[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20221104211303.70222-6-sven@svenpeter.dev>
Date: Fri, 4 Nov 2022 22:13:01 +0100
From: Sven Peter <sven@...npeter.dev>
To: Marcel Holtmann <marcel@...tmann.org>,
Johan Hedberg <johan.hedberg@...il.com>,
Luiz Augusto von Dentz <luiz.dentz@...il.com>
Cc: Sven Peter <sven@...npeter.dev>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Hector Martin <marcan@...can.st>,
Alyssa Rosenzweig <alyssa@...enzweig.io>,
asahi@...ts.linux.dev, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-bluetooth@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v5 5/7] Bluetooth: Add quirk to disable extended scanning
Broadcom 4377 controllers found in Apple x86 Macs with the T2 chip
claim to support extended scanning when querying supported states,
< HCI Command: LE Read Supported St.. (0x08|0x001c) plen 0
> HCI Event: Command Complete (0x0e) plen 12
LE Read Supported States (0x08|0x001c) ncmd 1
Status: Success (0x00)
States: 0x000003ffffffffff
[...]
LE Set Extended Scan Parameters (Octet 37 - Bit 5)
LE Set Extended Scan Enable (Octet 37 - Bit 6)
[...]
, but then fail to actually implement the extended scanning:
< HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8
Own address type: Random (0x01)
Filter policy: Accept all advertisement (0x00)
PHYs: 0x01
Entry 0: LE 1M
Type: Active (0x01)
Interval: 11.250 msec (0x0012)
Window: 11.250 msec (0x0012)
> HCI Event: Command Complete (0x0e) plen 4
LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1
Status: Unknown HCI Command (0x01)
Signed-off-by: Sven Peter <sven@...npeter.dev>
---
include/net/bluetooth/hci.h | 10 ++++++++++
include/net/bluetooth/hci_core.h | 4 +++-
2 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index f4aa7b78a844..8cd89948f961 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -263,6 +263,16 @@ enum {
* during the hdev->setup vendor callback.
*/
HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN,
+
+ /*
+ * When this quirk is set, the HCI_OP_LE_SET_EXT_SCAN_ENABLE command is
+ * disabled. This is required for some Broadcom controllers which
+ * erroneously claim to support extended scanning.
+ *
+ * This quirk can be set before hci_register_dev is called or
+ * during the hdev->setup vendor callback.
+ */
+ HCI_QUIRK_BROKEN_EXT_SCAN,
};
/* HCI device flags */
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index c54bc71254af..3cd00be0fcd2 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -1689,7 +1689,9 @@ void hci_conn_del_sysfs(struct hci_conn *conn);
/* Use ext scanning if set ext scan param and ext scan enable is supported */
#define use_ext_scan(dev) (((dev)->commands[37] & 0x20) && \
- ((dev)->commands[37] & 0x40))
+ ((dev)->commands[37] & 0x40) && \
+ !test_bit(HCI_QUIRK_BROKEN_EXT_SCAN, &(dev)->quirks))
+
/* Use ext create connection if command is supported */
#define use_ext_conn(dev) ((dev)->commands[37] & 0x80)
--
2.25.1
Powered by blists - more mailing lists