[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20221104154047.6rtchfslvijqyxp6@skbuf>
Date: Fri, 4 Nov 2022 15:40:48 +0000
From: Vladimir Oltean <vladimir.oltean@....com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
CC: Maxime Chevallier <maxime.chevallier@...tlin.com>,
"davem@...emloft.net" <davem@...emloft.net>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Jakub Kicinski <kuba@...nel.org>,
Eric Dumazet <edumazet@...gle.com>,
Paolo Abeni <pabeni@...hat.com>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"thomas.petazzoni@...tlin.com" <thomas.petazzoni@...tlin.com>,
Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
Luka Perkov <luka.perkov@...tura.hr>,
Robert Marko <robert.marko@...tura.hr>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...ainline.org>
Subject: Re: [PATCH net-next v7 5/5] ARM: dts: qcom: ipq4019: Add description
for the IPQESS Ethernet controller
On Fri, Nov 04, 2022 at 11:08:07AM -0400, Krzysztof Kozlowski wrote:
> On 04/11/2022 10:32, Vladimir Oltean wrote:
> > On Fri, Nov 04, 2022 at 10:31:06AM -0400, Krzysztof Kozlowski wrote:
> >>> diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
> >>> index b23591110bd2..5fa1af147df9 100644
> >>> --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
> >>> +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
> >>> @@ -38,6 +38,7 @@ aliases {
> >>> spi1 = &blsp1_spi2;
> >>> i2c0 = &blsp1_i2c3;
> >>> i2c1 = &blsp1_i2c4;
> >>> + ethernet0 = &gmac;
> >>
> >> Hm, I have doubts about this one. Why alias is needed and why it is a
> >> property of a SoC? Not every board has Ethernet enabled, so this looks
> >> like board property.
> >>
> >> I also wonder why do you need it at all?
> >
> > In general, Ethernet aliases are needed so that the bootloader can fix
> > up the MAC address of each port's OF node with values it gets from the
> > U-Boot environment or an AT24 EEPROM or something like that.
>
> Assuming that's the case here, my other part of question remains - is
> this property of SoC or board? The buses (SPI, I2C) are properties of
> boards, even though were incorrectly put here. If the board has multiple
> ethernets, the final ordering is the property of the board, not SoC. I
> would assume that bootloader also configures the MAC address based on
> the board config, not per SoC...
I don't disagree. On NXP LS1028A, we also have all aliases in board
device trees and not in the SoC dtsi.
Powered by blists - more mailing lists