[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <Y2ZSVooZDBDnsKD3@matsya>
Date: Sat, 5 Nov 2022 17:38:54 +0530
From: Vinod Koul <vkoul@...nel.org>
To: Johan Hovold <johan+linaro@...nel.org>
Cc: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...ainline.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
linux-arm-msm@...r.kernel.org, linux-phy@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v4 09/16] phy: qcom-qmp-pcie: add register init helper
On 28-10-22, 15:35, Johan Hovold wrote:
> Generalise the serdes initialisation helper so that it can be used to
> initialise all the PHY registers (e.g. serdes, tx, rx, pcs).
>
> Note that this defers the ungating of the PIPE clock somewhat, which is
> fine as it isn't needed until starting the PHY.
>
> Signed-off-by: Johan Hovold <johan+linaro@...nel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 37 +++++-------------------
> 1 file changed, 8 insertions(+), 29 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> index 791ed7ef0eab..f57d10f20277 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> @@ -1820,27 +1820,22 @@ static void qmp_pcie_configure(void __iomem *base,
> qmp_pcie_configure_lane(base, tbl, num, 0xff);
> }
>
> -static void qmp_pcie_serdes_init(struct qmp_pcie *qmp, const struct qmp_phy_cfg_tables *tbls)
> -{
> - void __iomem *serdes = qmp->serdes;
> -
> - if (!tbls)
> - return;
> -
> - qmp_pcie_configure(serdes, tbls->serdes, tbls->serdes_num);
> -}
> -
> -static void qmp_pcie_lanes_init(struct qmp_pcie *qmp, const struct qmp_phy_cfg_tables *tbls)
> +static void qmp_pcie_init_registers(struct qmp_pcie *qmp, const struct qmp_phy_cfg_tables *tbls)
> {
> const struct qmp_phy_cfg *cfg = qmp->cfg;
> + void __iomem *serdes = qmp->serdes;
> void __iomem *tx = qmp->tx;
> void __iomem *rx = qmp->rx;
> void __iomem *tx2 = qmp->tx2;
> void __iomem *rx2 = qmp->rx2;
> + void __iomem *pcs = qmp->pcs;
> + void __iomem *pcs_misc = qmp->pcs_misc;
>
> if (!tbls)
> return;
>
> + qmp_pcie_configure(serdes, tbls->serdes, tbls->serdes_num);
We are tbls
> +
> qmp_pcie_configure_lane(tx, tbls->tx, tbls->tx_num, 1);
> qmp_pcie_configure_lane(rx, tbls->rx, tbls->rx_num, 1);
>
> @@ -1848,15 +1843,6 @@ static void qmp_pcie_lanes_init(struct qmp_pcie *qmp, const struct qmp_phy_cfg_t
> qmp_pcie_configure_lane(tx2, tbls->tx, tbls->tx_num, 2);
> qmp_pcie_configure_lane(rx2, tbls->rx, tbls->rx_num, 2);
> }
> -}
> -
> -static void qmp_pcie_pcs_init(struct qmp_pcie *qmp, const struct qmp_phy_cfg_tables *tbls)
> -{
> - void __iomem *pcs = qmp->pcs;
> - void __iomem *pcs_misc = qmp->pcs_misc;
> -
> - if (!tbls)
> - return;
>
> qmp_pcie_configure(pcs, tbls->pcs, tbls->pcs_num);
> qmp_pcie_configure(pcs_misc, tbls->pcs_misc, tbls->pcs_misc_num);
> @@ -1932,8 +1918,8 @@ static int qmp_pcie_power_on(struct phy *phy)
> else
> mode_tables = cfg->tables_ep;
>
> - qmp_pcie_serdes_init(qmp, &cfg->tables);
> - qmp_pcie_serdes_init(qmp, mode_tables);
> + qmp_pcie_init_registers(qmp, &cfg->tables);
> + qmp_pcie_init_registers(qmp, mode_tables);
but here tables :(
Lets stick with either please, or if we have differentiation lets make
it real obvious
>
> ret = clk_prepare_enable(qmp->pipe_clk);
> if (ret) {
> @@ -1941,13 +1927,6 @@ static int qmp_pcie_power_on(struct phy *phy)
> return ret;
> }
>
> - /* Tx, Rx, and PCS configurations */
> - qmp_pcie_lanes_init(qmp, &cfg->tables);
> - qmp_pcie_lanes_init(qmp, mode_tables);
> -
> - qmp_pcie_pcs_init(qmp, &cfg->tables);
> - qmp_pcie_pcs_init(qmp, mode_tables);
> -
> /* Pull PHY out of reset state */
> qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
>
> --
> 2.37.3
--
~Vinod
Powered by blists - more mailing lists