>,
>> + <&rpmhcc RPMH_CXO_CLK_A>,
>> + <&sleep_clk>;
>> + clock-names = "bi_tcxo",
>> + "bi_tcxo_ao",
>> + "sleep_clk";
>> + #clock-cells = <1>;
>> + #reset-cells = <1>;
>> + #power-domain-cells = <1>;
>> + };
>> +
>> + sdhc_1: mmc@...000 {
>> + compatible = "qcom,sdm670-sdhci", "qcom,sdhci-msm-v5";
>> + reg = <0 0x007c4000 0 0x1000>,
>> + <0 0x007c5000 0 0x1000>,
>> + <0 0x007c8000 0 0x8000>;
>> + reg-names = "hc", "cqhci", "ice";
>> +
>> + interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "hc_irq", "pwr_irq";
>> +
>> + clocks = <&gcc GCC_SDCC1_AHB_CLK>,
>> + <&gcc GCC_SDCC1_APPS_CLK>,
>> + <&rpmhcc RPMH_CXO_CLK>,
>> + <&gcc GCC_SDCC1_ICE_CORE_CLK>,
>> + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>;
>> + clock-names = "iface", "core", "xo", "ice", "bus";
>> +
>> + iommus = <&apps_smmu 0x140 0xf>;
>> +
>> + pinctrl-names = "default", "sleep";
>> + pinctrl-0 = <&sdc1_state_on>;
>> + pinctrl-1 = <&sdc1_state_off>;
>> + power-domains = <&rpmhpd SDM670_CX>;
>> +
>> + bus-width = <8>;
>> + non-removable;
>> +
>> + status = "disabled";
>> + };
>> +
>> + gpi_dma0: dma-controller@...000 {
>> + #dma-cells = <3>;
>> + compatible = "qcom,sdm670-gpi-dma", "qcom,sdm845-gpi-dma";
>> + reg = <0 0x00800000 0 0x60000>;
>> + interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
>> + dma-channels = <13>;
>> + dma-channel-mask = <0xfa>;
>> + iommus = <&apps_smmu 0x0016 0x0>;
>> + status = "disabled";
>> + };
>> +
>> + qupv3_id_0: geniqup@...000 {
>> + compatible = "qcom,geni-se-qup";
>> + reg = <0 0x008c0000 0 0x6000>;
>> + clock-names = "m-ahb", "s-ahb";
>> + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
>> + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
>> + iommus = <&apps_smmu 0x3 0x0>;
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>;
>> + interconnect-names = "qup-core";
>> + status = "disabled";
>> +
>> + i2c0: i2c@...000 {
>> + compatible = "qcom,geni-i2c";
>> + reg = <0 0x00880000 0 0x4000>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_i2c0_default>;
>> + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + power-domains = <&rpmhpd SDM670_CX>;
>> + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
>> + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
>> + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
>> + interconnect-names = "qup-core", "qup-config", "qup-memory";
>> + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
>> + <&gpi_dma0 1 0 QCOM_GPI_I2C>;
>> + dma-names = "tx", "rx";
>> + status = "disabled";
>> + };
>> +
>> + i2c1: i2c@...000 {
>> + compatible = "qcom,geni-i2c";
>> + reg = <0 0x00884000 0 0x4000>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_i2c1_default>;
>> + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + power-domains = <&rpmhpd SDM670_CX>;
>> + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
>> + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
>> + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
>> + interconnect-names = "qup-core", "qup-config", "qup-memory";
>> + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
>> + <&gpi_dma0 1 1 QCOM_GPI_I2C>;
>> + dma-names = "tx", "rx";
>> + status = "disabled";
>> + };
>> +
>> + i2c2: i2c@...000 {
>> + compatible = "qcom,geni-i2c";
>> + reg = <0 0x00888000 0 0x4000>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_i2c2_default>;
>> + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + power-domains = <&rpmhpd SDM670_CX>;
>> + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
>> + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
>> + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
>> + interconnect-names = "qup-core", "qup-config", "qup-memory";
>> + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
>> + <&gpi_dma0 1 2 QCOM_GPI_I2C>;
>> + dma-names = "tx", "rx";
>> + status = "disabled";
>> + };
>> +
>> + i2c3: i2c@...000 {
>> + compatible = "qcom,geni-i2c";
>> + reg = <0 0x0088c000 0 0x4000>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_i2c3_default>;
>> + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + power-domains = <&rpmhpd SDM670_CX>;
>> + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
>> + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
>> + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
>> + interconnect-names = "qup-core", "qup-config", "qup-memory";
>> + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
>> + <&gpi_dma0 1 3 QCOM_GPI_I2C>;
>> + dma-names = "tx", "rx";
>> + status = "disabled";
>> + };
>> +
>> + i2c4: i2c@...000 {
>> + compatible = "qcom,geni-i2c";
>> + reg = <0 0x00890000 0 0x4000>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_i2c4_default>;
>> + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + power-domains = <&rpmhpd SDM670_CX>;
>> + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
>> + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
>> + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
>> + interconnect-names = "qup-core", "qup-config", "qup-memory";
>> + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
>> + <&gpi_dma0 1 4 QCOM_GPI_I2C>;
>> + dma-names = "tx", "rx";
>> + status = "disabled";
>> + };
>> +
>> + i2c5: i2c@...000 {
>> + compatible = "qcom,geni-i2c";
>> + reg = <0 0x00894000 0 0x4000>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_i2c5_default>;
>> + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + power-domains = <&rpmhpd SDM670_CX>;
>> + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
>> + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
>> + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
>> + interconnect-names = "qup-core", "qup-config", "qup-memory";
>> + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
>> + <&gpi_dma0 1 5 QCOM_GPI_I2C>;
>> + dma-names = "tx", "rx";
>> + status = "disabled";
>> + };
>> +
>> + i2c6: i2c@...000 {
>> + compatible = "qcom,geni-i2c";
>> + reg = <0 0x00898000 0 0x4000>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_i2c6_default>;
>> + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + power-domains = <&rpmhpd SDM670_CX>;
>> + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
>> + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
>> + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
>> + interconnect-names = "qup-core", "qup-config", "qup-memory";
>> + dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
>> + <&gpi_dma0 1 6 QCOM_GPI_I2C>;
>> + dma-names = "tx", "rx";
>> + status = "disabled";
>> + };
>> +
>> + i2c7: i2c@...000 {
>> + compatible = "qcom,geni-i2c";
>> + reg = <0 0x0089c000 0 0x4000>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_i2c7_default>;
>> + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + power-domains = <&rpmhpd SDM670_CX>;
>> + interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
>> + <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
>> + <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
>> + interconnect-names = "qup-core", "qup-config", "qup-memory";
>> + dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
>> + <&gpi_dma0 1 7 QCOM_GPI_I2C>;
>> + dma-names = "tx", "rx";
>> + status = "disabled";
>> + };
>> + };
>> +
>> + gpi_dma1: dma-controller@...000 {
>> + #dma-cells = <3>;
>> + compatible = "qcom,sdm670-gpi-dma", "qcom,sdm845-gpi-dma";
>> + reg = <0 0x00a00000 0 0x60000>;
>> + interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
>> + dma-channels = <13>;
>> + dma-channel-mask = <0xfa>;
>> + iommus = <&apps_smmu 0x06d6 0x0>;
>> + status = "disabled";
>> + };
>> +
>> + qupv3_id_1: geniqup@...000 {
>> + compatible = "qcom,geni-se-qup";
>> + reg = <0 0x00ac0000 0 0x6000>;
>> + clock-names = "m-ahb", "s-ahb";
>> + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
>> + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
>> + iommus = <&apps_smmu 0x6c3 0x0>;
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> + status = "disabled";
>> +
>> + i2c8: i2c@...000 {
>> + compatible = "qcom,geni-i2c";
>> + reg = <0 0x00a80000 0 0x4000>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_i2c8_default>;
>> + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + power-domains = <&rpmhpd SDM670_CX>;
>> + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
>> + <&gpi_dma1 1 0 QCOM_GPI_I2C>;
>> + dma-names = "tx", "rx";
>> + status = "disabled";
>> + };
>> +
>> + i2c9: i2c@...000 {
>> + compatible = "qcom,geni-i2c";
>> + reg = <0 0x00a84000 0 0x4000>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_i2c9_default>;
>> + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + power-domains = <&rpmhpd SDM670_CX>;
>> + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
>> + <&gpi_dma1 1 1 QCOM_GPI_I2C>;
>> + dma-names = "tx", "rx";
>> + status = "disabled";
>> + };
>> +
>> + i2c10: i2c@...000 {
>> + compatible = "qcom,geni-i2c";
>> + reg = <0 0x00a88000 0 0x4000>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_i2c10_default>;
>> + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + power-domains = <&rpmhpd SDM670_CX>;
>> + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
>> + <&gpi_dma1 1 2 QCOM_GPI_I2C>;
>> + dma-names = "tx", "rx";
>> + status = "disabled";
>> + };
>> +
>> + i2c11: i2c@...000 {
>> + compatible = "qcom,geni-i2c";
>> + reg = <0 0x00a8c000 0 0x4000>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_i2c11_default>;
>> + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + power-domains = <&rpmhpd SDM670_CX>;
>> + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
>> + <&gpi_dma1 1 3 QCOM_GPI_I2C>;
>> + dma-names = "tx", "rx";
>> + status = "disabled";
>> + };
>> +
>> + i2c12: i2c@...000 {
>> + compatible = "qcom,geni-i2c";
>> + reg = <0 0x00a90000 0 0x4000>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_i2c12_default>;
>> + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + power-domains = <&rpmhpd SDM670_CX>;
>> + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
>> + <&gpi_dma1 1 4 QCOM_GPI_I2C>;
>> + dma-names = "tx", "rx";
>> + status = "disabled";
>> + };
>> +
>> + i2c13: i2c@...000 {
>> + compatible = "qcom,geni-i2c";
>> + reg = <0 0x00a94000 0 0x4000>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_i2c13_default>;
>> + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + power-domains = <&rpmhpd SDM670_CX>;
>> + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
>> + <&gpi_dma1 1 5 QCOM_GPI_I2C>;
>> + dma-names = "tx", "rx";
>> + status = "disabled";
>> + };
>> +
>> + i2c14: i2c@...000 {
>> + compatible = "qcom,geni-i2c";
>> + reg = <0 0x00a98000 0 0x4000>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_i2c14_default>;
>> + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + power-domains = <&rpmhpd SDM670_CX>;
>> + dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
>> + <&gpi_dma1 1 6 QCOM_GPI_I2C>;
>> + dma-names = "tx", "rx";
>> + status = "disabled";
>> + };
>> +
>> + i2c15: i2c@...000 {
>> + compatible = "qcom,geni-i2c";
>> + reg = <0 0x00a9c000 0 0x4000>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_i2c15_default>;
>> + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + power-domains = <&rpmhpd SDM670_CX>;
>> + dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
>> + <&gpi_dma1 1 7 QCOM_GPI_I2C>;
>> + dma-names = "tx", "rx";
>> + status = "disabled";
>> + };
>> + };
>> +
>> + tlmm: pinctrl@...0000 {
>> + compatible = "qcom,sdm670-tlmm";
>> + reg = <0 0x03400000 0 0xc00000>;
>> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + gpio-ranges = <&tlmm 0 0 151>;
>> +
>> + qup_i2c0_default: qup-i2c0-default-state {
>> + pins = "gpio0", "gpio1";
>> + function = "qup0";
>> + };
>> +
>> + qup_i2c1_default: qup-i2c1-default-state {
>> + pins = "gpio17", "gpio18";
>> + function = "qup1";
>> + };
>> +
>> + qup_i2c2_default: qup-i2c2-default-state {
>> + pins = "gpio27", "gpio28";
>> + function = "qup2";
>> + };
>> +
>> + qup_i2c3_default: qup-i2c3-default-state {
>> + pins = "gpio41", "gpio42";
>> + function = "qup3";
>> + };
>> +
>> + qup_i2c4_default: qup-i2c4-default-state {
>> + pins = "gpio89", "gpio90";
>> + function = "qup4";
>> + };
>> +
>> + qup_i2c5_default: qup-i2c5-default-state {
>> + pins = "gpio85", "gpio86";
>> + function = "qup5";
>> + };
>> +
>> + qup_i2c6_default: qup-i2c6-default-state {
>> + pins = "gpio45", "gpio46";
>> + function = "qup6";
>> + };
>> +
>> + qup_i2c7_default: qup-i2c7-default-state {
>> + pins = "gpio93", "gpio94";
>> + function = "qup7";
>> + };
>> +
>> + qup_i2c8_default: qup-i2c8-default-state {
>> + pins = "gpio65", "gpio66";
>> + function = "qup8";
>> + };
>> +
>> + qup_i2c9_default: qup-i2c9-default-state {
>> + pins = "gpio6", "gpio7";
>> + function = "qup9";
>> + };
>> +
>> + qup_i2c10_default: qup-i2c10-default-state {
>> + pins = "gpio55", "gpio56";
>> + function = "qup10";
>> + };
>> +
>> + qup_i2c11_default: qup-i2c11-default-state {
>> + pins = "gpio31", "gpio32";
>> + function = "qup11";
>> + };
>> +
>> + qup_i2c12_default: qup-i2c12-default-state {
>> + pins = "gpio49", "gpio50";
>> + function = "qup12";
>> + };
>> +
>> + qup_i2c13_default: qup-i2c13-default-state {
>> + pins = "gpio105", "gpio106";
>> + function = "qup13";
>> + };
>> +
>> + qup_i2c14_default: qup-i2c14-default-state {
>> + pins = "gpio33", "gpio34";
>> + function = "qup14";
>> + };
>> +
>> + qup_i2c15_default: qup-i2c15-default-state {
>> + pins = "gpio81", "gpio82";
>> + function = "qup15";
>> + };
>> +
>> + sdc1_state_on: sdc1-on-state {
>> + clk-pins {
>> + pins = "sdc1_clk";
>> + bias-disable;
>> + drive-strength = <16>;
>> + };
>> +
>> + cmd-pins {
>> + pins = "sdc1_cmd";
>> + bias-pull-up;
>> + drive-strength = <10>;
>> + };
>> +
>> + data-pins {
>> + pins = "sdc1_data";
>> + bias-pull-up;
>> + drive-strength = <10>;
>> + };
>> +
>> + rclk-pins {
>> + pins = "sdc1_rclk";
>> + bias-pull-down;
>> + };
>> + };
>> +
>> + sdc1_state_off: sdc1-off-state {
>> + clk-pins {
>> + pins = "sdc1_clk";
>> + bias-disable;
>> + drive-strength = <2>;
>> + };
>> +
>> + cmd-pins {
>> + pins = "sdc1_cmd";
>> + bias-pull-up;
>> + drive-strength = <2>;
>> + };
>> +
>> + data-pins {
>> + pins = "sdc1_data";
>> + bias-pull-up;
>> + drive-strength = <2>;
>> + };
>> +
>> + rclk-pins {
>> + pins = "sdc1_rclk";
>> + bias-pull-down;
>> + };
>> + };
>> + };
>> +
>> + usb_1_hsphy: phy@...2000 {
>> + compatible = "qcom,sdm670-qusb2-phy", "qcom,qusb2-v2-phy";
>> + reg = <0 0x088e2000 0 0x400>;
>> + status = "disabled";
>
> Status last, please.
Moved (also moved the prop in usb_1).
>
>
>> + #phy-cells = <0>;
>> +
>> + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
>> + <&rpmhcc RPMH_CXO_CLK>;
>> + clock-names = "cfg_ahb", "ref";
>> +
>> + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
>> + };
>> +
>> + usb_1: usb@...8800 {
>> + compatible = "qcom,sdm670-dwc3", "qcom,dwc3";
>> + reg = <0 0x0a6f8800 0 0x400>;
>> + status = "disabled";
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> + dma-ranges;
>> +
>> + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
>> + <&gcc GCC_USB30_PRIM_MASTER_CLK>,
>> + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
>> + <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
>> + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
>> + clock-names = "cfg_noc",
>> + "core",
>> + "iface",
>> + "sleep",
>> + "mock_utmi";
>> +
>> + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
>> + <&gcc GCC_USB30_PRIM_MASTER_CLK>;
>> + assigned-clock-rates = <19200000>, <150000000>;
>> +
>> + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "hs_phy_irq", "ss_phy_irq",
>> + "dm_hs_phy_irq", "dp_hs_phy_irq";
>> +
>> + power-domains = <&gcc USB30_PRIM_GDSC>;
>> +
>> + resets = <&gcc GCC_USB30_PRIM_BCR>;
>> +
>> + usb_1_dwc3: usb@...0000 {
>> + compatible = "snps,dwc3";
>> + reg = <0 0x0a600000 0 0xcd00>;
>> + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
>> + iommus = <&apps_smmu 0x740 0>;
>> + snps,dis_u2_susphy_quirk;
>> + snps,dis_enblslpm_quirk;
>> + phys = <&usb_1_hsphy>;
>> + phy-names = "usb2-phy";
>> + };
>> + };
>> +
>> + spmi_bus: spmi@...0000 {
>> + compatible = "qcom,spmi-pmic-arb";
>> + reg = <0 0x0c440000 0 0x1100>,
>> + <0 0x0c600000 0 0x2000000>,
>> + <0 0x0e600000 0 0x100000>,
>> + <0 0x0e700000 0 0xa0000>,
>> + <0 0x0c40a000 0 0x26000>;
>> + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
>> + interrupt-names = "periph_irq";
>> + interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>;
>> + qcom,ee = <0>;
>> + qcom,channel = <0>;
>> + #address-cells = <2>;
>> + #size-cells = <0>;
>> + interrupt-controller;
>> + #interrupt-cells = <4>;
>> + };
>> +
>> + apps_smmu: iommu@...00000 {
>> + /*
>> + * The hardware tolerates the SDM845 reset quirk. The
>> + * iommu maintainers aren't responding to any patches
>> + * that would add support for new platforms. Set this
>> + * compatible so this dtsi is valid and functional.
>
> Not sure if this is the right approach. SDM670 is more or less a factory
> reject 845,
>
> but the software stack may be hiding some differences..
This compat string is why I don't want this applied just yet.
>
>
> Konrad
>
>> + */
>> + compatible = "qcom,sdm845-smmu-500", "qcom,smmu-500", "arm,mmu-500";
>> + reg = <0 0x15000000 0 0x80000>;
>> + #iommu-cells = <2>;
>> + #global-interrupts = <1>;
>> + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
>> + };
>> +
>> + apps_rsc: rsc@...c0000 {
>> + label = "apps_rsc";
>> + compatible = "qcom,rpmh-rsc";
>> + reg = <0 0x179c0000 0 0x10000>,
>> + <0 0x179d0000 0 0x10000>,
>> + <0 0x179e0000 0 0x10000>;
>> + reg-names = "drv-0", "drv-1", "drv-2";
>> + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
>> + qcom,tcs-offset = <0xd00>;
>> + qcom,drv-id = <2>;
>> + qcom,tcs-config = <ACTIVE_TCS 2>,
>> + <SLEEP_TCS 3>,
>> + <WAKE_TCS 3>,
>> + <CONTROL_TCS 1>;
>> +
>> + apps_bcm_voter: bcm-voter {
>> + compatible = "qcom,bcm-voter";
>> + };
>> +
>> + rpmhcc: clock-controller {
>> + compatible = "qcom,sdm670-rpmh-clk";
>> + #clock-cells = <1>;
>> + clock-names = "xo";
>> + clocks = <&xo_board>;
>> + };
>> +
>> + rpmhpd: power-controller {
>> + compatible = "qcom,sdm670-rpmhpd";
>> + #power-domain-cells = <1>;
>> + operating-points-v2 = <&rpmhpd_opp_table>;
>> +
>> + rpmhpd_opp_table: opp-table {
>> + compatible = "operating-points-v2";
>> +
>> + rpmhpd_opp_ret: opp1 {
>> + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
>> + };
>> +
>> + rpmhpd_opp_min_svs: opp2 {
>> + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
>> + };
>> +
>> + rpmhpd_opp_low_svs: opp3 {
>> + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
>> + };
>> +
>> + rpmhpd_opp_svs: opp4 {
>> + opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
>> + };
>> +
>> + rpmhpd_opp_svs_l1: opp5 {
>> + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
>> + };
>> +
>> + rpmhpd_opp_nom: opp6 {
>> + opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
>> + };
>> +
>> + rpmhpd_opp_nom_l1: opp7 {
>> + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
>> + };
>> +
>> + rpmhpd_opp_nom_l2: opp8 {
>> + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
>> + };
>> +
>> + rpmhpd_opp_turbo: opp9 {
>> + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
>> + };
>> +
>> + rpmhpd_opp_turbo_l1: opp10 {
>> + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
>> + };
>> + };
>> + };
>> + };
>> +
>> + intc: interrupt-controller@...00000 {
>> + compatible = "arm,gic-v3";
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> + #interrupt-cells = <3>;
>> + interrupt-controller;
>> + reg = <0 0x17a00000 0 0x10000>, /* GICD */
>> + <0 0x17a60000 0 0x100000>; /* GICR * 8 */
>> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
>> + };
>> + };
>> +};
Powered by blists - more mailing lists